Akasa Apache A-ATX09-A4B Manual

Akasa Computertaske Apache A-ATX09-A4B

Læs gratis den danske manual til Akasa Apache A-ATX09-A4B (1 sider) i kategorien Computertaske. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Akasa Apache A-ATX09-A4B, eller vil du spørge andre brugere om produktet?

Side 1/1
radiator
GB
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-controlled workstation is not
available, wear an antistatic wrist strap or touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges can cause injury if not handled
with care.
CUIDADO
Descargas Eletroestáticas (ESD) podem danificar componentes do PC. Caso não tenha uma bancada
específica disponível, utilize uma pulseira anti-estática ou toque uma superfície aterrada antes de manusear
qualquer componente.
ATENÇÃO
Por favor tenha cuidado ao desembrulhar e montar este produto, as extremidades de metal podem
machucar, caso o mesmo não seja manuseado com cuidado.
User manual
Product Code: A-ATX09
Contents
Top Panel
Internal cable connectors
GB
Connect the case internal cable connectors to the corresponding motherboard
headers.
NOTE : If the connectors are not apparent on the board consult your motherboard
manual. Connecting the panel to the wrong headers may result in motherboard
damage.
Conecte os cabos internos do gabinete, nas entradas correspondentes da
placa-mãe.
NOTA : No caso das entradas não estarem marcadas na placa-mãe, consulte o
manual da mesma. Conectar os cabos numa entrada errada, pode danificar a
placa-mãe.
Installation
2019/10/V1
GB
Remove the front panel by gently pulling the bottom
first, then the top.
PT
Remova o painel frontal puxando a parte de baixo
primeiro, em seguida a parte de cima.
GB
Remove both side panels by undoing the thumbscrews
and pulling the panels towards the rear.
PT
Remova as laterais soltado os parafusos
(pode ser com as mãos) e puxando as laterais para trás.
GB
Place the motherboard in the correct position, align the holes and secure it by using motherboard screws.
PT
Coloque a placa-mãe na posição correta, alinhando-a com os furos e fixe-a com os parafusos.
Front panel removal
Side panels removal
Motherboard
1
2
GB
Fasten the fan or radiator to the top, front, or rear of the case.
PT
Fixe os ventiladores ou o radiador do water cooler na parte superior, frontal
ou traseira do gabinete.
Cooling system support
HDD
GB
Remove the corresponding PCI backplate for the add on card,
install and secure with the PCI backplate screw.
PT
Remova o backplate PCI com o slot correspondente que será
utilizado na placa-mãe para instalação da placa. Instale a placa e
fixe-a com os parafusos para PSU / PCI.
Graphics cards
GB
Insert the PSU into its position and secure with PSU
screws.
PT
Encaixe a fonte de alimentação na posição correta e
fixe-a com os parafusos.
PSU
GB
Remove the corresponding PCI backplate before
installing the graphics card, secure with the PCI back-
plate screw.
PT
Remova o backplate PCI do slot correspondente que
será utilizado na placa-mãe para instalação, encaixe a
placa de vídeo e fixe com o parafuso.
PCIe / PCI / AGP cards
GB
HDD mounting hole
Place the HDD/SSD in the correct position, align the holes and secure it by using the HDD screws.
HDD tray
Slide the tray out from the HDD cage. Secure the 2.5” HDD/SSD on to the tray with the HDD screws or the 3.5" HDD with the
screw-less mounting clip. Slide the tray back into the HDD cage.
PT
Furo de fixação do HDD
Coloque o HDD/SSD na posição correta, alinhe a furação e fixe-o utilizando os parafusos para HD.
Bandeja do HD
Deslize a bandeja para fora do compartimento do disco rígido, prenda o HDD/SSD de 2,5" na bandeja com os parafusos ou
use o clipe de montagem sem parafusos para HDD de 3,5 ". Deslize a bandeja de volta ao compartimento.
Fan
Micro ATXATX
POWER LED+
POWER LED-
Power LED
connectors
H.D.D LED
HDD
activity LED
HD AUDIO
POWER SW
2-pin Power
Switch
connector
USB 2.0
connector
RESET SW
Reset Switch
connector
HD Audio
connector
USB 3.0
internal cable
x 5
x 2 x 8 x 8
x 9 x 3 x 8
x 10
GB
❶ ❷ ❸Cable ties Motherboard screws Motherboard standoffs
❹ ❺ ❻ 3.5” HDD screws HDD tray screws 2.5" SSD rubber pad screws
❼ ❽2.5" SSD rubber pads PSU / PCI backplate screws
❶ ❷ ❸Abraçadeiras parafusos para plca-mãe Espaçadores para placa-mãe
❹ ❺parafusos para HDD 3.5” parafusos da bandeja HDD
❻Parafusos de almofada de borracha SSD de 2,5 "
❼ ❽Almofadas de borracha SSD de 2,5 " Parafusos para PSU / PCI
Power switch
Hard Drive LED
Power LED
Reset switch
USB 3.0 port
USB 2.0 ports
Audio IN / OUT
up to 345mm
2.5” HDD/SSD x2
3.5” HDD/SSD p1-x2
( or 2.5” HDD/SSD )
2.5” HDD/SSD x2
2
1
1
3.5” HDD/SSD 2.5” HDD/SSD
Gaming ATX Case
APACHE AIR
Mini ITX
Right sideLeft side
2.5 HDD/SSD x 4 + 3.5HDD/SSD x 2


Produkt Specifikationer

Mærke: Akasa
Kategori: Computertaske
Model: Apache A-ATX09-A4B

Har du brug for hjælp?

Hvis du har brug for hjælp til Akasa Apache A-ATX09-A4B stil et spørgsmål nedenfor, og andre brugere vil svare dig