Accell UltraAV K078C-007B Manual

Accell Modtager UltraAV K078C-007B

Læs gratis den danske manual til Accell UltraAV K078C-007B (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Accell UltraAV K078C-007B, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Model Numbers:
K078C-006B (1x4)
K078C-007B (1x8)
UltraAV®
HDMI Splitter and Distribution
Amplifier
READ ME FIRST – SETUP INSTRUCTIONS
Thank you for purchasing the Accell UltraAV HDMI
Distribution Amplifi er. This product is designed to provide
an exceptional performance and lue. Please review the va
manual before operating and retain for future reference.
- CAUTION -
1. Ensure the unit has suffi cient
ventilation. Do not cover
ventilation openings. Do not install
in a confi ned space.
2. Do not operate near source
of heat. Do not stack on to p,
underneath or between other heat
generating unit/s including other
amplifi ers.
3. Unplug power adapter if not
used for an extended period.
4. prevent damage from power To
surges, the unit should be plugged
into a surge protector or surge pro-
tected power source.
5. Do not use near liquid or areas
of heavy moisture.
6. Clean unit with a clean and dry
cloth only.
7. This unit cannot be serviced in
the fi eld. Contact Accell if service is
required.
8. Do not open case, risk of shock -
shock hazard.
9. Do not modify power cord or use
the product if the power cord is
damaged.
Introduction
The UltraAV HDMI Distribution Amplifier (Splitter) accepts a signal from
a single HDMI enabled audio/video source and splits the single input
into 4 (1x4 Splitter) or into 8 (1x8 Splitter) HDMI outputs. The audio/
video signal is mirrored on up to 4 (1x4 Splitter) or 8 (1x8 Splitter) HDMI
displays, monitors, projectors or TV’s.
Over-Current and Over-Voltage Protection
The circuit boards are equipped with both oltage over-current and over-v
protection and will automatically power down if encountered. The circuit
boards will restore automatically once the ex ltage cessive current or vo
has passed.
Package Contents
● HDMI Distribution Amplifier (Splitter) ● Power Adapter
● Owner’s Manual
specifications continued...
● Operating temperature range: 5 to 131°F (-15 to 55°C)
● Operating humidity range: 5% to 90% RH (no condensation)
1x8 HDMI Distribution Amplifier (Splitter)
Model: K078C-007B
Specifi cations
● Connect 1 HDMI Source to up to 8 HDMI Displays
● Supports HD resolutions up to 1080P and 3D
● HDMI 1.4a, HDCP 1.2 compliant
● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)
● Data transfer speed of 6.75Gbps (225MHz)
● Audio formats supported: DTS-HD 7.1, Dolby True-HD 7.1
● Deep color up to 36-bit
● Maximum input cable length: Up to 20m (24AWG)
● Maximum output cable length: Up to 20m (24AWG)
● Supports cascade up to 6 units (Silicon Image chipset)
● Rack shelf or surface mountable
● 5V DC, UL Listed power adapter
● Input AC: 50Hz to 60Hz, 100-240V
● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D
(277W x 28H x 156D mm)
● Operating temperature range: 5 to 131°F (-15 to 55°C)
● Operating humidity range: 5% to 90% RH (no condensation)
1x4 HDMI Distribution Amplifier (Splitter)
Model: K078C-006B
Specifi cations
● Connect 1 HDMI Source to up to 4 HDMI Displays
● Supports HD resolutions up to 1080P and 3D
● HDMI 1.4a, HDCP 1.2 compliant
● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)
● Data transfer speed of 6.75Gbps (225MHz)
● Audio formats supported: DTS-HD 7.1, Dolby True-HD 7.1
● Deep color up to 36-bit
● Maximum input cable length: Up to 20m (24AWG)
● Maximum output cable length: Up to 20m (24AWG)
● Supports cascade up to 3 units
● Shelf or surface mountable
● 5V DC, UL Listed power adapter
● Input AC: 50Hz to 60Hz, 100-240V
● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D
277W x 28H x 156D mm
Cascading
The HDMI splitter can be cascaded (l ered) to expand the number of ay
supported displays.
K078C-006B (1x4 Splitter) - Supports up to 3 layers.
K078C-007B (1x8 Splitter) - Features a Silicon Image chipset supporting
up to 6 layers.
To create a 2 layer cascade, two same distribution amplifiers must be
used. Run an HDMI cable from an output on unit #1 to the input of unit
#2. A 2 layer cascade of the 1x4 splitter will support up to 7 outputs. A 2
layer 1x8 splitter cascade will support up to 15 outputs.
Setup
With the splitter power switch in the OFF position, connect an HDMI High
Speed cable from the HDMI Output on the audio/video source to the
HDMI Input 1 on the back of the splitte r.
Tips: Use the shortest length HDMI cables possible in each point
in the installation. Use only High Quality and High Speed HDMI
cables.
Next, connect an HDMI cable to the HDMI Output Port 1 on the splitter
and then connect the other end to an HDMI Input Port on the displ ay
device. Similarly, using HDMI cables, connect the remaining HDMI Output
Ports on the rear of the splitter to the HDMI Input ports of the other
displays.
Connect the power adapter to the splitte Plug the power adapter into a r.
surge protected AC power outlet. Turn ON the video source, and turn ON
the displays. Turn the splitter’s power switch to the ON position.
Infrared Control (IR)
The area on the front panel labeled is the IR IR or IR Extender
Transmitter (IR-TX) port.
Using the Ultra-IR Adapter Kit (optional) enables the control of the source
device from the location of the display. Plug the HDMI cable into the IR
Adapter at the displ end. Next plug the IR Adapter HDMI connector ay ’s
into the display. The IR Adapter has a port that accepts an optional IR
Receiver (I RX). When the IR-RX receives an IR signal from the source R-
devices remote control, it uses the HDMI cable’s CEC line to send the
signal to the splitte Plug the optional IRr. -TX into the IR port on the front
panel of the splitte int the end of the IRr. Po -TX at the source device.
The signal is transmitted through the IR-TX sending the IR signal to the
source device.
Note: As the Ultra IR-Adapter uses the CEC channel of the HDMI cable,
