Atoll PH200 Manual

Atoll Ikke kategoriseret PH200

Læs gratis den danske manual til Atoll PH200 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Atoll PH200, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ PHONO PREAMPLIFIER PH200
ATOLL ELECTRONIQUEPage 5Page 4
CONNECTING
8) ON/SLEEP led indicator.
DETAILS OF FUNCTIONS
1
5 6 7
8
(1)
ON/SLEEP of your PH200 simultaneously with any device
equipped with a compatible Trigger output. In order for the
system to work, the button on your PH200 must ON/SLEEP
remain in the position (0). If the switch is in the (I) SLEEP ON
position, it will work but not the Trigger function.
The Trigger connection must be made with a Ø 3,5 mm Male/Male stereo
jack cable.
Jack cable
Ø 3,5 mm
2 3 4
The PH200 phono module allows you different configurable configurations. They
can be carried out directly at the rear of the module via the 2 4-point switch blocks,
one for the left channel and the other for the right channel (you can also refer to the
screen-printed diagrams on the rear side). Make sure that the 2 switch blocks are in
the same position.
1) MM – MC setting: Depending on the cartridge of your phono turntable, you can
select the MM or MC input.
2) Choice of input capacitor: This setting concerns both the MM and MC cells. It
allows you to adapt the musicality of your PH200 to your system.
• For an MM cell, set and to OFF.3 4
• For a high level MC cell (MCH), place to ON, 3
and to OFF.4
• For a MC Low Level (MCL) cell, set and to ON.3 4
• For no input capacitor set and to OFF 1 2
(recommended by default).
• To select a 100 pF capacitor set to ON, and to 1 2
OFF.
• To select a 220 pF capacitor place to OFF, and 1
2 to ON.
• To select a 320 pF capacitor set to ON, and to 1 2
ON.
CONFIGURATIONS
3 4
MM OFF OFF
MC High ON OFF
MC Low ON ON
1 2
Default OFF OFF
100 pF ON OFF
220 pF OFF ON
320 pF ON ON
Caution: This adjustment must be made when the PH200 and the amplier
are turned off.
Caution: This adjustment must be made when the PH200 and the amplier
are turned off.
1) Ground.
2) Turntable signal input.
3) Settings blocks.
4) Module signal output.
5) Trigger input 12 V
(1)
.
6) General power plug.
7) ON/SLEEP switch (Attention: the
power-on led indicator takes a long
time to turn-off).
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ PHONO PREAMPLIFIER PH200
ATOLL ELECTRONIQUEPage 3Page 6
CAUTIONS
ADVISES
E.C. marking certified the conformity with low tension directive 73/23/CEE, directive
CEM 89/336/CEE and national transpositions.
E.C. MARKING
Before any cleaning, switch off your amplifier (6). Use a soft and dry rag to clean up
the appliance. Never use acetone, white-spirit, ammoniac, or any kind of product
containing abrasive agent. Never try to clean up inside the appliance.
The guarantee is period from date of purchase. We recommend you to ask two years
your dealer to fill the guarantee and to conserve it. The guarantee is only available
for appliance which have been use correctly.
CLEANING
WARRANTY CONDITIONS
(*)
Depending on the position of the switches.
(Data subject to change)
• Do not make any connections when your device is powered on.
• Put your device in a dry and well ventilated place, far from a source of
heat
• Avoid putting something on your amplifier.
• Do not make any plug-in when the converter is on.
• Avoid any short-cut.
• Strictly respect polarity
+
& , as well as the left and right connections.
• Your device will offer you optimal listening quality approximately half an
hour after it is powered on, until the stages reach their ideal operating
temperature.
• At night or when you leave your home it is best to use the main switch to
turn off the device.
• We advise you to choose good quality connection cords (to other
devices). Do not hesitate to seek advice from your specialist retailer.
PHONO PH200 MODULE
Power supply :
Total of capacitors :
Switch OFF consumption:
ON consumption:
Type of cartridges:
Input impedance:
Input capacity:
Gain MM :
Gain MC High-level:
Gain MC Low-level:
Signal-to-noise ratio at 1 kHz:
Crosstalk at 1 kHz:
THD:
Size:
Weight:
2×7 VA
54 400 µF
0 W
1 W
MM / MC
47 kΩ
Nothing / 100 pF / 220 pF / 320 pF
(*)
40 dB
(*)
47 dB
(*)
60 dB
(*)
80 dB
<-86 dB
0,05 %
440×295×63 mm
5 Kg

Produkt Specifikationer

Mærke: Atoll
Kategori: Ikke kategoriseret
Model: PH200

Har du brug for hjælp?

Hvis du har brug for hjælp til Atoll PH200 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Atoll Manualer

Atoll

Atoll PH200 Manual

4 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Falmec

Falmec Brooklyn Manual

4 Oktober 2025
Tempo

Tempo 915CL Manual

4 Oktober 2025
StarTech.com

StarTech.com F35023-USB-EXTENDER Manual

4 Oktober 2025
EasyMaxx

EasyMaxx 04670 Manual

4 Oktober 2025
LC-Power

LC-Power Arkangel 3 LC8850III V2.3 Manual

4 Oktober 2025
Falmec

Falmec Brera 75 Manual

4 Oktober 2025
Kenwood

Kenwood Mesmerine TFM810 Manual

4 Oktober 2025
AFK

AFK EWK-2200.7C Manual

4 Oktober 2025
Realme

Realme Narzo 60x Manual

4 Oktober 2025
AFK

AFK RC-22.16 Manual

4 Oktober 2025