Wagner SprayTech FlexiO 990 Manual

Wagner SprayTech malingssprøjte FlexiO 990

Læs gratis den danske manual til Wagner SprayTech FlexiO 990 (28 sider) i kategorien malingssprøjte. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Wagner SprayTech FlexiO 990, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
EnglishFrançaisEspañol
0716 • Form No. 0529403G
Owner’s Manual
Read this manual for complete instructions
Français (page 21) / Español (página 41)
Contents
2 Important Safety Information
4 Controls and Functions
5 Overview
6Setup
7Preparing to Spray
8Power and Material Controls
9 Spray Pattern Adjustment
10 Proper Spraying Technique
12 Cleanup
16 Maintenance
17 Troubleshooting
18 Control Finish Nozzle Setup
61 Parts List
68 Warranty
Questions?
Call Wagner Technical Service at:
1-800-328-8251
Register your product online at:
www.wagnerspraytech.com
English
2 © Wagner Spray Tech - All Rights Reserved
Important Safety Information
Read all safety information before
operating the equipment. Save these
instructions.
Indicates a hazardous situation which,
if not avoided, could result in death or
serious injury.
To reduce the risks of re or explosion,
electrical shock and the injury to
persons, read and understand all
instructions included in this manual. Be
familiar with the controls and proper
usage of the equipment.
Grounding Instructions
This product must be grounded. In the event of an
electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for
the electric current. This product is equipped with a
cord having a grounding wire with an appropriate
grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING - Improper installation of
the grounding plug can result in a risk
of electric shock.
If repair or replacement of the cord or plug is
necessary, do not connect the green grounding wire
to either at blade terminal. The wire with insulation
having a green outer surface with or without yellow
stripes is the grounding wire and must be connected
to the grounding pin.
Check with a qualied electrician or serviceman
if the grounding instructions are not completely
understood, or if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided. If the plug will not t the outlet, have
the proper outlet installed by a qualied electrician.
This product is for use on a nominal 120 volt
circuit and has a grounding plug that looks like
the plug illustrated below. Make sure that the
product is connected to an outlet having the same
conguration as the plug. No adapter should be
used with this product.
Grounded Outlet
Grounding Pin
Cover for grounded outlet box
WARNING - To reduce the risk
of re or explosion:
1. Do not spray ammable or combustible
materials near an open ame, pilot lights
or sources of ignition such as hot objects,
cigarettes, motors, electrical equipment and
electrical appliances. Avoid creating sparks
from connecting and disconnecting power
cords.
2. For use with only water-based or mineral
spirit-type materials with a minimum ash point
of 100º F (38ºC) — Do not spray or clean with
liquids having a ash point of less than 100º F
(38ºC). Flash point is the temperature at which
a uid can produce enough vapor to ignite.
3. Verify that all containers and collection systems
are grounded to prevent static discharge.
4. Connect to a grounded outlet and use
grounded extension cords (electric models
only). Do not use a 3 to 2 adapter.
5. Keep spray area well ventilated. Keep a good
supply of fresh air moving through the area
to keep the air within the spray area free from
accumulation of ammable vapors.
6. Do not smoke in the spray area.
7. Do not operate light switches, engines, or
similar spark producing products in the spray
area.
8. Keep area clean and free of paint or solvent
containers, rags, and other ammable materials.
9. Know the contents of the paint and solvents
being sprayed. Read all Material Safety Data
Sheets (MSDS) and container labels provided
with the paints and solvents. Follow the paint
and solvent manufacture’s safety instructions.
10. Fire extinguisher equipment shall be present
and working.

Produkt Specifikationer

Mærke: Wagner SprayTech
Kategori: malingssprøjte
Model: FlexiO 990

Har du brug for hjælp?

Hvis du har brug for hjælp til Wagner SprayTech FlexiO 990 stil et spørgsmål nedenfor, og andre brugere vil svare dig


malingssprøjte Wagner SprayTech Manualer

Wagner SprayTech

Wagner SprayTech FlexiO 990 Manual

15 August 2024
Wagner SprayTech

Wagner SprayTech Power Painter Manual

13 August 2024
Wagner SprayTech

Wagner SprayTech FLEXiO 590 Manual

11 August 2024
Wagner SprayTech

Wagner SprayTech FLEXiO 570 Manual

8 August 2024
Wagner SprayTech

Wagner SprayTech Control 150 M Manual

6 August 2024

malingssprøjte Manualer

Nyeste malingssprøjte Manualer

Worx

Worx WX020 Manual

3 Januar 2025
Wagner

Wagner FineCoat 9900 Plus Manual

30 December 2025
Ozito

Ozito PXOSGK-250 Manual

29 December 2024
Wagner

Wagner W 320 Manual

2 Oktober 2024
Abac

Abac G-542F Manual

6 September 2024
Abac

Abac G-540F Manual

6 September 2024
Abac

Abac G-550F Manual

6 September 2024
Abac

Abac G-551A Manual

6 September 2024
Wagner

Wagner SteamForce Speed Pro Manual

5 September 2024
Einhell

Einhell BT-FSS 500 Manual

2 September 2024