Brother DCP-L1630W Manual

Brother Printer DCP-L1630W

Læs gratis den danske manual til Brother DCP-L1630W (2 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Brother DCP-L1630W, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Unpack the machine and check the components
Toner Cartridge
A5 Paper Long Edge
Support
Quick Setup Guide Product Safety Guide
1
Remove the packing materials and install the toner cartridge
2
Load paper in the paper tray
3
Back Front
NOTE:
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
If you use a wired connection, you must purchase the correct cable for
the interface you want to use.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
• Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The screens and images in this show the Quick Setup Guide
DCP-L1632W.
• Save all packing materials and the box in case you need to ship your
machine.
Drum Unit (Remove the drum unit)
Make sure the printing
surface is face up.
4
Select your country/language
(Initial setup only)
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.
Remove the protective tape or film covering the machine and the supplies.
Adjust the paper guides to fit the
paper being used.
For the long edge of A5 paper
Quick Setup Guide
Read the for the correct installation procedure.Product Safety Guide Quick Setup Guidefirst,thenreadthis
Not all models are available in all countries.
The latest manuals are available on the Brother support website:
support.brother.com/manuals
EN
DCP-L1630W / DCP-L1632W
D033J5001-00
OCE/ASA/SAF/GLF
Version 0
6
Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen
instructions and
prompts.
setup.brother.com
Setup Finished
You can now print and scan
using your machine.
Can’t Connect? Check the following:
Restart your wireless access point
or router. If this is not possible, go
to the next step.
Disconnect the cable.
Wired network
USB connection
If still unsuccessful, go to .
If still unsuccessful, visit support.brother.com
for FAQs and troubleshooting information.
Restart your machine and
computer, and then go to
.
7
Manual wireless setup (Wireless models)
Find your SSID (Network Name) and Network
Key (Password) on your wireless access
point or router and write them in the table
provided below.
SSID (Network Name)
Network Key (Password)
If you cannot find this information, ask your
network administrator or wireless access
point or router manufacturer.
SSID: XXXXXXX
Network Key: XXXX
Go to
to
install software.
If the setup is unsuccessful, restart your
Brother machine and your wireless access
point or router, and repeat
.
If still unsuccessful, visit
support.brother.com.
Press and hold (or press repeatedly)
▲or▼toselectoneofthefollowing
characters:
0123456789abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
(space)!"#$%&'()*+,-./:;<=>?@[\]^_‘{|}~
When the wireless setup is successful, the
LCD displays .[Connected]
Important Notice for Network Security:
The default password to manage this
machine’s settings is located on the back of
the machine and marked “ ”. Pwd
We recommend immediately changing the
default password to protect your machine from
unauthorised access.
If the wireless setup is unsuccessful, set up the connection manually.
Wireless network
Press , and then select Menu
[Network] >
[WLAN(Wi-Fi)] >
[Find Network].
Follow the LCD instructions.
Select the SSID (Network Name) for your
access point or router and enter the Network
Key (Password).
5
Select your language (if needed)
1. Press .Menu
2. Press▲or▼todisplay[Initial Setup], and then press .OK
3. Press▲or▼todisplay[Local Language], and then press .OK
4. Press▲or▼toselectyourlanguage,andthenpressOK.
5. Press .Stop/Exit
For detailed machine information and product specifications, see the at support.brother.com/manuals. © 2024 Brother Industries, Ltd. All rights reserved.Online User's Guide
D033J5001-00

Produkt Specifikationer

Mærke: Brother
Kategori: Printer
Model: DCP-L1630W

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother DCP-L1630W stil et spørgsmål nedenfor, og andre brugere vil svare dig


Printer Brother Manualer

Brother

Brother DCP-T535DW Manual

13 August 2025
Brother

Brother DCP-J1313DW Manual

12 August 2025
Brother

Brother MFC-J4555DW Manual

12 August 2025
Brother

Brother MFC-J4355DW Manual

12 August 2025
Brother

Brother DCP-J1460DW Manual

4 August 2025
Brother

Brother HL-L9310CDWTT Manual

2 August 2025
Brother

Brother MFC-7480D Manual

2 August 2025
Brother

Brother HL-2595DW Manual

1 August 2025
Brother

Brother MFC-L2827DW Manual

1 August 2025
Brother

Brother MFC-8535DN Manual

1 August 2025

Printer Manualer

Nyeste Printer Manualer

Utax

Utax 5059i Manual

13 August 2025
Lexmark

Lexmark MX622 Manual

13 August 2025
Utax

Utax 5058i Manual

13 August 2025
Utax

Utax P-4026w MFP Manual

13 August 2025
Utax

Utax P-4021DN Manual

13 August 2025
Utax

Utax P-3527w MFP Manual

13 August 2025
Godex

Godex GM620 Pro Manual

12 August 2025
Lexmark

Lexmark MC2425 Manual

12 August 2025
Star Micronics

Star Micronics mC-Label2 Manual

12 August 2025
HP

HP ENVY Inspire 7958e Manual

12 August 2025