AMX SC-N8001 Manual

AMX Controller SC-N8001

Læs gratis den danske manual til AMX SC-N8001 (62 sider) i kategorien Controller. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om AMX SC-N8001, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/62
USER MANUAL
N-SERIES CONTROLLERS
N-COMMAND 2.0 CONTROL APPLICAT IONS
SVSI SYST E M C O N FIGURAT IO N M A NAG E M E N T
S C - N 8 0 0 1 ( 5 U S E R S / 5 0 D E V IC E S ) , S C - N 8 0 0 2 ( U N L I M I T E D ) , S C - N 8 0 1 2 ( E N T E R P RI S E )
IMPORTANT SAFETY INSTRUCTIONS
COPYRIGHT NOTICE
AMX© 2018, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of AMX. Copyright protection claimed
extends to AMX hardware and software and includes all forms and matters copyrightable material and information now allowed by statutory or judicial
law or herein after granted, including without limitation, material generated from the software programs which are displayed on the screen such as
icons, screen display looks, etc. Reproduction or disassembly of embodied computer programs or algorithms is expressly prohibited.
LIABILITY NOTICE
No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the preparation of this
publication, AMX assumes no responsibility for error or omissions. No liability is assumed for damages resulting from the use of the information
contained herein. Further, this publication and features described herein are subject to change without notice.
AMX WARRANTY AND RETURN POLICY
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
13. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
15. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
16. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
18. Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
19. Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is
not compromised.
20. Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical
loading.
21. Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the
circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when
addressing this concern.
22. Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections
other than direct connections to the branch circuit (e.g. use of power strips).
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an outside
source (such as human hands) into an integrated circuit, often resulting in damage to the circuit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING: No naked flame sources - such as candles - should be placed on the product.
WARNING: Equipment shall be connected to a MAINS socket outlet with a protective earthing connection.
WARNING: To reduce the risk of electric shock, grounding of the center pin of this plug must be maintained.

Produkt Specifikationer

Mærke: AMX
Kategori: Controller
Model: SC-N8001

Har du brug for hjælp?

Hvis du har brug for hjælp til AMX SC-N8001 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Controller AMX Manualer

AMX

AMX SC-N8001 Manual

30 August 2024
AMX

AMX SC-N8012 Manual

30 August 2024
AMX

AMX MU-1300 Manual

27 August 2024
AMX

AMX MU-1000 Manual

27 August 2024
AMX

AMX NXF-MINI Manual

27 August 2024
AMX

AMX NetLinx NX-1200 Manual

27 August 2024
AMX

AMX NXA-WAPZD1100 Manual

27 August 2024
AMX

AMX AXB-REL8 Manual

27 August 2024
AMX

AMX AXB-232++ Manual

27 August 2024
AMX

AMX AXB-DMX512 Manual

27 August 2024

Controller Manualer

Nyeste Controller Manualer

IPEGA

IPEGA PG-9055 Manual

11 Februar 2025
Rosco

Rosco Control Box Manual

30 Januar 2025
DJI

DJI Motion Controller Manual

14 Januar 2025
8BitDo

8BitDo Ultimate C Wired Controller Xbox Manual

11 Januar 2025
Sonance

Sonance VC30R Manual

8 Januar 2025
BeamZ

BeamZ WTR10-5 Manual

5 Januar 2025
Somfy

Somfy Keypad 2 RTS Manual

1 Januar 2025
Somfy

Somfy Keypop RTS Manual

1 Januar 2025
Somfy

Somfy Wall Switch 3 RTS Manual

1 Januar 2025
Logitech

Logitech Driving Force Shifter Manual

31 December 2025