Vollrath 55457 Manual

Vollrath Skæremaskine 55457

Læs gratis den danske manual til Vollrath 55457 (12 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vollrath 55457, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Operator’s Manual

Instacut™ 5.1 Slicer, Dicer, Wedger and Corer

2019 The Vollrath Company L.L.C. Part No. 351753-1 ml 1/30/19

Thank you for purchasing this Vollrath equipment. Before operating the

equipment, read and familiarize yourself with the following operating

and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE

REFERENCE. Save the original box and packaging. Use this packaging

to ship the equipment if repairs are needed.

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand

their meaning. This manual contains safety precautions which are

explained below. Please read carefully.

Warning is used to indicate the presence of a hazard that will or can

cause severe personal injury or death.

Caution is used to indicate the presence of a hazard that will or can

cause minor or major personal injury if the caution is ignored.

NOTICE: Notice is used to note information that is important but not

hazard-related.

To reduce risk of injury or damage to the equipment:

• Inspect the equipment before each use to make sure it is clean.

• Inspect for broken, nicked or dull blades and if found, replace the

blade assembly.

• Verify the pusher block head assembly and blade pack are a matched

set and are properly aligned.

• Lubricate the guide rods as instructed, using a light coating of

mineral oil, Petrol-Gel, or other food grade lubricant. DO NOT USE

COOKING OIL AS IT WILL BECOME STICKY AND MAY

PERMANENTLY DAMAGE THE EQUIPMENT.

FUNCTION AND PURPOSE

The InstaCut™ 5.1 manual food processor is intended for slicing,

dicing, wedging and coring soft vegetables and fruits. It not intended to

cut hard root vegetables such as carrots and sweet potatoes.

WARNING

CAUTION

Item No. Description

55457 ¼" Dice

55458 " Dice³⁄₈

55459 " Dice½

55460 ¼" Slice

55461 " Slice³⁄₈

55462 " Slice½

55463 4 Section Wedge

55464 6 Section Wedge

55465 8 Section Wedge

55466 10 Section Wedge

55467 12 Section Wedge

55468 6 Section Core

55469 8 Section Core

2 Instacut

™

5.1 Slicer, Dicer, Wedger and Corer Operator’s Manual

FEATURES

BEFORE FIRST USE

Clean the equipment. See the Cleaning section of this manual.

OPERATION

Prepare the Food

Prepare the food to be processed. Maximum food size for:

• Slicing and dicing: 5" (12.7 cm) wide.

• Wedging and coring: 3 " (8.9 cm) in diameter.½

Prepare the Equipment

1. Verify the blade assembly and pusher block match. Each component

must be for the same size slice, dice, core or wedge.

2. Verify the equipment is clean and the blades are in good condition. If

blades are loose, broken or dull, replace the blade assembly.

3. Place the equipment on a clean, flat work surface.

4. Verify the bumpers are in place on the guide rods. DO NOT USE

EQUIPMENT IF BUMPERS ARE NOT IN PLACE.

NOTICE: Using this equipment without the bumpers in place may

damage the equipment.

5. Verify the blade assembly is properly installed in the base. The

thumb screw must be fully tightened and the blade assembly fully

tight against the side of the frame opposite the thumbsrew.

A Base Assembly

B Bumpers

C Guide Rods

D Thumbscrew

E T-Handle

F T-Handle Assembly. Consists of the pusher head, cleaning tool

and the pusher block.

G Cleaning Tool. (Dicer and slicer blade packs only)

H Pusher Block. Pushes the food product through the blade

assembly. Must match the slice, dice, core or wedge size of

blade assembly.

I Blade Assembly. Houses the blades, wedger or corer. Must

match the slice, dice, core or wedge size of the pusher head

block.

WARNING

Sharp Blade Hazard

Blades are sharp and can cause cuts. To avoid injury from

sharp blades, handle with caution.

Fully tight.

No space.

Thumbscrew

Produkt Specifikationer

Mærke:	Vollrath
Kategori:	Skæremaskine
Model:	55457

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath 55457 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Vollrath Manualer

Vollrath 55457 Manual

16 Juni 2025

Vollrath 15203 Manual

15 Juni 2025

Vollrath 55459 Manual

15 Juni 2025

Vollrath Cube King 1811 Manual

15 Juni 2025

Vollrath Cheese Blocker 1837 Manual

15 Juni 2025

Vollrath 47715 Manual

15 Juni 2025

Vollrath Cube King 1812 Manual

14 Juni 2025

Vollrath 401N Manual

14 Juni 2025

Vollrath 503N Manual

14 Juni 2025

Vollrath 55010 Manual

14 Juni 2025

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Nemco 55450-4 Manual

16 Juni 2025

GARDE 181CHEESE34 Manual

15 Juni 2025

GARDE 181CHKSLC14 Manual

15 Juni 2025

GARDE 181CHKSLC12 Manual

15 Juni 2025

Choice 407LETCUT12 Manual

15 Juni 2025

Choice 407CHEESECMB Manual

15 Juni 2025

15 Juni 2025

15 Juni 2025

15 Juni 2025

15 Juni 2025