Whale Gusher 10 Mk3 Manual

Whale Ikke kategoriseret Gusher 10 Mk3

Læs gratis den danske manual til Whale Gusher 10 Mk3 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Whale Gusher 10 Mk3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Thank you for purchasing this Whale® product.

For over 60 years Whale® has led the way in the design and manufacturer of water and waste systems

including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have

built a reputation for quality, reliability and innovation backed up by excellent customer service.

For information on our full product range visit: www.whalepumps.com

CONTENTS

1. Principles of Operation

2. Specification

3. Application

4. Warnings

5. Parts List

6. Optional Extras

7. Installation

8. Maintenance

9. Trouble Shooting

10. Winterising

11. Service Support Details

12. EU Declaration of Conformity

13. Patents and Trademarks

14. Warranty

LIST OF IMAGES

Fig. 1 Through deck installation

Fig. 2 Incorrect installation

Fig. 3 Typical installation diagram

Fig. 4 Mounting arrangements for a standard model

Fig. 5 Dimensions

Fig. 6 Discharge point is well above the water line

Fig. 7 Deck fitting for Gusher Pumps (Half sectional elevation of deck fitting, pump and bracket)

Fig. 8 Exploded diagram

Read the following carefully before installation

To the Fitter:

Check that the product is suitable for the intended application. Follow these installation instructions and ensure all

relevant personnel read the points listed below. Also ensure that these operating instructions are passed on to the

end user. The manufacturer cannot be held responsible for claims arising from incorrect installation, unauthorised

modification or misuse of the product.

To the User:

Read the following instructions carefully.

Whale Gusher®10 Mk3 Pump BP3708 / BP3740

INSTALLATION & USER INSTRUCTIONS

This bilge pump is designed to exhaust standing water only. Manufactured from durable diecast alloy to withstand

tough marine conditions.

This bilge pump is suitable as a primary bilge pump on boats equal to or greater than 12m (40ft). Output capacity

depends on installation, conditions during use and pumping rate. Users should be aware that capacity may not be

sufficient to cope with rapid influx of water. If it is intended for any other purpose or with any other liquid, it is the

users responsibility to ensure that the pump is suitable for the intended use and, in particular, that the materials are

fully compatible with the liquids to be used.

• The pump is designed to evacuate standing bilge water only. Bilge pump capacities may not be sufficient to

prevent flooding from rapid accumulation of water due to storms, rough weather and/ or rapid leaks created

by hull damage and or unsafe navigational conditions.

• Fitting an inlet strainer will ensure the maximum efficiency of the pump.

• This pump is not for use in systems evacuating water through a skin fitting or seacock below the waterline.

All pipework must contain a corectly installed anti-syphon valve/loop (next page see Fig 3 - Typical

installation diagram).

•Not suitable for pumping flammable liquids, diesel, chemicals etc. Suitable for bilge water only.

• With all applications, it is important that a system of safe working practice is applied to installation, use and

maintenance. Ensure the waste water system is drained before installation. In order to securely fasten the

unit, ensure that the mounting surface is a minimum thickness of 18mm (45/64") as shown in Fig. 4

•NOTE Do not screw directly to the hull - must be mounted on a bulkhead or on an additional board.

1. PRINCIPLES OF OPERATION

4. WARNINGS

2. SPECIFICATION

Model On Deck / Bulkhead Thru Deck / Bulkhead

(includes deck plate)

Product Code BP3708 BP3740

Hose Connections 38 mm (1 1/2”) Smooth Hose Connections

Weight 2.3 kg (5 lbs)

Materials

Pump Body: Marine Grade LM6 Aluminium Alloy (epoxy coated).

Diaphragm: Neoprene (Nitrile®option available)

Fasteners: Stainless Steel

Materials In Contact With Fluid Marine Grade LM6 Aluminium Alloy (epoxy coated).

Neoprene, Nitrile®, Stainless Steel

Service Kit

AK3706 - Neoprene Parts

AK3714 - Nitrile® Parts for Oil & Diesel

Contains: Diaphragms, Valves, Gasket

Maximum Suction Lift 4 m (13.5ft)

Maximum Discharge Head 4 m (13.5ft)

3. APPLICATION

Performance Data BP3708 / BP3740 BP3708 / BP3740

Suction Lift 1 m (3 ft) 2 m (6 ft)

Discharge Head 0.5 m (1.5 ft) 0.5 m (1.5 ft)

45 Strokes per Minute 41 ltrs (11 US gals) 41 ltrs (11 US gals)

70 Strokes per Minute 65 ltrs (17 US gals) 65 ltrs (17 US gals)

Produkt Specifikationer

Mærke:	Whale
Kategori:	Ikke kategoriseret
Model:	Gusher 10 Mk3

Har du brug for hjælp?

Hvis du har brug for hjælp til Whale Gusher 10 Mk3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Whale Manualer

Whale Gusher 30 Manual

5 September 2024

Whale UF2214 Manual

5 September 2024

Whale Gusher 10 Mk3 Manual

5 September 2024

Whale InstantMatch Premium SDP303T Manual

5 September 2024

Whale Switch Connect BP1578 Manual

5 September 2024

Whale Instant Match SDP134Tn Manual

20 Juli 2024

Whale Orca 3000 Manual

19 Juli 2024

Whale Smartbail Manual

7 Juli 2024

Whale Gulper 320 Manual

7 Juli 2024

Whale Supersub Manual

7 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rival CN753-W Manual

15 Juni 2025

Acopa 553WSMKE Manual

15 Juni 2025

Atosa RDCS-35 Manual

15 Juni 2025

Gourmia GAF692 Manual

15 Juni 2025

Taylor 5315856 Manual

15 Juni 2025

Watts LF8B Manual

15 Juni 2025

Watts PLT-5 Manual

15 Juni 2025

ToiToiKids Fay Manual

15 Juni 2025

Astell&Kern PD10 Manual

15 Juni 2025

Aiphone JP-8Z Manual

15 Juni 2025