Advantech EKI-2701MPI-AE Manual

Advantech Splitter EKI-2701MPI-AE

Læs gratis den danske manual til Advantech EKI-2701MPI-AE (2 sider) i kategorien Splitter. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Advantech EKI-2701MPI-AE, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
1 Startup Manual
Overview
EKI-2701MPI is new generation which compliant
IEEE 802.3af/at/bt. The high-power PoE standard
boosts the power budget of each port to 60W or even
90W with PD device.
With the technology of PoE (Power over Ethernet),
devices are using a standard CAT5 cable. The
EKI-2701MPI BT PoE solution use the same cabling
standard with IEEE 802.3af/at. Which instead of
delivering power over to 4-pair twisted UTP with a
maximum of up to 90 watts of power over Ethernet
cable.
Packing List
Before installation, please make sure that you have
received the following:
1 x EKI-2701MPI or EKI-2701MPI- injector PS
1 x 130W 56V Power Supply (EKI-2701MPI- PS)
1 x Din-Rail, 1 x Wall-mount kit
If anything is missing or damaged, contact your
distributor or sales representative immediately.
Datasheet
For more detailed information, please refer to the full
manual which can be found on the Advantech’s
website.
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/products
For technical support and service:
http://www.advantech.com/support/
This startup manual is for EKI-2701MPI &
EKI-2701MPI-PS
1st Edition
Nov. 2018
Specications
General
Compatibility: IEEE 802.3, 802.3u, 802.3x,
802.3af/at/bt, 802.3ab
LAN: 10/100/1000Base-T (X)
Transmission Distance: Up to 100 m
Transmission Speed: Up to 1000Mbps
Connectors:
- 1 x RJ45 W/ Data- in
- 1 x RJ45 W/ PoE-out
LED Indicators: PoE, SYS
Power
:
:
:
::
- Power Consumption Max. 95 W (Full load PoE)
- Power Input 55~57 V
DC
(Single input)
- Power Output 90W
- Connectors 6P Pluggable Terminal Block,
DC Jack
Dimensions (W x H x D):
84 x 80 x 25mm (3.307" x 3.15" x 0.984")
Enclosure: IP40
Operating Temperature:
- EKI-2701MPI: - -75°C (-40~167°F) 40
- EKI-2701MPI-PS: 0 ~ 40°C (32 ~ 104°F)
Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)
Humidity: 10 ~ 95% (non-condensing)
EMC: CE, FCC
Warranty: 2 years
Overview

Produkt Specifikationer

Mærke: Advantech
Kategori: Splitter
Model: EKI-2701MPI-AE

Har du brug for hjælp?

Hvis du har brug for hjælp til Advantech EKI-2701MPI-AE stil et spørgsmål nedenfor, og andre brugere vil svare dig


Splitter Advantech Manualer

Advantech

Advantech EKI-2741FHPI-AE Manual

1 Oktober 2025
Advantech

Advantech EKI-2701PSI-AE Manual

15 August 2025
Advantech

Advantech EKI-2701MPI-5GPS-A Manual

19 Juli 2025
Advantech

Advantech EKI-2701MPI-5G-AE Manual

19 Juli 2025
Advantech

Advantech EKI-2701HP-AC-A Manual

8 Januar 2025
Advantech

Advantech EKI-2701HPI-AE Manual

31 December 2025
Advantech

Advantech EKI-2701MPI-AE Manual

31 December 2025

Splitter Manualer

Nyeste Splitter Manualer

IFM

IFM EBC112 Manual

31 Oktober 2025
Metra

Metra AS-1X3TSPLIT Manual

5 Oktober 2025
Metra

Metra CS-1X8HDMSPL5 Manual

5 Oktober 2025
C2G

C2G 89014 Manual

4 Oktober 2025
Magenta

Magenta MG-DA-612 Manual

2 Oktober 2025
Marmitek

Marmitek Split 614 Pro Manual

29 September 2025
Marmitek

Marmitek Split 612 Pro Manual

28 September 2025
Marmitek

Marmitek Split 814 Pro Manual

28 September 2025
AKG

AKG APS4 Manual

19 September 2025
AMX

AMX FG1052-16 Manual

14 September 2025