Axxess AXSSO-FD Manual


Læs gratis den danske manual til Axxess AXSSO-FD (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Axxess AXSSO-FD, eller vil du spørge andre brugere om produktet?

Side 1/8
AXSSO-FD
INSTALLATION INSTRUCTIONS
Patent #10844821, 11459994, 11493012
AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 4/24/23 INSTAXSSO-FD
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Zip ties • Cutters (for zip ties)
• USB Micro-B cable
(Axxess part number AXUSB-MCBL)
TABLE OF CONTENTS
Programming .........................................................2
Connections ............................................................3
Operation................................................................4
Ford Stop/Start Override Interface 2015-Up
APPLICATIONS
Allows the override of the STOP/START engine feature
The factory STOP/START button can resume the STOP/START feature
Can be used with either a factory or aftermarket radio
Vehicle type configured through the Axxess Updater software program
Simple plug n’ play installation, no wiring required
The AXSSO-FD is designed to disengage the STOP/START feature of the vehicle, and keep that feature disengaged even after the key has been
cycled. The AXSSO-FD will work with either an aftermarket radio, or a factory radio. A simple plug n’ play installation is all that is required to install
the device in the vehicle, and programming through a Windows 10 computer via the Axxess Updater software program.
Ford
Bronco .............................................................2022
Edge .......................................................2015-2020
Escape ....................................................... 2017-Up
F-150..........................................................2015-Up
Focus ......................................................... 2016-Up
Fusion .......................................................2015-Up
• AXSSO-FD interface
• AXSSO-FD harness (qty. 2)
Product Info
INTRODUCTION
2
PROGRAMMING
(Figure A) (Figure B) (Figure C)
1.
2.
3.
4.
Download and install the Axxess Updater software program from:
axxessinterfaces.com/resources/updater-software
On the next screen that opens, select the year, make, and model of the
vehicle, then press Program Interface. (Figure B)
Connect the micro-B USB cable (sold separately) to the computer and
AXSSO-FD interface. Open the Axxess Updater software program and
wait until the word Ready is shown in the bottom left of the screen.
Select Stop / Start. (Figure A)
When the Configuration Successful box pops up, the programming
process is complete. (Figure C)
Continue to Installation


Produkt Specifikationer

Mærke: Axxess
Kategori: Ikke kategoriseret
Model: AXSSO-FD

Har du brug for hjælp?

Hvis du har brug for hjælp til Axxess AXSSO-FD stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Axxess Manualer

Axxess

Axxess AXDI-VW1 Manual

7 Oktober 2025
Axxess

Axxess AXBUCH-MZ6V Manual

7 Oktober 2025
Axxess

Axxess AXBUCH-T2 Manual

7 Oktober 2025
Axxess

Axxess AXTC-LN29 Manual

7 Oktober 2025
Axxess

Axxess AXSSO Manual

7 Oktober 2025
Axxess

Axxess AXDIS-MZ1 Manual

7 Oktober 2025
Axxess

Axxess LOC-GMH2 Manual

7 Oktober 2025
Axxess

Axxess AXSWC-TL Manual

7 Oktober 2025
Axxess

Axxess AXVI-9003 Manual

7 Oktober 2025
Axxess

Axxess AXDSPH-TY1 Manual

7 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer