Wire Technologies 100GBASE-CWDM-WR Manual

Wire Technologies Ikke kategoriseret 100GBASE-CWDM-WR

Læs gratis den danske manual til Wire Technologies 100GBASE-CWDM-WR (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Wire Technologies 100GBASE-CWDM-WR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

10 1310 2km0GBASE-CWDM4 nm

100GBASE-CWD Specifications M4

Form Factor: QSFP28

Data Rate: 0G10

Tx/Rx Wavelength: 1310nm

Compatible with: See Table

Reach: 2km

Cable Type: SMF

DDM/DOM: Yes

Connector Type: Duplex-LC

Power Supply: 3.3V

Temperature Range: 0-70°C

Warranty: Lifetime - See Warranty Document

100GBASE-CWDM Features 4

• Hot pluggable QSFP28 footprint

• Supports 97.89 to 104.7 Gb/s bit rates

• RoHs-6 compliant

• Built-in digital diagnostic function

• Compliant with OEM vendor multi-source agreement

Testi ng

Compatibility Tested: Each transceiver is tested in an origi-

nal host switch for recognition (Loop back test)

Performance Tested: Tested over an optical connection of

the intended distance. Recreated in the lab using a bit fib re

spool method

100% Testing of all Transceiver s: No Batch Testing (1-10%)

Popular Compatibility Options

Vendor Part Code

Wire 100GBASE-CWDM4- WR

Cisco Q - 0G-CWDM4-S SFP 10

Juniper QSFP-100G-CWDM4

Arista QSFP-100G-CWDM4

Mellanox A1L30- MM CM

Dell QSFP-100G-CWDM4

Brocade 100G-QSFP28-PIR4-500

Extreme 100G-CWDM4-2KM

Huawei 02311MNN

Avago QSFP -IR4-100G 28

Allied Telesis QSFP28-IR4

D-Link DEM-Q28X0 -IR4 2Q

75+ other vendors available

Description

This 100G-CWDM4 compatible QSFP28 transceiver provides 100G throughput up to 2km over Single-Mode Fibre

(SMF) using a wavelength of 1310nm via an -Duplex Connector. It is guaranteed to be 100% compatible with the LC

host OEM switch, router or network interface card (NIC). This easy to install, hot swappable transceiver has been pro-

grammed, uniquely serialized and application tested to ensure that it will initialize and perform identically to the OEM

Transceiver. Digital Optical Monitoring (DOM) support is also present to allow access to real-time operating parame-

ters. We stand behind the quality of our products and proudly offer a lifetime warranty.

Produkt Specifikationer

Mærke:	Wire Technologies
Kategori:	Ikke kategoriseret
Model:	100GBASE-CWDM-WR
Produktfarve:	Sølv
Strømforbrug (typisk):	3.5 W
Driftstemperatur (T-T):	0 - 70 °C
Certificering:	CE, FCC, REACH
Netværksstandarder:	IEEE 802.3ba, IEEE 802.3bm
Bæredygtighedscertifikater:	RoHS
Maksimal dataoverførselshastighed:	103125 Mbit/s
Oprindelsesland:	Kina
SFP modtagertype:	Fiberoptisk
Grænsefladetype:	QSFP28
Fiber optisk strømstik:	LC
Enkelttilstand fiber (SMF) understøttet:	Ja
Multitilstand fiber (MMF) understøttet:	Ingen
Maksimal overførselsafstand:	2000 m
Bølgelængde:	1310 nm
Mærke kompatibilitet:	MSA Compliant
Gennemsnitstid mellem fejl (MTBF):	1000000 t
Fiber ethernet kabelteknologi:	100GBASE
Minimal driftstemperatur:	0 °C
Maksimal driftstemperatur:	70 °C
SFP transceiver standard:	CWDM
Tx effekt (min.):	-6.5 dBmW
Tx effekt (maks.):	2.5 dBmW
Duplex system:	Fuld
Digital diagnose overvågning (DDM):	Ja