Yamaha LP-3 Manual

Yamaha Ikke kategoriseret LP-3

Læs gratis den danske manual til Yamaha LP-3 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Yamaha LP-3, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
4Attach the braces.
1 Attach the braces to the center of the upper beam using
the short screws (B). Do not tighten the screws yet.
2 Attach the stays to the side panels using the remaining
long screws (A). Again, do not tighten the screws yet.
3 Tighten the screws when all four are in place.
5Set the attachments.
Note: Fix them using small screws (C).
1 After making sure that the keyboard and the stand are
both facing in the same direction, place the keyboard on
the stand so that the holes of the stand are aligned with
the holes in the bottom of the keyboard.
Note: Be careful not to let your finger get caught between the
stand and the keyboard.
2Secure the keyboard using the knob bolts (E).
Note: Do not tighten the bolts until all four bolts are in place.
M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
©1994, 2003 Yamaha Corporation
LP-3 Assembly Instructions
Correct
tightenning
1Secure the upper beam
with long screws (A).
2Attach the caps (D).
Upper beam
Right
side
panel
Left
side
panel
Braces 2 pcs.
(identical)
Correct
tightenning
Insufficient
tightenning
(A) (A)
(B)
Insufficient
tightenning
Do not hold the LP-3 in the
shaded areas, to avoid
getting your fingers
caught.
Hand
Danger
Bottom of the
keyboard
Hand
HandHand
Danger
Slide the keyboard from
rear to front as your place
it on the stand to align
the bolt holes.
Small screws
(C)
Attach-
ments
CAUTION
• Be careful not to confuse parts, and be sure to install all parts
in the correct direction. Please assemble in accordance with
the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use
of incorrect screws can cause damage.
• Be sure to tighten up all screws upon completing assembly of
each unit.
• To disassemble, reverse the assembly sequence given below.
• If the main unit creaks or is otherwise unsteady when you play
on the keyboard, refer to the assembly diagrams and retighten
all screws.
Assembly procedure
1 You will need a Phillips screwdriver to assemble the
stand.
2Open the box and remove all parts. Make sure that all
of the parts are included.
Screw set (VS64540)
(A) Long screws
(6 x 30 mm)
(D) Caps(B) Short screws
(6
x 16 mm)
(C) Small screws
(4 x 8 mm)
(E) Knob bolts
(6 x 40 mm)
6 pcs. 2 pcs. 4 pcs. 4 pcs. 4 pcs.
Attachments
4 pcs.
3Attach the upper beam and cap (D).
Notes: Tighten four long screws (A) loosely at first, then do
them hardly to set each screw in place correctly.
When inserting the screws, turn them in loosely at
first, then tighten them after making sure the upper
beam is positioned correctly.

Produkt Specifikationer

Mærke: Yamaha
Kategori: Ikke kategoriseret
Model: LP-3

Har du brug for hjælp?

Hvis du har brug for hjælp til Yamaha LP-3 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Yamaha Manualer

Yamaha

Yamaha PLG150-DX Manual

26 November 2025
Yamaha

Yamaha LP-3 Manual

25 November 2025
Yamaha

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025
Yamaha

Yamaha BRK-TV2 Manual

2 September 2025
Yamaha

Yamaha TSX-132 Manual

18 August 2025
Yamaha

Yamaha KX8 Manual

16 August 2025
Yamaha

Yamaha KX61 Manual

16 August 2025
Yamaha

Yamaha KX25 Manual

15 August 2025
Yamaha

Yamaha WaveRunner JetBlaster (2024) Manual

10 August 2025
Yamaha

Yamaha WaveRunner FX Cruiser HO (2024) Manual

10 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

BIOThermare

BIOThermare Seagrass Gel Pads Manual

26 November 2025
Holzmann

Holzmann LSR 15HQ Manual

26 November 2025
Icon

Icon InSpire 8 G2 Manual

26 November 2025
Microchip

Microchip M2GL010 Manual

26 November 2025
Microchip

Microchip MPF300TL Manual

26 November 2025
Topping

Topping E50 Manual

26 November 2025
Atoll

Atoll PR 200 Sig Manual

26 November 2025
MDT

MDT SCN-SAFE.01 Manual

26 November 2025
Creality

Creality K2 Manual

26 November 2025
Matrox

Matrox Vion NXY Manual

26 November 2025