AXESS AX-TYAMP2-SWC Manual

AXESS Ikke kategoriseret AX-TYAMP2-SWC

Læs gratis den danske manual til AXESS AX-TYAMP2-SWC (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12 anmeldelser. Har du et spørgsmål om AXESS AX-TYAMP2-SWC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AX-TYAMP2-SWC

I N S TA L L A T I O N I N S T R U C T I O N S

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.) • Small ﬂat-blade screwdriver

TABLE OF CONTENTS

Connections to be made ....................................2-3

- 3.5mm jack steering wheel control retention

...3

Installing the AX-TYAMP2-SWC .............................3

Programming the AX-TYAMP2-SWC......................4

Adjusting the AX-TYAMP2-SWC .............................4

Steering wheel control settings ........................5-7

- L.E.D. feedback ....................................................5

- Changing radio type ...........................................5

- Remapping the steering wheel control buttons ...6

- Dual assignment instructions (long button press)

... 7

Troubleshooting .....................................................8

Toyota Amp Interface with SWC 2012-up*

APPLICATIONS

• Retains audio controls on the

steering wheel

• Provides NAV outputs (reverse)

• Retains the factory AUX-IN jack

• Designed for ampliﬁed models

• Retains balance

• Micro “B” USB updatable

TOYOTA

Avalon * 2013-up

4-Runner 2014-up

Camry 2014-2017

Camry (w/ nav) 2012-2013

Highlander 2014-up

Prius 3rd Gen (w/ nav) 2012-2015

Plug-In (PHV) (w/ nav) 2012-2015

Prius V 2012-2017

Rav-4 2014.5-up

Sequoia 2014-up

Sequoia (w/ nav) 2013

Sienna 2015-up

Tacoma 2014-up

Tundra * 2014-up

Venza 2015

Venza (w/ HDD based nav) 2013-2014

• AX-TYAMP2-SWC interface

• AX-TYAMP2-SWC harness

• Female 3.5mm connector with stripped lead

*Visit AxxessInterfaces.com for up-to-date vehicle speciﬁc applications.

* Only for models with a JBL ampliﬁer

CONNECTIONS TO BE MADE

From the 16-pin harness with stripped leads to the aftermarket radio:

• Connect the wire to the amp turn on wire. This wire must be connected to hear Blue/White

sound from the factory ampliﬁer.

• Connect the wire to the right front positive speaker output.Gray

• Connect the Gray/Black wire to the right front negative speaker output.

• Connect the wire to the left front positive speaker output.White

• Connect the wire to the left front negative speaker output.White/Black

• Connect the wire to the left rear positive speaker output.Green

• Connect the Green/Black wire to the left rear negative speaker output.

• Connect the wire to the right rear positive speaker output.Purple

• Connect the wire to the right rear negative speaker output.Purple/Black

• Tape off and disregard the following (6) wires, they will not be used in this application:

Blue/Pink Brown Green/Purple Light Green Orange/White, , , , , Red.

From the AX-TYAMP2-SWC harness to the aftermarket radio:

• Connect the wire to the ground wire.Black

• Connect the Yellow wire to the battery wire.

• Connect the wire to the accessory wire.Red

• Connect the wire to the power antenna wire.Blue

• If the aftermarket radio has an illumination wire, connect the wire to it.Orange

The following (1) wire is for an aftermarket multimedia/navigation radio that requires this wire.

If not required, tape it off and disregard it.

• Connect the Green/Purple wire to the reverse wire.

• If retaining the factory AUX-IN jack, connect the & RCA jacks to the AUX input.Red White

Continue to 3.5mm jack steering wheel control retention

Produkt Specifikationer

Mærke:	AXESS
Kategori:	Ikke kategoriseret
Model:	AX-TYAMP2-SWC

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AX-TYAMP2-SWC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AXESS Manualer

AXESS AXBUCH-MZ6V Manual

29 Juli 2025

AXESS AXABH-CH3 Manual

29 Juli 2025

AXESS AXDSPX-HK5 Manual

25 Februar 2025

AXESS AXAMP-CH8 Manual

25 Februar 2025

AXESS AXTC-MZ1 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM26V Manual

25 Februar 2025

AXESS AXAMP-FD2 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM36V Manual

25 Februar 2025

AXESS AXAMP-TY1 Manual

25 Februar 2025

AXESS AXAMP-TY4 Manual

25 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025