Adj Jelly Par Profile Manual

Adj Effektmaskine Jelly Par Profile

Læs gratis den danske manual til Adj Jelly Par Profile (10 sider) i kategorien Effektmaskine. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Adj Jelly Par Profile, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User Instructions

Jelly Par Profile Introduction

Rev. 9/12

Unpacking: Thank you for purchasing the Jelly Par Prole by Ameri-

can DJ®. Every Jelly Par Prole has been thoroughly tested and has

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The American DJ® Jelly Par Profile is part of a continuing

pursuit to create high quality intelligent lighting. The Jelly Par Profile is a

DMX intelligent, high powered LED par fixture. This xture can be used

in a stand alone mode or connected in a Master/Slave conguration.

This wash has five operating modes: Sound Active mode, Auto mode,

RGB mode, Static Color mode, and DMX control mode. To optimize

the performance of this product, please read these operating instruc-

tions carefully to familiarize yourself with the basic operations of this

unit. These instructions contain important safety information regarding

the use and maintenance of this unit. Please keep this manual with the

unit, for future reference.

Customer Support: American DJ provides a customer support line, to

provide set up help and to answer any question should you encounter

problems during your set up or initial operation. You may also visit us

on the web at www.American DJ.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@AmericanDJ.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ.

PLEASE recycle the shipping carton when ever possible.

Jelly Par Profile Safety Precautions

• Mulit-Colors

• Five Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• Seven DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel

Mode, 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, and

7 Channel Mode.

• ADJ LED RC compatiable (Not Included)

• Power Cord Daisy Chain (See page 17)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 17 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Jelly Par Profile Warranty Registration

Jelly Par Profile Features

The Jelly Par Profile carries a 3 year limited warranty. Please fill out

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

The unit should be mounted using a mounting clamp (not provided),

afxing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Jelly Par Profile Installation

Produkt Specifikationer

Mærke:	Adj
Kategori:	Effektmaskine
Model:	Jelly Par Profile
Bredde:	220 mm
Dybde:	225 mm
Højde:	85 mm
Vægt:	1100 g
Produktfarve:	Hvid
Kontroltype:	Knapper
Lampe type:	LED
Indbygget skærm:	Ja
Skærmtype:	LED
Produkttype:	Disco spotlight
Strømforbrug (typisk):	14 W
Antal:	1
Strømkilde:	Vekselstrøm
Antal lamper:	108 Lampe( r)
Lysfarve:	Blue, Green, Red
Indgangsspænding:	90 - 240 V
Strålevinkel:	30 °
Pære levetid:	50000 t
Indgangsfrekvens:	50 - 60 Hz
Belysningstilstande:	Auto, DMX, Sound activated
Belysningskontrol protokoller:	DMX
Antal DMX kanaler:	7 kanaler
DMX udgang:	Ja
Bold diameter:	- "
XLR indgang:	Ja
Impulsfunktion:	Ja
DMX indgang:	Ja
Dæmpningsområde:	0 - 100 %
Flimmerfri drift:	Ja
Indbyggede makroer:	Ja