Aqara Ceiling Light T1M Manual

Aqara Lettelse Ceiling Light T1M

Læs gratis den danske manual til Aqara Ceiling Light T1M (8 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Aqara Ceiling Light T1M, eller vil du spørge andre brugere om produktet?

Side 1/8
CAUTION:
If it does not light up after turning on the power, please confirm whether the
installation and wiring of the lamp are correct. The light source in this luminaire
should be replaced by the manufacturer or its service agent or a similarly qualified
person.
Unstable ceiling Warning: Risk of electrical shock!
Installation Manual
Warning: Before installing the lamp, the power must be cut off to prevent electric shock.
1. Turn off the power at the circuit breaker and the light switch. Install the mounting
brackert on the junction box using the junction box screws. Ensure that the two
mounting bracket screws are pointing away from the ceiling.
2. Place the base on the mounting bracket. Temporarily screw the base of the
luminaire to the mounting bracket using the butterfly screws.
3. Mark on the ceiling the 3 locations where the holes will be drilled and remove the


Produkt Specifikationer

Mærke: Aqara
Kategori: Lettelse
Model: Ceiling Light T1M

Har du brug for hjælp?

Hvis du har brug for hjælp til Aqara Ceiling Light T1M stil et spørgsmål nedenfor, og andre brugere vil svare dig