Axxess AXAMP-FD3 Manual

Axxess Ikke kategoriseret AXAMP-FD3

Læs gratis den danske manual til Axxess AXAMP-FD3 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Axxess AXAMP-FD3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AXAMP-FD3

INSTALLATION INSTRUCTIONS

INTERFACE FEATURES

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape

• Wire cutter

• Zip-ties

• Multimeter

TABLE OF CONTENTS

Installation & Installation Options ........................2

Adding Amp(s) to a Factory System ....................3

Troubleshooting.....................................................4

• Designed for non-amplified vehicles

• Provides 6 channels of 5-volt RMS audio

• Non-fading full-range output (channels 5 and 6)

• Simple plug-n-play installation behind the radio

• No programming required

• Dual-colored LED display

• Input: 50W per channel

• Amp turn on trigger (DC): 250mA

• 2-channel S/PDIF out (front)

APPLICATIONS

Visit AxxessInterfaces.com for current application list

INTERFACE COMPONENTS

• AXAMP-FD3 Amplifier integration interface

• AXAMP-FD3 vehicle T-harness

• Bass knob

• LD-DSP-RPAD3

Amplifier Integration Interface

Fits Ford Select Models

2020-Up

www.MetraOnline.com

MetraOnline.com may be used to assist

with dash assembly instructions. Simply

enter your Year, Make, Model vehicle

into the vehicle fit guide and look for the

Dash Kit Installation Instructions.

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights, are

plugged in before reconnecting the battery or cycling

the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Adding a full-range of amps and subwoofer to a factory system:

This feature offers the ability to add a full-range amp and sub to a factory system.

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps

combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

1. Disassemble the dash, unplug all connectors, and then remove the factory radio.*

2. Install the AXAMP-FD3 vehicle T-harness to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. Plug the AXAMP-FD3 vehicle T-harness to the AXAMP-FD3 interface.

4. Plug the AXAMP-FD3 interface harness to the AXAMP-FD3 interface.

5. Connect the amp turn-on wire.

6. Adjust your aftermarket amplifier to a desired listening level.

7. The Bassknob is used to adjust the output of channels 5 & 6 of the AXAMP.

Adjustment is as follows:

Counterclockwise turn lowers the volume of channels 5 & 6.

Clockwise turn raises the volume of channels 5 & 6.

*For dash disassembly instructions, refer to metraonline.com. Enter the year, make,

and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra

Radio Install kits.

INSTALLATION OPTIONS INSTALLATION

Produkt Specifikationer

Mærke:	Axxess
Kategori:	Ikke kategoriseret
Model:	AXAMP-FD3

Har du brug for hjælp?

Hvis du har brug for hjælp til Axxess AXAMP-FD3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Axxess Manualer

Axxess AXFD-USB3 Manual

2 Oktober 2025

Axxess AXTO-VW1 Manual

2 Oktober 2025

Axxess AX-PS Manual

2 Oktober 2025

Axxess AXTC-HN1 Manual

2 Oktober 2025

Axxess AXDIS-PO52 Manual

2 Oktober 2025

Axxess AXSUB-GM1 Manual

1 Oktober 2025

Axxess AXDI-GM4 Manual

1 Oktober 2025

Axxess AXTC-FD3 Manual

1 Oktober 2025

Axxess AXDSPH-MI1 Manual

1 Oktober 2025

Axxess ANC-CHH2 Manual

1 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Falmec Brera 75 Manual

4 Oktober 2025

Kenwood Mesmerine TFM810 Manual

4 Oktober 2025

AFK EWK-2200.7C Manual

4 Oktober 2025

Realme Narzo 60x Manual

4 Oktober 2025

AFK RC-22.16 Manual

4 Oktober 2025

Black Box HG-2 Manual

4 Oktober 2025

Sony SNCA-AN1 Manual

4 Oktober 2025

AFK PME-2000.15.1 Manual

4 Oktober 2025

Orangemonkie Foldio1 Manual

4 Oktober 2025

Kenwood Elegancy ZJP11 Manual

4 Oktober 2025