Viking VK40 Manual

Viking Ikke kategoriseret VK40

Læs gratis den danske manual til Viking VK40 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Viking VK40, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

www. .co.ukmetaldetectors

Metal Detectors

1 Angela Street

Mill Hill, Blackburn

BB2 4DJ

t: +44 (0)1254 55887

f: +44 (0)1254 676901

e: viking@metaldetectors.co.uk

User Manual

Thank you for purchasing the VK40 metal

detector from VIKING. This is one of a family

of microprocessor driven metal detectors

that are very simple to use yet provide

excellent performance.

Please take time to read this booklet. It will guide

you through each of the available features to

ensure you get the best out of your detector.

Getting Started

1. Unpack The Detector

There are two main sections. The 'S' shaft, onto

which is mounted the control box, and the lower

shaft with the search head. Note the spring

button near the end of the lower shaft.

2. Assemble The Detector

Slide the lower shaft into the 'S' shaft, wrapping

the cable snugly, but not tightly, round the shaft.

When correctly aligned the spring button on the

lower shaft will click into 1 of the 3 holes on the

underside of the 'S' shaft.

3. Tighten the coupling

Turn the coupling to the 'lock' position as

indicated by the arrow. This makes a rigid

connection between the two parts of the shaft.

4. Insert Battery

The detector takes a single PP3 (alkaline) 9V

battery. This is placed in the battery

compartment on the rear of the control box.

ENSURE THE BATTERY IS INSERTED THE

CORRECT WAY ROUND

Push the drawer back into the detector until it

clicks. Please note the drawer can only be

inserted the one way.

Your detector is now ready for use

To disassemble the detector, loosen the coupling

by turning it against the arrow and push in the

spring button. The lower shaft will now slide out

from the 'S' shaft.

1. Detector Display

2. On / Off Key

3. Menu Down / Motion Key

4. Pinpoint / Retune Key

5. Menu Up / All-Metal / Non-Motion Key

6. Menu Key

Detection Modes

The VK40 offers 3 methods of detection:

Motion Mode

When operating in motion mode the search head

must be kept moving to enable an object to be

VK40

www. .co.ukmetaldetectors

Metal Detectors

1 Angela Street

Mill Hill, Blackburn

BB2 4DJ

t: +44 (0)1254 55887

f: +44 (0)1254 676901

e: viking@metaldetectors.co.uk

detected. In this mode the detector is silent until

an object is detected when it emits a sharp beep.

The sound occurs as the centre of the search

head passes the target object. This is the only

detection mode that provides discrimination.

All-Metal Mode

This mode provides a continuous faint audio

threshold tone, allowing the smallest signals to

be detected. In this mode the audio output will

continually, but slowly, retune to the threshold

level preventing the detector from drifting out of

tune, but requiring the search head to be kept

moving to detect items. This mode is not

available when detecting in Beach mode.

Non-Motion Mode

Similar to the All-Metal mode, this mode also

provides a faint audio threshold through the

speaker or headphones. In this mode the

detector does not automatically retune, but

enables the search head to be held stationary

over the target to allow accurate pinpointing. In

some cases changes in ground conditions and

temperature may cause the threshold to vary

from its faint preset level. In this case the

detector needs to be retuned,

Membrane Keypad

All the VK40's functions are controlled from the 5

keys on the front panel of the detector. Please

read this section carefully to understand how

these controls operate with each other.

Pressing this key once will turn the

detector on. When the detector has com

pleted its startup sequence and is in

detect mode, pressing this button again

will turn the detector off.

▼When the detector is operating, this key

will switch from the current detection

mode to Motion mode. When the detector

is in Menu mode, this button will decre

ment the currently selected setting.

PWhen the detector is in either Motion or

All-Metal detection modes, holding this

key will switch the detector into Non-

Motion mode until the key is released.

This allows for accurate pinpointing.

When the detector is working in Non-

Motion, holding this key retunes the

audio threshold to its preset level.

▲ When the detector is detecting in Motion

mode, pressing this key will switch to All-

Metal mode. Subsequent presses will

alternately switch the detector between

Non-Motion and All-Metal modes. When

the detector is in Menu mode, this key

will increment the currently selected

setting.

MENU This key switches the detector into Menu

mode, allowing the Sensitivity, Discrimination

and Ground settings to be adjusted and the Auto

Power Off feature to be enabled or disabled.

Detector Setup

The VK40 provides a menu system to alter the

detector settings which can aid with detecting.

These settings are: Discrimination, Sensitivity

and Ground. The effect of changing the value of

each of these is described below:

Discrimination

The Discrimination setting is used to alter the

detectors ability to ignore unwanted metal

objects when used in Motion mode. The higher

this setting, the more discriminating the detector

will be. When set at 0 all metal items will be

Produkt Specifikationer

Mærke:	Viking
Kategori:	Ikke kategoriseret
Model:	VK40

Har du brug for hjælp?

Hvis du har brug for hjælp til Viking VK40 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Viking Manualer

Viking VE-9X12Y-1P Manual

6 Juni 2025

Viking VE-9X12Y-2P Manual

6 Juni 2025

Viking VE-9X12Y-3P Manual

6 Juni 2025

Viking PROLPK1 Manual

31 Januar 2025

Viking PRONGK1 Manual

31 Januar 2025

Viking RD24CSTSS Manual

5 September 2024

Viking VBO1830S Manual

6 August 2024

Viking PDDP242 Manual

3 August 2024

Viking RD30BG6SS Manual

2 August 2024

Viking VSP30 Manual

1 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech EAI-3100 Manual

30 Juli 2025

Deye SUN-M180G4-EU-Q0-I Manual

30 Juli 2025

Crestron STIRP Manual

30 Juli 2025

Intellinet 790741 Manual

30 Juli 2025

Saris Edge 2-Bike Manual

30 Juli 2025

Advantech ROM-3310 Manual

30 Juli 2025

Advantech EKI-1751I Manual

30 Juli 2025

Advantech ICR-1601W Manual

30 Juli 2025

C2G 29341 Manual

30 Juli 2025

Advantech ITA-8120 Manual

30 Juli 2025