Vaxcel Mason W0412 Manual

Vaxcel Lys Mason W0412

Læs gratis den danske manual til Vaxcel Mason W0412 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vaxcel Mason W0412, eller vil du spørge andre brugere om produktet?

Side 1/2
W
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Page 1 / 2
220519
1. Attach mounting bracket to the outlet box
using two mounting screws (A).
2. Pull out the source wires from the
outlet box. Make wire connections
using wire connectors (B) as follows:
---Connect the hot wire (black insulation)
from the power source to the black wire from the fixture.
---Connect the neutral wire (white insulation) from the
power source to the white wire from the fixture.
---Attach the fixture ground wire (bare wire) to the
mounting plate with the green ground screw, or connect
to the source ground wire if available.
Carefully put the wires back into the outlet box.
3. Attach the fixture to the mounting bracket, then secure it with four assembly screws.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
W0412
Turn off the power at fuse or circuit box.
Installation Steps
Hardware Package (included):
Mounting Screw (A) Wire Connector (B)
Set Screw (C)
House Ground Wire
Fixture Ground Wire
Wire Connector (B)
Mounting Bracket
Outlet Box
Fixture Wire
Mounting Screw (A)
Green Ground Screw
Assembly Screw
Fixture
Set Screw (C)
Max. 60W Type A / ST Bulb
(not included)
Glass Shade


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Lys
Model: Mason W0412

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Mason W0412 stil et spørgsmål nedenfor, og andre brugere vil svare dig