the CEC function cannot be used when using this device. rn off CEC or Tu
HDMI Link functionality in the source devices and displays.
The illust tion below shows the optional Ultra-IR Adapter Kit controlling ra
the source device on a 1x4 splitte The 1x8 splitter is setup in a similiar r.
manner. Note: Due to specific pin requirements, only use Accell Ultra-IR
transmitters or receivers.
Ultra-IR Adapter Kit: PN: B164B-001B
Includes IR-Adapter: 1 pc.
IR ansmitter (5 ft.): 1 pc.Tr
Dual Frequency: 38KHZ-60KHZ
IR Receiver (5 ft.): 1 pc.
Ultra-IR ceiver andRe
Transmitter Pin assignment
Ultra-IR ansmitter (5 ft.)Tr
Dual Frequency: 38KHZ-60KHZ
PN: B164B-003B
Troubleshooting
Q. One of the display does not show a picture or output audio.
A. Check the displays input setting to ensure it is set to recei a signal ve
from the connected HDMI port.
Q. One or more of the connected displays will not display a picture while
one or more of the displa ys do display a picture:
A1. Press the button on the front of the splitter to reset it. RESET
Alternatively turn off the power to the splitte source and displays. it r, Wa
60 seconds. Turn the source on. Turn the displays on.Turn the splitter on.
A2. The HDMI cables on the non-functonal display/s cannot support
their long length. Use only high-quality High Speed HDMI cables. Keep
the cable length as short as possible. Test by locating the non-working
display close to the splitter. Use a short HDMI cable to connect the
splitter to the TV. A working TV using a short HDMI cable indicates an
issue with the HDMI cable.
Q. Get the message “This protocol is not supported” or other error
message.
A. See answer A1 abo .ve and repeat the steps outlined
Q. The splitter is not down sampling the video and some of the TV are ’s
not displaying a picture.
Ultra-IR ceiver (5 ft.)Re
Dual Frequency: 38KHZ-60KHZ
PN: B164B-002B
troubleshooting continued...
A1. Go into the TV’s setup and configure the resolution to match all the
connected TV’s. The TV’s should share the same resolution.
A2. In the source devices menu options set the source device to output a
resolution that matches all the connected displays.
Q. My TV resolution are not optimized.’s
A. The splitter will query the displays and provide the highest common
video resolution amongst them. Example: Using a 1080p source, if 3
of the displays support a maximum resolution of 1080p and 1 displ ay
supports a maximim resolution of 720p ate at a , all 4 display will oper
resolution of 720p. If the 720p TV in the example is then turned of the f,
other 3 displays can then operate in 1080p resolution. Press the RESET
button on the front panel of the splitter to refresh the configuration. The
three 1080p TV’s will refresh (flicker) then each will displ a 1080p ay
resolution picture.
ASSISTANCE: Questions regarding this product or its product
warranty, please check out our b site at: www.accellcables.com. We
Customer service can be reached by email at support@accellcables.com
or phone at 510-438-9288, toll free 877-353-0772 (M-F 9am-5pm PST).
1-YEAR MANUFACTURERS WARRANTY
The Accell UltraAV Splitter is warranted for one year from date
of purchase to be free of defects in material and workmanship.
In the event of such defects, the Accell product will be repaired
without charge or replaced with a new one at our option, if
delivered to Accell Corporation prepaid, together with a copy
of the sales receipt indicating the proof of purchase date and
place of purchase. This warranty excludes defects due to normal
wear, abuse, shipping damage, or failure to use the product in
accordance with the instructions. ACCELL CORPORATION SHALL
NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE,
LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED
OPERATION OR COMMERCIAL LOSS, OR ANY OTHER DAMAGES,
WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. YOU
AGREE THAT ACCELL’S MAXIMUM LIABILITY ARISING FROM
ANY PRODUCT SOLD BY ACCELL SHALL NOT EXCEED THE PRICE
OF SUCH PRODUCT. SOME JURISDICTIONS DO NOT ALLOW
THE LIMITATION OF EXCLUSION OF LIABILITY FOR CERTAIN
DAMAGES, SO THE ABOVE MAY NOT APPLY TO YOU TO THE
EXTENT SUCH JURISDICTION’S LAW IS APPLICABLE TO THIS
AGREEMENT. This warranty gives you specific legal rights, and
you may have other rights that vary from state to state.
LIMITATION OF LIABILITY
IN NO EVENT SHALL ACCELL CORPORATION, ITS SUBSIDIARIES
OR AFFILIATES, OR THEIR RESPECTIVE PARTNERS, OFFICERS,
DIRECTORS, EMPLOYEES, SHAREHOLDERS, REPRESENTATIVES
OR AGENTS (COLLECTIVELY, “ACCELL”) BE LIABLE FOR
DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
OR INDIRECT DAMAGES (INCLUDING BUT NOT LIMITED
TO, LOSS OF DATA, USE OR PROFITS), HOWEVER CAUSED,
WHETHER FOR BREACH OF CONTRACT, NEGLIGENCE, OR
OTHERWISE, AND WHETHER OR NOT ACCELL HAS BEEN
ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. YOU
AGREE THAT ACCELL’S MAXIMUM LIABILITY ARISING FROM
ANY PRODUCT SOLD BY ACCELL SHALL NOT EXCEED THE PRICE
OF SUCH PRODUCT. SOME JURISDICTIONS DO NOT ALLOW
THE LIMITATION OF EXCLUSION OF LIABILITY FOR CERTAIN
DAMAGES, SO THE ABOVE MAY NOT APPLY TO YOU TO THE
EXTENT SUCH JURISDICTION’S LAW IS APPLICABLE TO THIS
AGREEMENT.
WARRANTY RETURNS PROCEDURE
Contact Customer Support to obtain a Return Authorization
(RMA) number. RMA numbers are valid for 30 days from the date
of issuance. We are unable to accept returns without an RMA
number. Returns without an RMA number clearly printed on the
outside of the package will be refused and returned unopened. All
returns must be shipped prepaid at the expense of the shipper.
Accell assumes no responsibility for any inaccuracies and liability
for direct, indirect, special, incidental, or consequential damages
as a result. Due to ongoing improvements, Accell reserves
the right to make changes to hardware, packaging and any
accompanying documentation without prior written notice.
©2013 Accell Corporation, All Rights Reserved. Accell and UltraAV
are registered trademarks of Accell Corporation.

