VXi CC Pro 4010G Manual

VXi Headset CC Pro 4010G

Læs gratis den danske manual til VXi CC Pro 4010G (8 sider) i kategorien Headset. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om VXi CC Pro 4010G, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

HOW TO WEAR AND ADJUST YOUR HEADSET

1. Place the headset on your head.

2. Position the speaker(s) directly on your ear(s). You can slide the headband in

or out of the side support for proper fit.

3. Position the microphone about one finger’s width away from your face at the

corner of your mouth. The last several inches of the microphone boom are

quite flexible, so you can bend it toward your mouth as needed for optimum

sound quality.

4. The headband is also very flexible and can be adjusted by gently flexing

outward to loosen or inward to tighten.

Note: The VXi CC Pro Headset features a quick disconnect. A lower cord or adapter is

required for connecting this headset to your device.

If you need additional technical assistance or product information,

please call VXi Technical Support, toll-free at (800) 742-8588.

VXi CC Pro™Headset Instructions

Simple to set up and use.

Adjust the flexible microphone

boom for proper positioning.

Gently flex headband outward

to loosen or inward to tighten.

1. VXi warrants that your product will be free from defects in material and workmanship for two (2) years from the date of purchase. If, during

the first two years from the date of purchase, your product fails to work due to a defect in material or workmanship, VXi will repair or

replace the product, at its election, free of charge. Without a proof of purchase, the warranty period begins on the date of manufacture.

2. The foregoing limited warranty does not cover equipment failure attributable to accident, improper operation, misuse, abuse, or any cause

other than defects in the materials or workmanship of VXi’s products.

3. VXi’s obligations under this warranty are limited to repair or replacement (at our option) of any defective part returned to VXi at the customer’s

expense. Returned products require a Return Authorization (RA) number that may be obtained online at www.vxicorp.com/customer-care

or by calling VXi toll-free in the U.S. and Canada at 800-742-8588, or at +1-603-742-2888 for international callers. Products returned

to VXi for repair under this warranty will be return shipped to the customer at VXi’s expense.

4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not permit the exclusion of implied warranties

and the foregoing exclusions may not apply to you.

5. In no event shall VXi be responsible for any other damages, including direct, indirect, special, incidental, consequential, or other damages

for breach of this or any other warranty, express or implied.

For more information regarding VXi’s warranty, please visit our website at

www.vxicorp.com/customer-care/service-and-repair/warranty-policies.

VXi Warranty

271 Locust Street | Dover, NH 03820 | Phone: 603-742-2888 | Toll Free : 800-742-8588 | www.vxicorp.com

Produkt Specifikationer

Mærke:	VXi
Kategori:	Headset
Model:	CC Pro 4010G
Vægt:	68 g
Produktfarve:	Sort
Produkttype:	Headset
Pakkevægt:	85 g
Pakkedybde:	152.4 mm
Pakkebredde:	152.4 mm
Pakkehøjde:	25.4 mm
Antal:	1
Anbefalet brug:	Kontor/Callcenter
Impedens:	310 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Bæremåde:	Headset
Headset type:	Mono
USB-tilslutning:	Ja
Hovedtelefon frekvens:	100 - 6800 Hz
Hovedtelefon følsomhed:	118 dB
Mikrofontype:	Boom
Mikrofon frekvens:	150 - 6800 Hz
Ørekobling:	Supraaural
Støjreducerende mikrofon:	Ja