Bauhn AP5ODM-0224-W Manual

Bauhn Ikke kategoriseret AP5ODM-0224-W

Læs gratis den danske manual til Bauhn AP5ODM-0224-W (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Bauhn AP5ODM-0224-W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Product Overview

Troubleshooting

Have you got everything?

Unpack the box and make sure all

of these items are there:

Note: only one power board

(white/black) is supplied.

You will need a Philips head

screwdriver (not included) to

detach the desk clamp from

the power board.

User Guide

Model: AP5ODM-0224-W, AP5ODM-0224-B

5-Way Surge Protection Power Board

with Detachable Desk Clamp

A. 5-Way Surge Protection Power Board

with Detachable Desk Clamp

B. User Guide

C. Warranty Certicate

Power On/Off Switch

Press to supply/cut off power to the outlets.

Overload Circuit Breaker (Resettable)

Protects against current overload at 10 amps.

AC Sockets

All 5 sockets are the same protected sockets

and can be used interchangeably.

Detachable Desk Clamp

For mounting the power board on a desk with

a 15-50mm thickness.

USB-C and USB Charging Ports

For charging phones, tablets or other devices.

Surge Protected LED Indicator

When lit, the green light indicates that all

connected devices are surge protected.

Using The Detachable Desk Clamp

1. Position the desk clamp (B) on the edge of a table at

the desired location.

2. Twist the clamp lock (C) until the clamp stopper sits

ush against the bottom of the table. Ensure the

clamp is secure and not loose.

3. To detach the desk clamp from the power board, use

a Philips head screwdriver (not included) to unscrew

the 2 Philips head screws (D) on the back of the

clamp to detach the clamp from the power board.

Give us a call

What? You mean this User Guide didn’t have ALL the answers? Speak to us!

We’d love to help you get up and running as quickly as possible.

Call our on . After Sales Support 1300 002 534

Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST

No power

output from

one of the

sockets

• Try other sockets. If the other sockets have power output, it’s probably the

contact of one faulty socket that is loose or not connected; avoid using

that socket.

No power

output from

any of the

sockets

• Check that the power switch is turned on (you can try to turn it on and off

a few times to make sure it’s switched on) and that the Active Power LED

Indicator is lit green.

• Check the overload circuit breaker button to see whether it’s tripping, push

it down to reset the circuit breaker.

• Make sure the input socket for the power board has power output.

No output

from the USB

ports

• Check that the USB cable is connected securely to the USB port and/or try

a different USB port.

• The total output current for the USB ports are 4.5A. Remove devices using

the other USB ports.

• Use another USB cable.

Power board is

not turning on

• Check that there is no visible damage to the plug or cord.

• Ensure that the devices connected do not exceed the total maximum load

(2400W, 10A). If exceeded, unplug the devices and press the overload

reset button.

Well done, you made it.

Now sit back and relax... your power board is automatically

covered by a 1-year warranty.

How nice!

Enjoy using your power board!

Specications

Ratings

Input: 230-240Vac, 50Hz 10A

USB-C Output: 5V/3A MAX

USB-A Output: 5V/2.4A MAX

USB Output: total 5V/4.5A MAX

Total Loading Max. 2400W

Surge Protection

Maximum Energy 175J

USB Output DC 5V, 4.5A

Desk Clamp Thickness Suitable for desks 15-50mm thickness

Power Cable 1.5m

Net Weight 450g

Dimensions (W x H x D) 365 x 34 x 53 mm

GENERAL SAFETY WARNINGS

General Safety Warnings

For the safety of yourself and others, follow all instructions and take notice of all the warnings.

When adhered to, these safety precautions can reduce the risk of fire, electric shock and injury.

This product complies with Australian Safety standard AS/NZS 3105, AS/NZS 61558.2.16 to

ensure the safety of the product.

The RCM is a visible indication of a product’s compliance with all applicable ACMA

regulatory arrangements, including all technical and record-keeping requirements.

