Vimar 21296 Manual

Vimar Stikkontakt 21296

Læs gratis den danske manual til Vimar 21296 (2 sider) i kategorien Stikkontakt. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Vimar 21296, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Viale Vicenza, 14 - 36063 Marostica VI - Italy

Tel. +39 0424 488 600 - Fax (Italia) +39 0424 488 188

Fax (Export) +39 0424 488 709

www.vimar.com

CLASS A GFCI 20A 125V

125V 15A RECEPT 60HZ

PAT.PEND.

T EST

RESET

LINE

GRN

HOT

WHITE

Receptacle

Outlet

Mounting

bracket

Grounding terminal (Green):

Connection for bare copper

or green wire

LINE

White terminal

(Silver):

Connection for

LINE cable’s

white wires

LOAD

White terminal

(Silver):

Connection for

LOAD cable’s

white wires

Screw (terminal) colors:

Green = Grounding terminal

Silver = White terminals

Brass = Hot terminals

LINE

Hot terminal (Brass):

Connection for the LINE

cable’s black wire

LOAD

Hot terminal (Brass):

Connection for the LINE

cable’s black wire

A yellow sticker covers

the LOAD terminals.

Do not remove the

sticker at this time

TEST button:

See “Procedure”

RESET button:

See “Procedure”

Trip

indicator light

49400555B0 02 1601

VIMAR - Marostica - Italy

Double 2P+E 15A 125 V 60 Hz socket outlet, American standard, with ground fault circuit interrupter (GFCI) and built-in mounting frame, to ~

complete with 3-module cover plate.

DESCRIPTION.

A GFCI receptacle is different from conventional receptacles. In the event of a ground

fault, a GFCI will trip and quickly stop the flow of electricity to prevent serious injury.

CHARACTERISTICS.

• Rated voltage 125 V 60 Hz.~

• Rated current corresponding to the socket outlet standard 15 A.

• GFCI Class A (trip 6 mA or more).

ATTENTION:

If you install the device in the Eikon Evo cover plate,

make sure to remove the side lugs as shown in the

picture beside.

Definition of a ground fault:

Instead of following its normal safe path, electricity passes through a person’s body

to reach the ground. For example, a defective appliance can cause a ground fault. A

GFCI receptacle does not protect against circuit overloads, short circuits, or shocks.

For example, you can still be shocked if you touch bare wires while standing on a

non-conducting surface, such as a wood floor.

TEST YOUR WORK.

Why perform this test?

• If you miswired the GFCI, it may not prevent personal injury or death due to a

ground fault. (electrical shock).

• If you mistakenly connect the LINE wires to the LOAD terminals, the GFCI will still

operate like an ordinary receptacle, but it will not interrupt a ground fault.

T EST

RESE

SET

TES

EST

RESET

TEST

RES

SET

Procedure:

(a) - This GFCI is shipped from the factory in the trip

ped condition and can not be reset until it is wired

correctly and power is supplied to the device.

Plug a lamp or radio into the GFCI (and leave it

plugged in). Turn the power ON at the service

panel. Press the RESET button fully, make sure

the lamp or radio is ON. If the lamp or radio is still

OFF or the RESET button can not be engaged,

go to the Troubleshooting section because LINE

and LOAD wiring connection have been reversed.

(b) Press the TEST button fully, the GFCI will trip

and the lamp or radio will be OFF. To restore

power, press the RESET button.

B, plug a lamp or radio into surrounding

receptacles to see which one(s), in addition to

the GFCI, lost power when you pressed the

TEST button. Do Not plug life saving devices

into any of the receptacles that lost power.

Place a “GFCI Protected” sticker on every

receptacle that lost power. Then press the

RESET button to reset the GFCI.

(d) Press the TEST button (then RESET button)

every month to assure proper operation. If the

GFCI can not be reset, then it must be replaced.

(e) If the GFCI consistently trips it indicates end of

life and GFCI must be replaced.

TROUBLESHOOTING.

Turn the power OFF and check the wire connections against the appropriate wiring

diagram in step CONNECTION A or CONNECTION B. Make sure that there are no loose

wires or loose connections. Also, it is possible that you reversed the LINE and LOAD

connections. LINE/LOAD reversal will be indicated by power remaining ON at the GFCI

after you press the GFCI’s TEST button. Reverse the LINE and LOAD connections if

necessary. Start the test from the beginning if you rewired any connections to the GFCI.

CAUTION.

To prevent severe shock or electrocution always turn the power OFF at the service

panel before working with wiring.

PLACEMENT IN CIRCUIT:

The GFCI’s place in the circuit determines if it protects other receptacles in the circuit.

Placing the GFCI in position A will also provide protection to “load side” receptacles B and C. On the other

hand, placing the GFCI in position C will not provide protection to receptacles A or B. Remember that

receptacles A, B and C can be in different rooms.

FRONT VIEW BACK VIEW

LINE

GRN

LOAD

HOT

WHIT E

LINE cable brings

power to the GFCI

Mounting box

LOAD cable feeds power

to other receptacle(s)

Grounding

connection to box

(if box has a

grounding terminal)

Wire connector

Yellow sticker remain

in place to cover the

LOAD terminals

LINE

GRN

HOT

WHIT E

ATTENTION

LINE cable brings

power to the GFCI

Wire connector

Mounting box

Grounding

connection to box

(if box has a

grounding terminal)

CONNECTION B.

CONNECTION A.

T EST

RESET

LINE

LOAD

LINE

LOAD

LINE

B C

Service

Panel

SAMPLE CIRCUIT:

Eikon Evo

21296

Idea

16296

Plana

14296

Arké

19296

• Use this GFCI receptacle with copper or copper-clad wire. Do not use it with aluminum wire.

• Do not install this GFCI receptacle on a circuit that powers life support equipment because if the GFCI

trips it will shut down the equipment.

Must be installed by a skilled person in accordance with national and local electrical codes.

EIKON EVO

MADE

ITALY

Produkt Specifikationer

Mærke:	Vimar
Kategori:	Stikkontakt
Model:	21296

Har du brug for hjælp?

Hvis du har brug for hjælp til Vimar 21296 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stikkontakt Vimar Manualer

Vimar 20335.B Manual

15 December 2024

Vimar 20266.C.B Manual

15 December 2024

Vimar 20223.A Manual

15 December 2024

Vimar 20224.AC Manual

15 December 2024

Vimar 20335.N Manual

15 December 2024

Vimar 20224.CC Manual

15 December 2024

Vimar 20266.A.N Manual

15 December 2024

Vimar 14345 Manual

15 December 2024

Vimar 14223.A Manual

15 December 2024

Vimar 14266.C Manual

15 December 2024

Stikkontakt Manualer

Nyeste Stikkontakt Manualer

Adam Hall 87478 Manual

11 September 2025

Adam Hall 87471 T Manual

11 September 2025

Ikea ENHET 405.161.10 Manual

4 September 2025

Strong HELO-PLUG Manual

9 August 2025

Emos P0071 Manual

31 Juli 2025

Brennenstuhl BSV 2 Manual

30 Juli 2025

Biltema 10-264 Manual

25 Juli 2025

Brennenstuhl BSV 4 Manual

7 Juli 2025

Asus PRIME Z270-A Manual

3 April 2025

Asus PRIME B450-PLUS Manual

3 April 2025