APsystems QT2 Manual

APsystems Ikke kategoriseret QT2

Læs gratis den danske manual til APsystems QT2 (26 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om APsystems QT2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/26

Please scan this QR code to have

access to our APPs and Products

information

APsystems QT2 Microinverter

(For EMEA)

APsystems Microinverter Installation manual

ALTENERGY POWER SYSTEM Inc.

emea.APsystems.com

APsystems

Karspeldreef 8, 1101 CJ, Amsterdam, The Netherlands

EMAIL: info.emea@APsystems.com

APsystems

22 Avenue Lionel Terray 69330 Jonage France

EMAIL:info.emea@APsystems.com

APsystems Microinverter QT2 Installation manual

Table of Contents

1. Important Safety Instructions ......................................................................................................... 2

1.1 Safety Instructions .......................................................................................................................................... 2

1.2 Radio Interference Statement ........................................................................................................................ 3

1.3 Symbols in lieu of words.................................................................................................................................4

2. APsystems Microinverter System Introduction ..............................................................................5

3. APsystems Microinverter QT2 Introduction ................................................................................... 7

4. APsystems Microinverter System Installation ................................................................................ 8

4.1 Additional accessories supplied by APsystems ..............................................................................................8

4.2 Other required accessories not supplied by APsystems ............................................................................... 8

4.3 Installation Procedures ...................................................................................................................................9

4.3.1 Step 1 - Verify that grid voltage matches microinverter rating.......................................................... 9

4.3.2 Step 2 – AC Bus Cable distribution ......................................................................................................9

4.3.3 Step 3 - Attach the APsystems Microinverters to the Racking ........................................................... 9

4.3.4 Step 4 - Ground the system...............................................................................................................10

4.3.5 Step 5 - Connect the APsystems microinverter to AC bus cable ...................................................... 10

4.3.6 Step 6 - Install a Bus Cable End Cap at the end of AC bus cable ...................................................... 11

4.3.7 Step 7 - Connect APsystems Microinverters to the PV Modules ......................................................12

4.3.8 Step 8 - Connect APsystems Microinverters to Grid .........................................................................13

4.3.9 Step 9 - AC Extension Cable .............................................................................................................. 13

4.3.10 Step 10 - Complete the APsystems installation map ...................................................................... 14

4.3.11 Step 11 - Warning Notice ................................................................................................................ 14

5. APsystems microinverter system operating instructions .............................................................15

6. Troubleshooting .............................................................................................................................16

6.1 Status Indications and Error Reporting ........................................................................................................ 16

6.1.1 Start up LED ....................................................................................................................................... 16

6.1.2 Operation LED ................................................................................................................................... 16

6.1.3 GFDI Error .......................................................................................................................................... 16

6.2 ECU_APP ....................................................................................................................................................... 16

6.3 Installer EMA (web portal or EMA Manager APP) ....................................................................................... 16

6.4 Trouble Shooting Guide ................................................................................................................................16

6.5 APsystems Technical Support ....................................................................................................................... 17

6.6 Maintenance .................................................................................................................................................17

7. Replace a microinverter ................................................................................................................ 18

8. Technical Data................................................................................................................................19

8.1 QT2 3-Phase Microinverter Datasheet .........................................................................................................20

9. QT2 - Wiring Diagram .................................................................................................................... 21

9.1 QT2 Connected To Detla Type 3-Phase Grid ................................................................................................ 21

9.2 QT2 Connected To Wye 3-Phase Grid .......................................................................................................... 22

10.QT2 Accessory ...............................................................................................................................23

10.1 Dimensions ................................................................................................................................................. 23

10.2 Wiring Diagram ...........................................................................................................................................24