Wagner SprayTech Power Painter Manual

Wagner SprayTech malingssprøjte Power Painter

Læs gratis den danske manual til Wagner SprayTech Power Painter (19 sider) i kategorien malingssprøjte. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Wagner SprayTech Power Painter, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/19
English
Owner’s Manual
Read this manual for complete instructions
Table of Contents
Safety Information ................................................... 2
What’s in the Box .................................................... 3
Before you Begin ..................................................... 4
Selecting the proper spray tip............................. 4
Important preparation tips .................................. 4
Setup ......................................................................5-6
Material container setup ..................................... 5
Remote suction set setup ................................... 6
Flow Control Knob / Practice Spraying ................. 7
Material thinning ................................................. 7
Usage ........................................................................ 8
Priming with remote suction set ......................... 8
Spraying (Overspray) ......................................... 8
Spray Technique...................................................... 9
Cleanup - Latex Materials ................................10-11
Cleaning the material container........................ 10
Cleaning the remote suction set ....................... 11
Cleanup - Oil-based Materials .............................. 12
Cleaning the material container........................ 12
Cleaning the remote suction set ....................... 13
Cleaning the Components .................................... 14
Reassembly............................................................ 14
Maintenance ........................................................... 15
Replacement parts ................................................ 15
Troubleshooting .................................................... 16
Product registration .......................................... 16
Parts List ...........................................................50-51
Warranty ................................................................. 52
0109 • Form No. 0525800B
1-800-328-8251
Wagner Technical Service
1770 Fernbrook Lane, Plymouth, MN 55447
http://www.wagnerspraytech.com
Register your product online at:
Need Help? Call us rst for answers fast.
Call Wagner Spray Tech toll-free if you have any
comments or problems with this product.
Technical service hours: Monday through Friday, 8:00 am to 7:00 pm Central Time
This symbol indicates a hazardous situation, which, if not
not avoided could result in death or serious injury.
HAZARD: INJECTION INJURY
A high pressure stream of paint produced by this equipment
can pierce the skin and underlying tissues, leading to serious
injury and possible amputation.
DO NOT TREAT AN INJECTION INJURY AS A SIMPLE
CUT! Injection can lead to amputation. See a physician
immediately.
NOTE TO PHYSICIAN:
Injection into the skin is a traumatic injury. It is important to treat
the injury surgically as soon as possible. DO NOT delay treatment to
research toxicity. Toxicity is a concern with some coatings injected
directly into the blood stream. Consultation with a plastic surgeon or
reconstructive hand surgeon may be advisable.
PREVENTION:
• NEVER aim the gun at any part of the body.
• Do not aim the gun at, or spray any person or animal.
• NEVER allow any part of the body to come in contact with the uid
stream.
• NEVER put your hand in front of the gun. Wear gloves. Gloves will
not provide protection against an injection injury.
• Keep hands and other body parts away from the discharge. For
example, do not try to stop leaks with any part of the body.
• Always unplug the spray gun before servicing, cleaning tip guard,
changing tips, or leaving unattended.
• Always use the nozzle tip guard. Do not spray without nozzle tip
guard in place.The tip guard provides some protection against
injection injuries but is mainly a warning device. Only use a nozzle
tip specied by Wagner.
HAZARD: EXPLOSION OR FIRE
Solvent and paint fumes can explode or ignite, causing
property damage and/or severe injury.
PREVENTION:
• Exhaust and fresh air introduction must be provided
to keep the air within the spray area free from accumulation of
ammable vapors.
• Avoid all ignition sources such as static electricity
sparks, open ames, pilot lights, hot objects,
cigarettes, and sparks from connecting and
disconnecting power cords or working light switches.
• Fire extinguishing equipment must be present and in
good working order.
• Follow the material and solvent manufacturer’s safety precautions
and warnings.
• Do not spray ammable or combustable materials near an open
ame or sources of ignition such as cigarettes, motors, and electrical
equipment.
• Know the contents of the paints and solvents being sprayed. Read
all Material Safety Data Sheets (MSDS) and container labels
provided with the paints and solvents. Follow the paint and solvent
manufacturer’s safety instructions.
HAZARD: EXPLOSION HAZARD DUE TO
INCOMPATIBLE MATERIALS
Will cause property damage or severe injury.
PREVENTION:
• Do not use bleach.
• Do not use halogenated hydrocarbon solvents such as methylene
chloride and 1,1,1 - trichloroethane. They are not compatible with
aluminum and may cause an explosion. If you are unsure of a
material’s compatibility with aluminum, contact your coating supplier.
English
2
Important Safety Information · Read all safety information before operating
the equipment. SAVE THESE INSTRUCTIONS.
To reduce the risks of re or explosion, electrical shock and the injury to persons, read and understand all instructions included in
this manual. Be familiar with the controls and proper usage of the equipment.
HAZARD: HAZARDOUS VAPORS
Paints, solvents, insecticides, and other materials can be
harmful if inhaled or come in contact with the body. Vapors
can cause severe nausea, fainting, or poisoning.
PREVENTION:
• Use a respirator or mask if vapors can be inhaled.
Read all instructions supplied with the mask to be
sure it will provide the necessary protection.
• Wear protective eyewear.
• Wear protective clothing as required by coating manufacturer.
HAZARD: GENERAL
Can cause severe injury or property damage.
PREVENTION:
• Read all instructions and safety precautions for equipment and
spray material before operating any equipment.
• Comply with all appropriate local, state, and national codes
governing ventilation, re prevention, and operation.
• Keep sprayer out of the reach of children.
• Hearing protection is recommended for extended use.
• Always wear appropriate gloves, eye protection and a respirator or
mask when painting.
• Do not operate or spray near children. Keep children away from
equipment at all times.
• Do not overreach or stand on an unstable support. Keep effective
footing and balance at all times.
• Stay alert and watch what you are doing.
• Do not operate the unit when fatigued or under the inuence of
drugs or alcohol.
HAZARD: ELECTRIC SHOCK HAZARD
May cause severe injury.
PREVENTION:
• Keep electrical cord plug and spray gun trigger free
from paint and other liquids. Never hold cord at plug connections to
support cord. Failure to observe may result in an electrical shock.
• Never immerse electrical parts in water or any other liquid. Wipe the
exterior of the sprayer with a damp cloth for cleaning. Always make
sure the sprayer is unplugged before taking it apart for cleaning.
IMPORTANT: Use only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will accept the plug on the
product. Make sure your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. For lengths less than 50 feet, use a No.
18 AWG extension cord. For lengths more than 50 feet, use a No. 14 or
No. 16 AWG extension cord. An undersized cord will cause a drop in
line voltage resulting in loss of power and overheating.
Wagner Spray Tech accessory extension cords recommended:
P/N 0090241 20 foot extension cord.
P/N 0090242 35 foot extension cord.
Minimum gauge for extension cords
Cord length (feet)Voltage
Ampere
rating
range
2 - 3
120V
25-50
100 150 200 250 300 400 500
18
16 14 14 12 12 10 10