IMPORTANT

• Damage: If the power board or

cord is damaged, contact the After

Sales Support line for advice. Do not

attempt to open the board or replace

the cord. The cord must be replaced

by appropriately qualied personnel.

• Repair: If the power board requires

repair, contact the After Sales Support

line; never disassemble or modify the

power board or attempt to service it

yourself.

• Run the power supply cord in such

a way that there will be no risk of

anyone pulling it inadvertently or

tripping over it.

• If power supply cord is damaged, it

must be replaced by an authorised

service agent or similarly qualied

person to avoid a hazard.

• The power board is not intended for

use by persons (including children)

with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision or

instruction by a person responsible

for their safety.

• Young children should be supervised

to ensure they do not play with the

power board. Close supervision is

always necessary when any appliance

is used by or near children.

• The product is not suitable for use in

locations where children are likely to

be present.

• The surge power board is designed

for indoor use in dry places only.

• Do not exceed a maximum loading of

2400 watts.

• For safety reasons, always use earth

connections.

• Only use the power board with the

power supply cord fully unwound.

• Before installing the power board,

make sure to place it away from: heat

sources, radiators or other products

that produce heat; areas with high

temperatures, high humidity or direct

sunlight; excess dirt and dust; open

windows and any place where water

may get to the unit.

• Do not immerse the cord, plug or

the surge power board in water or

other liquid, or expose the electrical

connections to water or other liquid.

• Unpack the power board and keep

the original packaging carton and

materials in a safe place. It will help

prevent any damage if the power

board needs to be transported in the

future, and you can use it to store the

power board when it is not in use.

• The power board should always be

repacked in its original packaging

whenever transporting to prevent any

possible damage to the product.

• When not in use: Disconnect from

the power source and store in a cool,

dry and well ventilated location out

of direct sunlight, and not subject to

humidity.

• Warning: The socket outlet should

be located near the equipment and

should be easily accessible.

Responsible disposal of the product

At the end of its working life, do not throw

this product out with your household

rubbish. An environmentally friendly

method of disposal will ensure that

valuable raw materials can be recycled.

Contact your local authority for your

nearest recycling centre. Electrical and

electronic items contain materials and

substances which, if handled or disposed

of incorrectly, could potentially be

hazardous to the environment and human

health.

Responsible disposal of the packaging

The packaging of the product has been

selected from environmentally friendly

materials and can usually be recycled.

Please ensure these are disposed of

correctly. Plastic wrapping can be a

suffocation hazard for babies and young

children, please ensure all packaging

materials are out of reach and are safely

disposed of. Please ensure they are

offered for recycling rather than throwing

these materials away.

Cleaning the product

Only use a soft, dry cloth for cleaning the

product; do not use a damp cloth. Never

clean with industrial strength polish, wax,

benzene, paint thinner, air freshener,

lubricant, detergent or other chemicals.

Wipe off any moisture, dirt or dust on the

power sockets and plug pins with a clean,

dry cloth.

Produkt Specifikationer

Mærke:	Bauhn
Kategori:	Ikke kategoriseret
Model:	AP5ODM-0224-W

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauhn AP5ODM-0224-W stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Bauhn Manualer

Bauhn APBMC2-0225-3 Manual

30 Juli 2025

Bauhn ATAKMC2-0525 Manual

20 Juni 2025

Bauhn APBMC3-0325 Manual

8 April 2025

Bauhn APBMC1-0125 Manual

19 Februar 2025

Bauhn AWDCMC-0225 Manual

19 Februar 2025

Bauhn AP5ODM-0224-W Manual

20 Oktober 2024

Bauhn ABTWPDQ-0224 Manual

15 Oktober 2024

Bauhn AP5ODM-0224-B Manual

15 Oktober 2024

Bauhn ASWM65-0519 Manual

18 August 2024

Bauhn BS-26 Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025