Produkt Specifikationer

Mærke: Accell
Kategori: Modtager
Model: UltraAV K078C-007B

Har du brug for hjælp?

Hvis du har brug for hjælp til Accell UltraAV K078C-007B stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Accell Manualer

Accell

Accell UltraAV K078C-006B Manual

10 August 2024
Accell

Accell UltraAV K072C-011B Manual

9 August 2024
Accell

Accell UltraAV K078C-007B Manual

9 August 2024
Accell

Accell UltraAV K072C-012B Manual

8 August 2024
Accell

Accell UltraAV K072C-013B Manual

6 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Ecler

Ecler AURA-2B900 Manual

15 Juni 2025
Planet Audio

Planet Audio PSX26 Manual

15 Juni 2025
Planet Audio

Planet Audio AC1200.2 Manual

15 Juni 2025
Planet Audio

Planet Audio AC2400.4 Manual

15 Juni 2025
Planet Audio

Planet Audio AC2600.2 Manual

15 Juni 2025
Planet Audio

Planet Audio PL1500.1M Manual

15 Juni 2025
Ecler

Ecler HSA2-400ES Manual

15 Juni 2025
Planet Audio

Planet Audio PL4000.1D Manual

15 Juni 2025
Planet Audio

Planet Audio MB1200.4D Manual

15 Juni 2025
Pure Acoustics

Pure Acoustics AZ-2U-3240 Manual

15 Juni 2025