BaByliss Hydro-Fusion Anti-Frizz 2100 5573U Manual

BaByliss Hårtørrer Hydro-Fusion Anti-Frizz 2100 5573U

Læs gratis den danske manual til BaByliss Hydro-Fusion Anti-Frizz 2100 5573U (8 sider) i kategorien Hårtørrer. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om BaByliss Hydro-Fusion Anti-Frizz 2100 5573U, eller vil du spørge andre brugere om produktet?

Side 1/8
HYDRO-FUSION 2100 HAIRDRYER
5573U
SAFETY CAUTIONS
Original instructions. Read these safety precautions
carefully before using the unit! This appliance should
only be used as described within this instruction
booklet. Please retain for future reference.
WARNING! THIS APPLIANCE GETS HOT!
ALWAYS keep out of reach of children (during and after
use and whilst cooling).
Always take extra care if used on children or near
children.
• Do not use on very young children
IMPORTANT SAFETY
UK Only: This appliance must not be used in the
bathroom.
Outside the UK: If using the appliance in a bathroom,
unplug after use as the proximity of water can be
dangerous even if the appliance is switched off. For
additional protection the installation of a residual current
device (RCD) with a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
WARNING! Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
Do not immerse the appliance into water or other liquids.
Never look directly into the barrel of the hairdryer when
it is switched on.
Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the
appliance has been dropped. In the event of damage,
discontinue use immediately. Contact the Conair
Customer Care Line (refer to UK After Sales Service’
section for further information).
Do not use the appliance if the lead is damaged. In
the event of damage, discontinue use immediately.
If the lead is damaged it must be replaced by the
manufacturer. Return the appliance to the Customer
Care Centre (refer to ‘UK After Sales Service’ section for
further information). No repair must be attempted by the
consumer.
Do not leave the appliance unattended when switched
on or plugged in.
This appliance is equipped with a safety thermostat. In
the event of overheating the appliance will either stop
automatically or run hot and cold intermittently. Should
this happen, switch the appliance to the ‘0 position,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear lter is clear of hair and other debris. Plug
in and switch on. If the appliance continues to overheat
discontinue use immediately, switch off and unplug, and


Produkt Specifikationer

Mærke: BaByliss
Kategori: Hårtørrer
Model: Hydro-Fusion Anti-Frizz 2100 5573U

Har du brug for hjælp?

Hvis du har brug for hjælp til BaByliss Hydro-Fusion Anti-Frizz 2100 5573U stil et spørgsmål nedenfor, og andre brugere vil svare dig