Adder LPV150 Manual

Adder Skifte LPV150

Læs gratis den danske manual til Adder LPV150 (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Adder LPV150, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Your AdderLink LPV package

The AdderLink LPV allows you to extend analogue video over a maximum of 150 metres of

twisted pair cable with the minimum of infrastructure and fuss. It is simply powered via USB from

the transmitter end, so that no additional power supply is required at the receiver, hence the

name LPV or Line Powered Video.

In addition to this brief guide, your package should contain the following:

Supplied items

Adder Technology Limited,

Technology House,

Trafalgar Way,

Cambridge, CB23 8SQ,

United Kingdom

Tel: +44 (0)1954 780044

Fax: +44 (0)1954 780081

AdderLink LPV

User Guide

support@adder.com

www.adder.com

All trademarks are acknowledged.

Adder Corporation,

350R Merrimac Street,

Newburyport,

MA 01950,

United States of America

Tel: +1-888-932-3337

Fax: +1-888-275-1117

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and

materials for a period of two years from the date of original purchase. If the product should fail to

operate correctly in normal use during the warranty period, Adder will replace or repair it free of

charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s

control. Also, Adder will not be responsible for any loss, damage or injury arising directly or indi-

rectly from the use of this product. Adder’s total liability under the terms of this warranty shall in

all circumstances be limited to the replacement value of this product.

Regulatory information

European EMC directive 89/336/EEC

This equipment has been tested and found to comply with the limits for a class A

computing device in accordance with the speciﬁcations in the European standard

EN55022. These limits are designed to provide reasonable protection against harmful

interference. This equipment generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions may cause harmful interference to radio or

television reception. However, there is no guarantee that harmful interference will not occur in a

particular installation. If this equipment does cause interference to radio or television reception,

which can be determined by turning the equipment on and off, the user is encouraged to correct

the interference with one or more of the following measures: (a) Reorient or relocate the receiv-

ing antenna. (b) Increase the separation between the equipment and the receiver. (c) Connect

the equipment to an outlet on a circuit different from that to which the receiver is connected. (d)

Consult the supplier or an experienced radio/TV technician for help.

FCC compliance statement (United States)

This equipment generates, uses and can radiate radio frequency energy and if not installed

and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause

interference to radio communications. It has been tested and found to comply with the limits for

a Class A computing device in accordance with the speciﬁcations in Subpart J of part 15 of FCC

rules, which are designed to provide reasonable protection against such interference when the

equipment is operated in a commercial environment. Operation of this equipment in a residential

area may cause interference, in which case the user at his own expense will be required to take

whatever measures may be necessary to correct the interference. Changes or modiﬁcations not

expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Adder Asia Paciﬁc,

6 New Industrial Road,

Hoe Huat Industrial Building

#07-01,

Singapore 536199

Tel: +65 6288 5767

Fax: +65 6284 1150

What you may additionally need

PSU-LPV-KIT

External power

adapter and USB

adapter cable

This power kit is only required if the host

computer or other device with a USB

port cannot provide sufﬁcient power.

Safety information

• For use in dry, oil free indoor environments.

• Ensure that the twisted pair interconnect

cable is installed in compliance with all ap-

plicable wiring regulations.

• Do not connect the interconnect cable to

any other equipment, particularly network

or telecommunications equipment.

• Do not attempt to service the units yourself.

Local unit

Remote unit

ALPV150P package includes: 1 local unit and 1 remote unit

ALPV150T package includes: 1 local unit only

ALPV150R package includes: 1 remote unit only

Produkt Specifikationer

Mærke:	Adder
Kategori:	Skifte
Model:	LPV150
Type:	Sender
Driftstemperatur (T-T):	0 - 40 °C
Forbindelsesteknologi:	Ledningsført
Certificering:	CE, FCC
Maksimal overførselsafstand:	150 m
Maksimal digital opløsning:	1920 x 1080 pixel
Transmitter bredde:	45 mm
Transmitter dybde:	63 mm
Transmitter højde:	21 mm
Antal RJ-45 porte (sender):	1
Sender til video porttype:	VGA