AFX Reeves RVEF1624LAJUDSNLW Manual

AFX Lettelse Reeves RVEF1624LAJUDSNLW

Læs gratis den danske manual til AFX Reeves RVEF1624LAJUDSNLW (1 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om AFX Reeves RVEF1624LAJUDSNLW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

LED door Luminaires In

Reeves Flush Mount

120 277- VAC / 60Hz

Page 1 o 1f 8061271 R1

Part # RVEF1624LAJUDSNLW

RVEF2032LAJUDSNLW

Limited Factory Warranty

This product is manufactured by AFX Inc. X Inc. hereby warrants that this xture is free from defects in materials and workmanship when installed and used under normal AF

operating conditions for a period of 5 years from date of purchase. This warranty covers all component parts and extends only to replacement of defective xture or

components; it does not cover failure due to improper installation, misuse, mishandling or damage incurred in transit. For questions, please class AFX 1-800- -2326. 873

Safety Precautions

 Read all safety precautions and installation instructions carefully before installing or servicing this xture. Failure to comply with these instructions could result in potentially fatal

electric shock and/or property damage.

 It is recommended that a qualied electrician perform all wiring. This xture must be wired in accordance with all national and local electrical codes.

 Do not handle any energized xture or attempt to energize any xture with wet hands or while standing on a wet or damp surface or in water.

 This xture is designed for use in a 120-277 60Hz fused circuit. This xture is compatible with a TRIAC (forward-phase or leading- -phase or trailing-VAC, edge) / ELV (reverse edge)

dimmer and 0-10V dimmers. Make sure that th e power source conforms to the requirements of the fixture. (See labels on the fixture housing).

 To reduce the risk of electrical shock, and to assure proper operation, this xture must be adequately grounded. To accomplish proper grounding, there must be a separate ground

wire (green) contact between this xture and the ground connection of your main power supply panel.

 This xture is intended to be used for general indoor lighting in dry or damp locations.

 Disclaimer

Changes or modications not expr quipment has been essly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This e

tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Canadian ICES- -005 (B). These limits are designed to 005 (B) / NMB

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful °interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiver antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult with the dealer or an experienced radio/TV technician for help.

Any modications to this xture may void the warranty and interfere with the safe operation of the luminaire.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may

cause undesired operation of the device.

Assembly Instructions

Step 1 Preparing for installation–

A. Disconnect electrical power at fuse or circuit breaker box before installing or servicing any part of this

xture.

B. Carefully remove the xture from the carton, remove components from hardware kit.

Wiring All wiring must take place inside junction box (not included) –

Caution: Make sure power is o at fuse or circuit breaker box. Check power wires for damage or

scrapes. If power supply wires are within three inches of the LED driver, use wire suitable for at least

90°C (194°F). Most dwellings built before 1985 have supply wire rated to 60°C. Consult a Note:

qualied electrician to ensure correct branch circuit conductor before installing.

Step 2 Wiring xture –

A. Make all wire connections to appropriate wire. Secure with wire nuts (provided).

B. Connect the green wire from the fixture to the supply power source ground wire.

C. For none-dimming xture. Connect the white wire from the xture to the white (N) wire from supply

power source. Connect the black fixture wire to the black (L) wire from supply power source. Gray and

purple wires are not to be used and must be individually capped to prevent shorting.

D. For TRIAC dimming. Connect the white wire from the xture to the white (N) wire from dimming

source per dimmer wiring instructions. Connect the black wire from the xture to the black (L) wire from

dimmer supply power source per dimmer wiring instructions. Gray and purple wires are not to be used and must be individually

capped to prevent shorting.

E. For (0- Connect the gray wire from the xture to the dimmer source gray wire. Connect the purple wire from the 10V) dimming.

xture to the dimmer source purple wire. Connect the white wire from the xture to the white (N) wire from dimming source per

dimmer wiring instructions. Connect the black wire from the xture to the black (L) wire from dimmer supply power source per

dimmer wiring instructions.

F. Do not mix wires. Pull on each wire lead to make sure connections are secure. Make certain no bare wires are exposed outside of

wire connectors. Tuck all connections neatly into the junction box.

Step 3 Back pan mounting –

A. Install ceiling pan (1) to junction box (not included) using two screws (2) to secure it.

Step 4 or changing temperature adjustment, CCT (if desired) –Col

A. Adjust the two switches on each board accordingly to the desired color temperature as seen below. All boards

must be set the same way. Fixture is preset to 3500K from factory.Note:

Step 5 Mounting diuser –

A. Slide diuser (3) in from the top opening between the shade and mounting pan in the xture assembly (1).

Step 6 Restore power at fuse or circuit breaker box –

Produkt Specifikationer

Mærke:	AFX
Kategori:	Lettelse
Model:	Reeves RVEF1624LAJUDSNLW

Har du brug for hjælp?

Hvis du har brug for hjælp til AFX Reeves RVEF1624LAJUDSNLW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse AFX Manualer

AFX Marquette MQTB3840L30ENWN Manual

25 September 2024

AFX Reeves RVEF1624LAJUDSNLW Manual

25 September 2024

AFX Arlo ARLS050407L35MVSN Manual

25 September 2024

AFX Grace GRCC14CBBK Manual

25 September 2024

AFX Plaza PLZS11MBBN Manual

25 September 2024

AFX Shaw SHAL054840LAJMV Manual

25 September 2024

AFX Ryland RYDV280422L30D2SN Manual

25 September 2024

AFX Novara NVS5131200L30D1SN Manual

25 September 2024

AFX Commons CMNS072716L30D2WH Manual

25 September 2024

AFX Reeves RVEF2032LAJUDSNLW Manual

25 September 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Schwaiger CALE100 511 Manual

9 April 2025

ADB Orkis Fresnel Manual

8 April 2025

Claypaky Actoris ParLED Manual

8 April 2025

ET2 Waterfall E24846-90 Manual

8 April 2025

Dainolite V166-1W Manual

5 April 2025

Dainolite OFE-161P Manual

5 April 2025

Dainolite DMLED10-A-5D Manual

5 April 2025

Dainolite DM1958F Manual

5 April 2025

NUVO Ballerina 60/1265 Manual

4 April 2025

NUVO SF77/196 Manual

4 April 2025