Wahl Bravmini + Manual

Wahl barbermaskine Bravmini +

Læs gratis den danske manual til Wahl Bravmini + (4 sider) i kategorien barbermaskine. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Wahl Bravmini +, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

General safety instructions

Intended use

·· Only use hair clippers to cut human hair, beard hair and eyebrows.

·· Only use animal clippers to cut animal hair and animal fur.

Requirements on the user

·· Read the operation manual in full and familiarise yourself with it before the first use.

·· This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that

they do not play with the appliance.

·· Keep the appliance out of reach of animals and protected against the effects of the weather.

Hazards

Please adhere to the following safety instructions!

Danger!

Electric shock due to damage to appliance/plug-in transformer.

}

Do not use the appliance if it is not working correctly, if it is damaged or if it has fallen into water. Repairs may only be performed at an authorised service

centre using original spare parts in order to avoid hazards.

}

Never use the appliance if the mains cable or plug-in transformer is damaged. A damaged mains cable or plug-in transformer may only be replaced with an

original spare part by an authorised service centre or another similarly qualified person in order to avoid hazards.

}

Only specialists properly trained in the handling of electrotechnical appliances may repair electrical equipment.

Danger!

Electric shock due to penetration of liquid.

}

Never touch electrical equipment that has fallen into water. Disconnect from the mains immediately.

}

Never use electrical equipment in the bath or under the shower.

}

Always position or store electrical equipment where it cannot fall into water (e.g. washbasin). Prevent electrical equipment from coming into contact with water

and other liquids.

}

Only use and store the appliance in dry rooms.

}

As additional safety measure, it is recommended that a tested residual current appliance (RCD) with a residual operating current of not more than 30 mA be installed in

the bathroom circuit.

Danger of explosion!

}

Never use the appliance where aerosol (spray) products are being used or where oxygen is released.

}

Do not attempt to replace the battery.

}

Do not expose the appliance to temperatures below 0°C and above +40°C for any length of time. Avoid direct exposure to sunlight.

Warning! Injuries due to incorrect handling.

}

To prevent injury, never use the appliance if the blade set is damaged.

}

Always switch the appliance off before storage, as the appliance can fall down due to the vibrations.

Handle with care! Damage due to incorrect power supply.

}

Only operate the appliance with an alternating current and with the voltage stated on the nameplate.

Handle with care! Injuries due to incorrect handling.

}

Only use accessories recommended by the manufacturer.

}

Only use the plug-in transformer that is included in the delivery for charging the appliance. Only replace defect plug-in transformers with original spare parts, which you

can order via our service centres.

P R O F E S S I O N A L

RECHARGEABLE TRIMMER

}

Never insert or allow objects to fall into the openings of the appliance.

}

When disconnecting the appliance from the mains, never pull on the mains cable or on the appliance itself.

}

Do not wind the mains cable around the appliance.

}

Keep the mains cable and appliance away from hot surfaces.

}

Make sure that the mains cable is not twisted or kinked when charging or storing.

}

Do not use disposable batteries. Batteries should only be replaced at authorised service centres.

General user information

Information about using the operation manual

}

Before using the appliance for the first time, you must read and understand the operation manual completely.

}

Consider the operation manual as part of the product and store it in a safe and accessible place.

}

Include this operation manual if passing the appliance on to a third party.

}

In case of conflicts with national safety specifications or instructions, the national requirements must be followed.

Explanation of symbols and notes

DANGER

Danger of electric shock which may result in serious physical injury or death.

DANGER

Danger of explosion which may result in serious physical injury or death.

WARNING

Warning of possible physical injury or a health risk.

CAUTION

Information about danger of material damage.

Note with useful information and tips.

}

Action to be taken by owner.

1. Carry out these actions in the sequence described.

Product description

Description of parts (Fig. 1)

A Blade set

B On/off switch

C Charging indicator

D Charging stand

E Charging stand socket

F Oil for blade set

G Cleaning brush

H Attachment comb

I Plug-in transformer

J Appliance plug

Technical data

Hand-held appliance

Drive unit: DC motor

Battery: NiMH battery

Operating time: up to 100 minutes

Dimensions (LxWxH): 141 x 32 x 29 mm

Weight: approx. 132 g

Emission sound pressure level: max. 60 dB(A) @ 25 cm

Vibration: < 2,5 m/s2

Charging stand

Dimensions

with accessories (LxWxH): 72 x 96 x 58 mm

Weight: approx. 61 g

Plug-in transformer

Type adapter 6000

Power consumption: max. 12 W

Operating voltage: 100 – 240 V / 50 – 60 Hz

The appliance is safety insulated and radio screened. It meets

the requirements of EU Electromagnetic Compatibility Directive

2004/108/EC and Machinery Directive 2006/42/EC.

Operation

Preparation

Keep the packaging material for safe storage or transport later.

}

Check that the contents are complete.

}

Check all the parts for possible transport damage.

Safety

Handle with care! Damage due to incorrect power supply.

Only operate the appliance with an alternating current and with the voltage stated on the nameplate.

Charging the battery

Before the appliance is used for the first time, it should be charged for approx. 2 hours!

1. Connect the appliance plug (J) on the plug-in transformer to the charging stand socket (E) (Fig. 2ⓐ).

Battery overcharging is prevented thanks to intelligent charge management.

2. Connect the plug-in transformer to the mains socket (Fig. 2ⓐ).

3. Switch off the appliance using the on/off switch (Fig. 3ⓐ).

4. Place the appliance on the charging station (Fig. 2)

·· During charging, the charging indicator (C) flashes at evenly spaced intervals. When the battery is fully charged, the charging indicator flashes at a different rate (10

on / 1 off).