Wampler Cory Wong Manual

Wampler Ikke kategoriseret Cory Wong

Læs gratis den danske manual til Wampler Cory Wong (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Wampler Cory Wong, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Cory Wong is a Grammy-nominated artist

renowned for laying down some of the nest

grooves across all genres. The Wampler

Cory Wong Compressor is at the heart of his

legendary tone. More than just a Compressor

and a Boost pedal, this dynamic toolkit

shapes your tone with sparkling cleans and

responsive compression either direct to your

amp or straight into your recording interface.

Prepare to nd the funk!

The Wampler EGO compressor has been an integral part of

Cory Wong’s signature sound for years, providing the light touch required to subtly drive the best from his

tone, so this was a natural starting point for designing his signature pedal. Cory’s vision included some very

specic features including an XLR out so he could go straight into a computer interface, mixing desk, or

PA for those signature bright and clean tones. He also wanted to add a boost that allowed him to choose

either a at volume boost or a rich, saturated boost that could push his midrange a little, all in a compact

pedal enclosure with two foot-switches and an always-ON mode allowing stage friendly operation.

The Wampler Cory Wong compressor features two soft footswitches that operate each function of the

pedal with a three-color LED indicator to show which mode is active. The Compressor side offers complete

control over Volume, Sustain, Attack, and Blend as well as Brian Wampler’s signature Tone control which can

be dialed in to add sparkle and chime to your guitar’s tone. On the boost side, a single rotary boost control

adjusts the amount of boost activated and a prole switch sets the mode of the boost circuit from a at

boost to a rich saturated boost with an extra vibrancy around the 550Hz range. Combine both channels for

glorious compression and a powerful lead boost.

The Cory Wong Compressor is a complete solution for sculpting tone either on the stage or in the studio.

• Exclusive Cory Wong Signature Compressor + Boost

• High quality op-amp buffered bypass

• Dual switch-able modes (Compression and Boost) in

a single enclosure

• Boost mode switch for either a full frequency or rich

saturated mid boost

• XLR Out and Ground Lift switch for direct connection

to PA, Mixer, or Audio Interface

• Attack, Tone, Sustain, Volume and Blend controls for

compressor

• Separate Boost level control

• Unique “Comp On” switch to permanently engage

compressor

• High-grade components selected for superior sound

and response

• Top mounted input and output jacks and power

connector

• Dimensions: 2.5” x 4.6” x 1.5″ (64 mm x 120mm x

38mm) – height excludes knobs and switches

• Power draw: 30mA, 9V DC - Do not exceed 9V DC

• Includes limited 5-year warranty

• Built in the U.S.A

The Wampler Cory Wong compressor features two soft footswitches that operate each

function of the pedal. For the Compressor side there is also complete control over Volume,

Sustain, Attack, and Blend as well as Brian Wampler’s signature Tone control which can be

dialed in to add sparkle and chime to your guitar’s tone.

For the boost side there is a single rotary boost control that adjusts the amount of boost

activated and a prole switch that sets the mode of the boost circuit from a at boost to a rich

saturated boost with an extra vibrancy around the 550Hz range. The Blend control controls

the amount of dry and compressed signal in the compressor circuit.

The Compressor is operated by the independent “Compress” footswitch on the left, the LED

will turn green when active. The Boost is controlled by the independent “Boost” footswitch on

the right and the LED will turn blue when the boost is active. This particular boost was based

on the classic MDX Strat boost style circuitry once favored by Eric Clapton. When both sides

are active, the LED turns Rainbow white. On the right hand side of the pedal there is a “Comp

On” switch which permanently engages the compressor circuit when depressed - useful for a

live environment where you want to really just stomp down for boost. The left hand side has an

XLR socket to go direct to a PA system or mixing board, and a “Ground Lift” switch which can

be used to eliminate unwanted ground noise if it is present when using the XLR output.

Attack – Controls compression response - counter clockwise for fast attack, clockwise for

slower attack.

Volume – Adjusts the output level of the Compressor circuit, full clockwise is maximum

volume.

Tone – Add more presence to your tone by dialing this in clockwise for added brightness.

Blend – Control the strength of the effect coming through. All the way counterclockwise the

signal is 100% dry but will slowly increase to 100% wet as the controller is rotated clockwise.

Sustaaiin – Dial in clockwise to add more sustain to your guitar tone to alter how long a note

rings on.

Boost - Controls level of boost when footswitch is engaged, rotating clockwise increases

gain.

Boost Mode Switch - Select either a at frequency or a rich, saturated mid boost.

XLR - Connect direct to mixing desk / PA / audio interface with a separate XLR cable.

Ground Lift - Engage this to lift the ground if connecting the XLR adds noise.

Comp On - Engage this to permanently enable the compressor circuit (bypass becomes

inactive).

Power: This pedal was designed around the usage of a 9V DC power source only. To

avoid damage to the pedal, , do not use center pin positive do not exceed 9V DC

adapters, and do not use AC power. Use only a 9V DC power source that is intended for

guitar pedals. This pedal draws approximately 30mA at 9V.

Lead T

Lead Tone

one

oneLead Tone

If you are looking to go a bit further with

your lead tones, maybe even into a slightly

dirtier amplier, this is a great starting

point. Dial that Sustain in a bit higher and

dial back the Blend and Attack a little until

you nd that super responsive lead tone.

Use the boost set in Mid mode to add

extra bite.

Just hit the T

Just hit the Tape!

ape!

ape!Just hit the Tape!

This is Cory’s secret weapon for laying

down the ultimate grooves in a studio. Dial

this in for that absolute killer tone that’s as

at home going through your amplier as

it is direct into your DAW or a recording

desk.

The Cory Wong Signatur

The Cory Wong Signature T

e T

e Tone

one

oneThe Cory Wong Signature Tone

You know what this is, this is why you are

here after all! This is signature clean, that

powerful, and rich tone that Cory Wong

is synonymous with. Get your strumming

hand warmed up because you are going

to be hitting the dirtiest of chops and the

funkiest of rhythms with this one. Boost is

set to Flat mode for boosting solos without

altering tonality.

Cory Wong’

Cory Wong’s Signature Settings

s Signature Settings

s Signature Settings Cory Wong’s Signature Settings

Produkt Specifikationer

Mærke:	Wampler
Kategori:	Ikke kategoriseret
Model:	Cory Wong

Har du brug for hjælp?

Hvis du har brug for hjælp til Wampler Cory Wong stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Wampler Manualer

Wampler Manual

29 August 2024

Wampler Cory Wong Manual

23 August 2024

Wampler Metaverse Manual

23 August 2024

Wampler Pantheon Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1048C Manual

16 Juni 2025

Playtive IAN 91495 Manual

16 Juni 2025

Playtive IAN 270612 Manual

16 Juni 2025

Playtive IAN 315026 Manual

16 Juni 2025

Playtive IAN 115585 Manual

16 Juni 2025

Playtive 10464 Manual

16 Juni 2025

Playtive HG03821 Manual

16 Juni 2025

Martin VC-Strip Manual

16 Juni 2025

Playtive HG06316 Manual

16 Juni 2025

Playtive HG05102 Manual

16 Juni 2025