Produkt Specifikationer

Mærke: Wagner SprayTech
Kategori: malingssprøjte
Model: Power Painter

Har du brug for hjælp?

Hvis du har brug for hjælp til Wagner SprayTech Power Painter stil et spørgsmål nedenfor, og andre brugere vil svare dig


malingssprøjte Wagner SprayTech Manualer

Wagner SprayTech

Wagner SprayTech FlexiO 990 Manual

15 August 2024
Wagner SprayTech

Wagner SprayTech Power Painter Manual

13 August 2024
Wagner SprayTech

Wagner SprayTech FLEXiO 590 Manual

11 August 2024
Wagner SprayTech

Wagner SprayTech FLEXiO 570 Manual

8 August 2024
Wagner SprayTech

Wagner SprayTech Control 150 M Manual

6 August 2024

malingssprøjte Manualer

Nyeste malingssprøjte Manualer

Worx

Worx WX020 Manual

3 Januar 2025
Wagner

Wagner FineCoat 9900 Plus Manual

30 December 2025
Ozito

Ozito PXOSGK-250 Manual

29 December 2024
Wagner

Wagner W 320 Manual

2 Oktober 2024
Abac

Abac G-542F Manual

6 September 2024
Abac

Abac G-540F Manual

6 September 2024
Abac

Abac G-550F Manual

6 September 2024
Abac

Abac G-551A Manual

6 September 2024
Wagner

Wagner SteamForce Speed Pro Manual

5 September 2024
Einhell

Einhell BT-FSS 500 Manual

2 September 2024