Atdec AF-AT-W-P Manual


Læs gratis den danske manual til Atdec AF-AT-W-P (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Atdec AF-AT-W-P, eller vil du spørge andre brugere om produktet?

Side 1/4
AF-AT-W Page 1 of 4
COMPONENT CHECKLIST
B
VESA
head
(x1)
C
End Cap
(x1)
Wall Plate
(x1)
A
Arm Assembly
(x1)
O
Security Screw
M4 x 16mm
(x1)
I
Nylon Anchor
Plug
(x2)
J
Countersunk
Screws
M4 x 12mm
(x2)
Countersunk
Screws
M6 x 50mm
(x2)
G
2.5mm
Allen key
(x1)
5mm
Allen key
(x1)
L
Mounting
screws
M4 x 10mm
(x4)
M
Mounting
screws
M4 x 12mm
(x4)
N
Mounting
screws
M4 x 16mm
(x4)
E
Primary arm
cable cover
(x1)
F
Secondary arm
cable cover
(x1)
Installation Guide
AF-AT-W
Wall Mounted Monitor Arm
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
REQUIRED TOOLS
WEIGHT RANGE
• Power Drill
• Drill Bit
• Phillips Head Screwdriver
0 - 8kg
(0 - 17.6lbs)
AF-AT-W Page 2 of 4
Note: The wall-mounted
arm provides vertical
adjustment of 128mm.
128mm (5”)
140mm (5 1/2”)
v
1. Position Wall Plate
2. Choose the appropriate installation procedure depending on your wall type
3. Mount Arm Assembly
Wall Plate
Nylon
Anchors
8mm (5/16”)
Hole
M6 x 50mm
Countersunk
Screw
Locking Dial
Wall Plate
Locking Dial
2.5mm Allen Key
End Cap
M4x12mm
Countersunk Screw
Timber
Stud
5.5mm
(1/4”) Hole
M6 x 50mm
Countersunk
Screw
Wall Plate
As a guide, it is recommended
that the bottom of the
Wall Plate be positioned
approximately 140mm (5 1/2”)
above the desktop.
Masonry
3.1 Unlock the Locking Dial before
inserting the Arm Assembly into the
Wall Plate
3.2 Slide the Arm Assembly to the preferred
height and lock to secure the arm
3.3 Secure the End Cap with the
supplied M4x12mm Countersunk
Screws and 2.5mm Allen Key
Timber Stud


Produkt Specifikationer

Mærke: Atdec
Kategori: Ikke kategoriseret
Model: AF-AT-W-P
Bredde: 463 mm
Antal pr. pakke: 1 stk
Produktfarve: Sort, sølv
Pakkevægt: 1400 g
Pakkedybde: 320 mm
Pakkebredde: 170 mm
Pakkehøjde: 120 mm
Husmateriale: Aluminium, Plastic
Monteringstype: Væg
Hovedkassen højde (udvendigt): 260 mm
Hovedkassens længde (udvendigt): 870 mm
Hovedkassens bruttovægt (udvendigt): 15000 g
Hovedkassens bredde (udvendigt): 360 mm
Højdejustering: Ja
Hældningsvinkelområde: -70 - 70 °
Produkter pr. hovedkasse (udvendigt): 10 stk
Panoreringsområde: 0 - 180 °
Maksimal vægtkapacitet: 8 kg
Hældningsindstilling: Ja
Forbedret kabelstyring: Ja
Maksimal skærmstørrelse kompatibilitet: - "
Antal understøttede skærme: 1
Minimal skærmstørrelse kompatibilitet: - "
Montering interface kompatibilitet (min.): 75 x 75 mm
Montering interface kompatibilitet (maks.): 100 x 100 mm
Afstand til væggen (maks.): 463 mm

Har du brug for hjælp?

Hvis du har brug for hjælp til Atdec AF-AT-W-P stil et spørgsmål nedenfor, og andre brugere vil svare dig