Alto APX1000 Manual

Alto Modtager APX1000

Læs gratis den danske manual til Alto APX1000 (8 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Alto APX1000, eller vil du spørge andre brugere om produktet?

Side 1/8
APX1000
QUICKSTART GUIDE
ENGLISH
2
Do NOT make any connections
when any device is powered on.
Note: Please see the SPEAKER
CONNECTION section for important
setu
p
information.
QUICKSTART GUIDE (ENGLISH)
BOX CONTENTS
APX1000
Power cable
Quickstart Guide
Safety & Warranty Information Booklet
QUICK SETUP
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place all devices in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all sound sources' outputs to amplifier inputs as indicated in the diagram.
7. Connect the amplifier outputs to speakers.
8. Plug all devices into an appropriate power source.
9. Switch everything on in the following order:
Sound sources (i.e. microphones, turntables, CD players, etc.)
Mixer
Amplifier
Speakers
10. When turning powering down, turn everything off in the following order:
Speakers
Amplifier
Mixer
Sound sources
CONNECTION DIAGRAM
PUS H PUSH


Produkt Specifikationer

Mærke: Alto
Kategori: Modtager
Model: APX1000
Vekselstrømsindgangsspænding: 100-240 V
Vekselstrømsindgangsfrekvens: 50 - 60 Hz
Bredde: 483 mm
Dybde: 285 mm
Højde: 89 mm
Vægt: 5800 g
Produktfarve: Sort
Frekvensområde: 20 - 25000 Hz
Lyd-output kanaler: 2.0 kanaler
LED-indikatorer: Ja
klirfaktor (THD): 0.5 %
Signal/støjforhold: 110 dB
Forstærker klasse: D
Spidseffekt pr. kanal: - W
Højttalere tilslutningstype: XLR / 1⁄4" TRS
XLR indgang: Ja
Indgangsimpedans: 10000 ohm (Ω)
RMS udgangseffekt pr. kanal (4 Ohm): 500 W
RMS udgangseffekt pr. kanal (8 ohm): 250 W
Indgangsfølsomhed: 1000 mV

Har du brug for hjælp?

Hvis du har brug for hjælp til Alto APX1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig