Advanced Network Devices IPBTN-DIS Manual

Advanced Network Devices Ikke kategoriseret IPBTN-DIS

Læs gratis den danske manual til Advanced Network Devices IPBTN-DIS (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Advanced Network Devices IPBTN-DIS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
Smart IP Button
(IPBTN-DIS) Installation
Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004
tech@anetd.com • 847-463-2237 • www.anetd.com/
1 v1.0
MOUNTING THE DEVICE
• Use device to mark installation location.
• Choose the best location and orientation to
make the push button easy to access by the user,
as well as to connect the network cable.
• Secure device using mounting hardware
appropriate for the installation surface.
• Drywall: #8-32 steel screw x 1-5/8" min. length
fastened to a 75 lbs. rated drywall anchor, or
similar
• Concrete: #8-32 steel screw x 5/8" min. length
fastened to a 8-32 concrete anchor with 9/16"
min. length, or similar
CONNECT TO THE NETWORK
• Connect a network cable (CAT5e or better) to the
RJ-45 port (PoE/PoE+).
• Connect the other end of the network cable to a
PoE (Power over Ethernet) network switch or
PoE injector on a network with a DHCP server.
ACCESS THE DEVICE
Use one of these ways to access the device:
• Enter the IP address assigned by the DHCP server
in your browser.
• Enter the
IPv6 link-local address in your browser,
formatted as
http://[fe80::2246:f9ff:feXX:XXXX] (XX:XXXX =
last 6 digits of MAC address).
• Double-click on the device in the IPClockWise
Endpoints list to open the web server interface.
•
For third-party software application, consult
guide for access method (often uses
configuration file).
CONFIGURATION OPTIONS
The device ships with default settings:
SIP Mode "Button"
Push-to-Talk 1 Trigger Only "Yes”
Activate GPIO 0 During Active Call “Yes”
Send Activations Only “Yes”
GPIO 0 Output Pulse Time “5000”
GPIO 0 Output Blink Period “500”
Indicate GPO “0”
Emergency Indication “SIP”
Indicate Trying Action “Clear”
Indicate Success Action “Blink”
Indicate Unready Action “Clear”
Indicate Ready Action “Set”
Indicate Failure Action “Clear”
Configuration File Setup
<SIPConfig
SIP_mode="button"
push_to_talk_ip1_trigger_mode="1"
gpio0_when_active_call="1" />
<GPIO
pulse_ms_output_gpio0="5000"
blink_ms_output_gpio0="500" />
<GPIO_callback
send_activations_only="1" />
<Indicate
indicate_gpo="0"
trying_action="clear"
success_action="blink"
unready_action="clear"
ready_action="set"
failure_action="clear" />
REGISTRE D SIP CALL

Produkt Specifikationer

Mærke: Advanced Network Devices
Kategori: Ikke kategoriseret
Model: IPBTN-DIS

Har du brug for hjælp?

Hvis du har brug for hjælp til Advanced Network Devices IPBTN-DIS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Advanced Network Devices Manualer

Advanced Network Devices

Advanced Network Devices IPSMOD Manual

28 September 2025
Advanced Network Devices

Advanced Network Devices IPBTN-DIS Manual

28 September 2025
Advanced Network Devices

Advanced Network Devices ZONE-LO Manual

17 Juli 2025
Advanced Network Devices

Advanced Network Devices IPSCM Manual

2 April 2025
Advanced Network Devices

Advanced Network Devices IPSCM-RMe Manual

28 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor

Vevor TLK2730OZ-2S Manual

22 November 2025
Vevor

Vevor 2024DB Manual

22 November 2025
Vevor

Vevor GCHM-40-90 Manual

22 November 2025
Vevor

Vevor PG-08240003 Manual

22 November 2025
BWT

BWT Aquabot Wave Manual

22 November 2025
Vevor

Vevor 1206-4301 Manual

22 November 2025
Vevor

Vevor HSTCBZH-01 Manual

22 November 2025
Vevor

Vevor DM-PK-8 Manual

22 November 2025
Vevor

Vevor B144-3 Manual

22 November 2025
Blizzard

Blizzard CueSlayer Manual

22 November 2025