ArmyTek Tiara Pro Manual

ArmyTek Lommelygte Tiara Pro

Læs gratis den danske manual til ArmyTek Tiara Pro (2 sider) i kategorien Lommelygte. Denne vejledning er vurderet som hjælpsom af 82 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 41.5 anmeldelser. Har du et spørgsmål om ArmyTek Tiara Pro, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Specifications

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

USER MANUAL

THE MOST TECHNICALLY ADVANCED

Warnings

Care and Storage

Service and Warranty

Specifications are subject to change without notice.

Model

Tiara A1 Pro

Tiara C1 Pro

LED / Optics

Cree / TIRXP-L or XM-L2

Brightness stabilization type

FULL (constant light)

Light output, LED / OTF lumens*

600 / 450

800 / 610

Peak beam intensity, candelas

1840

2160

Hotspot / spill

70 ° / 1 0°2

Beam distance*

86 meters

93 meters

Modes, light output (OTF

lumens*) and runtimes

(measured with Sanyo

Eneloop AA 2000 mAh /

Armytek CR123A 1500 mAh

until the light output drops to

10% of the initial value)

Turbo2

450 lm / 0.8h

610 lm / 0.7h

Turbo1

250 lm / 1.2h

250 lm / 1.8h

Main3

90 lm / 4.2h

90 lm / 6.2h

Main2

30 lm / 11.7h

30 lm / 18h

Main1

9 lm / 35h

9 lm / 55h

Firefly2

1.9 lm / 8d

1.9 lm / 13d

Firefly1

0.15 lm / 90d

0.15 lm / 140d

Strobe3

1Hz / 30 /lm 60h

1Hz / 30 /lm 90h

Strobe2

1Hz / /450lm 6h

1Hz / /610lm 3.3h

Strobe1

10Hz / /450lm 1.7h

10Hz / /610lm 1.7h

Power source

1xAA / x14500 Li-Ion1

1x18350 Li-Ion / xR123 Li-Ion / 1x R123A1 С

Size and weight (without batteries)

Length 93mm, body diameter 24.5mm,

head diameter 29mm, weight 59g

Length 79mm, body diameter 24.5mm,

head diameter 29mm, weight 56g

Armytek Optoelectronics Inc.

Web: www.armytek.com Email: service@armytek.com

Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada

Tiara

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your

needs. The components made in the USA and Japan. .10 years no-hassle warranty

§Superb light of amazing constant brightness due to powerful electronics.

§Multi-flashlight “10 in 1" is for many activities: car, fishing, hunting, home, work, city, picnic, bike, outdoor, travel.

§Efficient TIR-optics and no “tunnel vision” effect even after continuous use.

§Multicolor Warning Indication of low battery level.

§Side switch for comfortable one-hand operation and easy modes switching with advanced operation.

§Multicolor State Indication and ultra low current drain in OFF-state more than 25 years.–

§Comfortable headband for reliable fixation of the flashlight – it won’t slip even while you’re running.

§Solid body without long wires, weak rubber connectors and unnecessary boxes.

§Removable magnet in the tailcap, removable clip, strong lanyard and possibility of tail-stand for multipurpose use.

§Compact and light-weight flashlight of guaranteed durability stands up harsh impacts and falling from 10 meters.

§–Total protection from water, dirt and dust penetration flashlight continues to work even at the depth of 10 meters.

We DO NOT RECOMMEND to use low-quality CR123A batteries, because they can explode.

* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.

Armytek provides free warranty repair for 10 years from the purchase.date of

Warranty doesn't cover damage caused by:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less

capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

The producer will not be liable for any harm done to the user if it was caused by

improper use of the product.

It is recommended to clean the threads and O-ring off dirt and old greases once or twice per year. Remember that protection reliable

from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and

sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as

it can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of

automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts

as often as required.

The flashlight will get hot in Turbo mode quickly and discharge the battery by high current. Don't leave it without your attention as very

bright light can heat objects and be a cause of the fire.

We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can

leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in use then