Advanced Network Devices ZONE-LO Manual

Advanced Network Devices Ikke kategoriseret ZONE-LO

Læs gratis den danske manual til Advanced Network Devices ZONE-LO (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Advanced Network Devices ZONE-LO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Zone Line Out Controller

(ZONE- ) LO

Advanced Network Devices 3820 Ventura Drive Arlington Heights, IL 60004 •

Support: tech@anetd.com www.anetd.com/user-support/ - - •847 463 2237 •

1 v1.3

Figure 1

OVERVIEW

The ZONE-LO provides access to a line-

level audio output signal*. You can

access the signal via a front panel RCA

connector, typically used to connect to

analog amplifiers.

*10k Ohm, unbalanced, 2Vpp, Dynamic Range:

93dB. THD+N: 0.008%

INSTALLAT ION

The device can mount to a wall using the

four keyhole features located at the

corners of the device, with wall anchors

appropriate to the installation surface.

Power the device with PoE or PoE+,

connected via an Ethernet cable to the

PoE input. With power applied, the

green Power LED on the front panel will

illuminate.

SETUP AND USE

WARNING: Make sure to turn off

equipment when making connections,

and to set audio equipment volume to a

low value before powering on to avoid

any audio “pop” in the output.

The ANetD ZONE-LO works with a wide

variety of amplifiers. Please refer to the

technical documentation for your

speaker product when connecting to the

audio input.

Line Level Output

The RCA

connection

provides an

unbalanced

line-level

output,

typically used to connect analog to

amplifiers. This output activates

automatically any time the ZONE- LO

receives audio streams. More detailed

specifications include: 10k Ohm,

unbalanced, 2Vpp line-level output.

AMPLIFIER INTERFACE

Zone Line Out Controller

(ZONE- ) LO

Advanced Network Devices 3820 Ventura Drive Arlington Heights, IL 60004 •

Support: tech@anetd.com www.anetd.com/user-support/ - - •847 463 2237 •

2 v1.3

AND Zone Line Out Controllers work with

a wide variety of amplifiers. Please refer

to the technical documentation for your

specific product when connecting the

audio input.

Technical specifications for the audio

output from the Zone Line Out

Controller:

RCA Line Out

10k Ohm, unbalanced, 2Vpp line-level

output. Dynamic Range: 93dB. THD+N:

0.008%

CABLES AND ADAPTE RS

Unbalanced Amplifier Input

The ZONE- includes an RCA audio line-LO

level output port, enabling use of a

standard male- -male RCA cable for to

unbalanced amplifier inputs. You can

purchase this item off-the-shelf from a

variety of electronics stores.

Balanced Amplifier Input

If the amplifier only features balanced

inputs, then the recommended use of

XLR works as the most straightforward

method of adapting the unbalanced

audio output from the ZONE- . We LO

recommend a short RCA cable and a

longer XLR cable whenever possible due

to the enhanced noise rejection on the

XLR. These two tested RCA- -to XLR

adapter options proved to work.

1. Neutrik XLR adapter with audio

transformer:

Mouser Electronics Website

2. Neutrik XLR adapter without

transformer:

Mouser Electronics Website

Source:

http://en.wikipedia.org/wiki/XLR_connector

#Technical_usage_information

Produkt Specifikationer

Mærke:	Advanced Network Devices
Kategori:	Ikke kategoriseret
Model:	ZONE-LO

Har du brug for hjælp?

Hvis du har brug for hjælp til Advanced Network Devices ZONE-LO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Advanced Network Devices Manualer

Advanced Network Devices IPSMOD Manual

28 September 2025

Advanced Network Devices IPBTN-DIS Manual

28 September 2025

Advanced Network Devices ZONE-LO Manual

17 Juli 2025

Advanced Network Devices IPSCM Manual

2 April 2025

Advanced Network Devices IPSCM-RMe Manual

28 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ACTi VMGB-405 Manual

8 Oktober 2025

Zalman Acrux II ZM850-ARX2 Manual

8 Oktober 2025

Vestil SNM-90-FF-27 Manual

8 Oktober 2025

Whirlwind WFF8X2.5 Manual

8 Oktober 2025

Kensington K33603 Manual

8 Oktober 2025

Vestil EHLTT-4848-4-47 Manual

8 Oktober 2025

Joy-It SBC-XL6019 Manual

8 Oktober 2025

Klipsch Heritage Active Crossover Manual

8 Oktober 2025

Vestil ATP-C-2448 Manual

8 Oktober 2025

Axxess AXBUCH-TYCAM36V Manual

8 Oktober 2025