A-NeuVideo ANI-0108POE-AU Manual

A-NeuVideo Modtager ANI-0108POE-AU

Læs gratis den danske manual til A-NeuVideo ANI-0108POE-AU (16 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om A-NeuVideo ANI-0108POE-AU, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
ANI-0108POE-AU
1x8 HDMI 18Gbps Splitter over CAT6 196ft/60M
A-NeuVideo.com
Frisco, Texas 75036
INSTRUCTION MANUAL
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the box:
• ANI-0108POE-AU 1x8 18Gbps HDMI Splitter
• (8) CAT Receivers
• IR Blaster Cable (5 ft / 1.5M)
• USB -to- USB Micro-B cable
• (8) 20K~60KHz IR Receiver Cable (5 ft / 1.5M)
• 12V/2.5A DC Locking Power Adapter
SAFETY INFORMATION
1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment.
Retain all documentation for future reference.
2. Follow all instructions printed on unit chassis for proper operation.
3. To reduce the risk of re, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid.
4. Make sure power outlets conform to the power requirements listed on the back of the unit. Keep unit protected from rain, water and
excessive moisture.
5. Do not attempt to clean the unit with chemical solvents or aerosol cleaners, as this may damage the unit. Dust with a clean dry cloth.
6. Do not use the unit if the electrical power cord is frayed or broken. The power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience
receptacles, and the point where they exit from the appliance.
7. Do not force switched or external connections in any way. They should all connect easily, without needing to be forced.
8. Always operate the unit with the AC ground wire connected to the electrical system ground. Precautions should be taken so that the
means of grounding of a piece of equipment is not defeated.
9. AC voltage must be correct and the same as that printed on the rear of the unit. Damage caused by connection to improper AC
voltage is not covered by any warranty.
10. Turn power o󰀨 and disconnect unit from AC current before making connections.
11. Never hold a power switch in the “ON” position.
12. This unit should be installed in a cool dry place, away from sources of excessive heat, vibration, dust, moisture and cold. Do not use
the unit near stoves, heat registers, radiators, or other heat producing devices.
13. Do not block fan intake or exhaust ports. Do not operate equipment on a surface or in an environment which may impede the normal
ow of air around the unit, such as a bed, rug, carpet, or completely enclosed rack. If the unit is used in an extremely dusty or smoky
environment, the unit should be periodically “blown free” of foreign dust and matter.
14. To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. Refer all servicing to
qualied service personnel. There are no user serviceable parts inside.
15. When moving the unit, disconnect input ports rst, then remove the power cable; nally, disconnect the interconnecting cables to
other devices.
16. Do not drive the inputs with a signal level greater than that required to drive equipment to full output.
17. The equipment power cord should be unplugged from the outlet when left unused for a long period of time.
18. Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship the unit,
use only the original factory packing.
19. Service Information Equipment should be serviced by qualied service personnel when:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the equipment.
C. The equipment has been exposed to rain.
D. The equipment does not appear to operate normally, or exhibits a marked change in performance.
E. The equipment has been dropped, or the enclosure damaged.
THIS SAFETY INFORMATION IS OF A GENERAL NATURE AND MAY BE SUPERSEDED BY INSTRUCTIONS CONTAINED WITHIN THIS MANUAL.

Produkt Specifikationer

Mærke: A-NeuVideo
Kategori: Modtager
Model: ANI-0108POE-AU

Har du brug for hjælp?

Hvis du har brug for hjælp til A-NeuVideo ANI-0108POE-AU stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager A-NeuVideo Manualer

A-NeuVideo

A-NeuVideo ANI-0108POE-AU Manual

10 December 2024
A-NeuVideo

A-NeuVideo ANI-0104POE-XT Manual

6 September 2024
A-NeuVideo

A-NeuVideo ANI-0108POE-XT Manual

3 September 2024
A-NeuVideo

A-NeuVideo ANI-0102POE-XT Manual

26 August 2024

Modtager Manualer

Nyeste Modtager Manualer

MB Quart

MB Quart NA2-320.4 Manual

17 Juni 2025
Planet Audio

Planet Audio PSX36 Manual

17 Juni 2025
Planet Audio

Planet Audio PL2500.1M Manual

17 Juni 2025
MB Quart

MB Quart NA2-400.2RC Manual

17 Juni 2025
MB Quart

MB Quart NA2-400.1 Manual

17 Juni 2025
DS18

DS18 GEN-X G8400.4D Manual

17 Juni 2025
Hifonics

Hifonics Zeus Expansion ZXR750/1E Manual

17 Juni 2025
Futaba

Futaba R7206 SB Manual

16 Juni 2025
DS18

DS18 FRP-3.5K Manual

16 Juni 2025
DS18

DS18 SMD-300.4AB Manual

16 Juni 2025