Whirlwind DIRECT2 Manual

Whirlwind Ikke kategoriseret DIRECT2

Læs gratis den danske manual til Whirlwind DIRECT2 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Whirlwind DIRECT2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

WHIRLWIND DIRECT2

IN (1/4” jack X 2)

For input of the signals from the sources. The sources may be the outputs of any type of

musical instrument or amplifier speaker output. (WARNING! When connecting to speaker outputs, the Direct2

does not supply the proper amplifier load required by most tube type amplifiers. Do not use a tube amplifier’s speaker

output alone with the Direct2. You must also have a speaker or appropriate dummy load connected to avoid possible

damage to the amplifier.

OUT (1/4” jack X 2)

A “Y” connection or “loop through” from the input.

OUTPUT 1, OUTPUT 2 (XLR jacks)

Male XLRs, which provide balanced low impedance (150 Ohms) signals suitable for

connection to balanced, low-Z equipment (mixing console, workstation, etc.)

PAD (Switch X 2)

Most instruments will operate properly when set to the OUT position. Set to the IN position

(applies an extra 20dB of attenuation) for use with very “hot” instrument signals or when

connecting the Direct2 to the speaker output of an amplier.

GND/LIFT (Switch X 2)

Disconnects the ground between each input and the corresponding XLR output when set to

the LIFT position to help eliminate hum. Ground remains connected when set to the GND

position.

This product is warranted to be free of defects in materials or workmanship to the original

purchaser for a period of 3 years from the date of purchase. Should warranty service be

required, return the unit postage paid along with the original sales receipt to:

Whirlwind Music Dist., Inc.

99 Ling Road

Rochester NY 14612

Whirlwind will, at its option, repair or replace the unit. This warranty does not cover damage

resulting from abuse, unauthorized modifications or use of the product in unintended

applications.

Produkt Specifikationer

Mærke:	Whirlwind
Kategori:	Ikke kategoriseret
Model:	DIRECT2

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlwind DIRECT2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Whirlwind Manualer

Whirlwind WFF8X2.5 Manual

8 Oktober 2025

Whirlwind PL-PM1RJK1 Manual

8 Oktober 2025

Whirlwind WFSD12X2.5KIT Manual

8 Oktober 2025

Whirlwind PL-PM1RJK2 Manual

7 Oktober 2025

Whirlwind HATTXL Manual

29 September 2025

Whirlwind HAUC Manual

29 September 2025

Whirlwind HATT-AES Manual

29 September 2025

Whirlwind SPLIT 6 Manual

29 September 2025

Whirlwind HATT4 Manual

29 September 2025

Whirlwind HAUCXL Manual

28 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MuxLab 500439 Manual

5 November 2025

GVM BL160-II Manual

5 November 2025

Uniprodo UNI_ROLL_03 2in1 Manual

5 November 2025

Rockville SS6 Manual

5 November 2025

Silk'n VacuPedi FTC04 Manual

5 November 2025

MEPROLIGHT MCO PRO Manual

5 November 2025

XPG Battlecruiser II Manual

5 November 2025

Hosa USQ-110 Manual

5 November 2025

JMAZ Centipede Quadro Manual

5 November 2025

Lake People Mic-Amp F311-D Manual

5 November 2025