Vimar 02973.M Manual

Vimar Termostat 02973.M

Læs gratis den danske manual til Vimar 02973.M (3 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Vimar 02973.M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Viale Vicenza 14

36063 Marostica VI - Italy

www.vimar.com

02973 03 2207

02973 - Connected dial thermostat

SMART HOME VIEW WIRELESS

TWO OPERATING MODES (ALTERNATIVE)

Stand alone •

Download the View Wireless App from the stores onto the tablet/smartphone you

will be using for configuration.

When the device is powered for the rst conguration, we recommend you search for any

new rmware and perform the update.

Depending on the mode you select, you will need:

Stand alone

Nothing else

Gateway

art. 20597-19597-16497-14597

View App

for management via smartphone/tablet

Amazon Alexa, Google Assistant, Siri and Homekit voice

assistants for possible voice operation

Create your Installer account on MyVimar (on-line).

STAND ALONE CONFIGURATION

1. Wire all the thermostats.

2. Start the View Wireless App and log in with the credentials you just created.

3. Create the system and the environments.

4. Associate all the thermostats with the environments.

To associate the thermostat:

• Select “Add” ( ), choose the environment to place it and give it a name

• Select ; activate the Bluetooth connection on your tablet/smartphone and approach the

thermostat

• Press for 5 s; the ring ﬂashes blue and association is complete.

5. For each thermostat, set the functions and parameters.

6. Go to the “Temperature control” menu and for each thermostat set the time schedules, the

setpoints for the operating modes and the current time.

CONFIGURATION IN

1. Wire all the devices in the system (2-way switches, relays, thermostats, gateway, etc.).

2. Start the View Wireless App and log in with the credentials you just created.

3. Create the system and the environments.

4. Associate all the devices with the environments, except for the gateway (which should be

associated last).

To associate the thermostat:

• Select “Add” (

), choose the environment to place it and give it a name

• Select ; activate the Bluetooth connection on your tablet/smartphone and approach

the thermostat

• Press

for 5 s; the ring ﬂashes blue and association is complete.

5. For every device, set the function, the parameters and any accessory devices (wired or radio

control and related function).

6. Transfer the configuration of the devices to the gateway and connect it to the Wi-Fi network.

7. Transfer the system to the Administrator user (who must have created his/her profile on

MyVimar).

For full details, see the View Wireless App manual that can be downloaded from the www.

vimar.com website.

RESETTING THE THERMOSTAT

The reset restores the factory settings. Within the first 5 minutes of powering, press for 30

s; during these 30 s the ring flashes blue and then emits 2 white flashes to confirm the operation.

THERMOSTAT DATE/TIME SETTING

In the event of a mains voltage outage, if the thermostat is configured in Stand alone and the

“ON Mode”-“Automatic” is set, the date and time can be inserted directly on the device without

using the App.

Press ; you have entered the “Time entry” phase; during this phase, keys and ,

are not operational.

2. Turn the ring and display the number representing the desired day of the week (1=Monday,

2=Tuesday, 3=Wednesday and so on).

3. Confirm by pressing now proceed and set the time. ;

4. Turn the ring and display the number representing the hours (00, 01, 02 and so on all the way

to 23).

5. Confirm by pressing now proceed and set the minutes. ;

6. Turn the ring and display the number representing the minutes (00, 01, 02 and so on all the

way to 59).

7. ; Confirm by pressing the thermostat returns to the state it was in before the blackout and

the display and part 2 of the ring stop flashing.

• Short press = degrees Celsius/Fahrenheit selection

• Long press (5 s) = the thermostat enters the configuration phase (bt)

• Prolonged press (30 s) within the first 5 min of powering = device reset (rst)

Display brightness and RGB LED in standby setting

• 1st press = current brightness display

• Subsequent presses = cyclic display of available brightness values L-3 (high), L-2

(medium), L-1 (low) and L-0 (off).

Display

• bt = devices in Bluetooth configuration

• off = thermostat off; on = thermostat on

• °C = degrees Celsius; °F = degrees Fahrenheit

• L-0, L-1, L-2, L-3 = brightness in standby (from the lowest to the highest)

• H = heating; C = air conditioning

• opn = open window (associated with the thermostat via magnetic contact art.

03980)

Dial

Lightable ring

• Power on and off.

Upon power on or off, the thermostat starts in the last operating mode associated

with it set via the View App.

• Heating or air conditioning mode selection.

Ring signalling

All flashing blue = thermostat in configuration mode

All lit amber* = thermostat in heating mode and relay active

All lit blue** = thermostat in air conditioning mode and relay active

• Lit amber * = thermostat in heating mode and relay not active

• Lit blue ** = thermostat air conditioning mode and relay not active

In standby, the brightness is set during configuration; otherwise, the value is the

maximum one.

• Flashing red = the thermostat, in automatic mode, has lost the hourly value and

has therefore switched to manual mode.

When it receives the hourly value from the gateway again, the thermostat returns

to automatic mode and the flashing ends.

* Amber with automatic colour or of the selected colour.

** Blue with automatic colour or of the selected colour.

N.B. During the selection phases, the display and part 2 of the ring flash and key flashes red.

If no selection is made within 2 minutes, the thermostat quits the procedure.

To change the time without a blackout press

for 5 s and perform the procedure from point

1 to 7 above.

Produkt Specifikationer

Mærke:	Vimar
Kategori:	Termostat
Model:	02973.M

Har du brug for hjælp?

Hvis du har brug for hjælp til Vimar 02973.M stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat Vimar Manualer

9 November 2025

9 November 2025

8 November 2025

31 Oktober 2025

Vimar 09474.CM Manual

27 August 2025

26 August 2025

20 August 2025

20 August 2025

25 Juli 2025

24 Juli 2025

Termostat Manualer

Nyeste Termostat Manualer

Fantini Cosmi EC18RL Manual

18 December 2025

Fantini Cosmi L23EM1B Manual

17 December 2025

Fantini Cosmi Intellicomfort CH141AK Manual

16 December 2025

Fantini Cosmi Intellicomfort CH141E Manual

16 December 2025

Essentials MATRIX Manual

2 December 2025

Honeywell CT62B Manual

1 December 2025

Honeywell X2P RTH20B Manual

28 November 2025

Honeywell RTH2CWF Manual

27 November 2025

Honeywell CT60A1036 Manual

27 November 2025

Honeywell RLV4300A1005 Manual

27 November 2025