Brother DCP-L1632W Manual

Brother Printer DCP-L1632W

Læs gratis den danske manual til Brother DCP-L1632W (2 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om Brother DCP-L1632W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Unpack the machine and check the components

Toner Cartridge A5 Paper Long Edge

Support

Quick Setup Guide Product Safety Guide

1Remove the packing materials and install the toner cartridge

2Load paper in the paper tray

3Connect the power cord and turn the machine on

Back Front

NOTE:

•The components included in the box may differ depending on your

country.

•The available connection interfaces vary depending on the model.

If you use a wired connection, you must purchase the correct cable for

the interface you want to use.

• USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no more

than 2 metres long.

• Network cable

Use a straight-through Category 5 (or greater) twisted-pair cable.

•The screens and images in this show the Quick Setup Guide

DCP-L1632W.

•Save all packing materials and the box in case you need to ship your

machine.

Drum Unit (Remove the drum unit)

Make sure the printing

surface is face up.

4Select your country/language

(Initial setup only)

After turning the machine on, you may be required

to set your country or language (depending on your

machine).

If required, follow the on-screen instructions.

Remove the protective tape or film covering the machine and the supplies.

Adjust the paper guides to fit the

paper being used.

For the long edge of A5 paper

Quick Setup Guide

Read the for the correct installation procedure.Product Safety Guide Quick Setup Guideﬁrst,thenreadthis

Not all models are available in all countries.

The latest manuals are available on the Brother support website:

support.brother.com/manuals

DCP-L1630W / DCP-L1632W

D033J5001-00

OCE/ASA/SAF/GLF

Version 0

6Connect your computer or mobile device to your machine

Follow these steps to complete the setup using one of the connection types available on your machine.

Visit setup.brother.com to download and install

Brother software.

Follow the on-screen

instructions and

prompts.

setup.brother.com

Setup Finished

You can now print and scan

using your machine.

Can’t Connect? Check the following:

Restart your wireless access point

or router. If this is not possible, go

to the next step.

Disconnect the cable.

Wired network

USB connection

If still unsuccessful, go to .

If still unsuccessful, visit support.brother.com

for FAQs and troubleshooting information.

Restart your machine and

computer, and then go to .

7Manual wireless setup (Wireless models)

Find your SSID (Network Name) and Network

Key (Password) on your wireless access

point or router and write them in the table

provided below.

SSID (Network Name)

Network Key (Password)

If you cannot find this information, ask your

network administrator or wireless access

point or router manufacturer.

SSID: XXXXXXX

Network Key: XXXX

Go to to

install software.

If the setup is unsuccessful, restart your

Brother machine and your wireless access

point or router, and repeat .

If still unsuccessful, visit

support.brother.com.

Press and hold (or press repeatedly)

▲or▼toselectoneofthefollowing

characters:

0123456789abcdefghijklmnopqrstuvwxyz

ABCDEFGHIJKLMNOPQRSTUVWXYZ

(space)!"#$%&'()*+,-./:;<=>?@[\]^_‘{|}~

When the wireless setup is successful, the

LCD displays .[Connected]

Important Notice for Network Security:

The default password to manage this

machine’s settings is located on the back of

the machine and marked “ ”. Pwd

We recommend immediately changing the

default password to protect your machine from

unauthorised access.

If the wireless setup is unsuccessful, set up the connection manually.

Wireless network

Press , and then select Menu

[Network] >

[WLAN(Wi-Fi)] >

[Find Network].

Follow the LCD instructions.

Select the SSID (Network Name) for your

access point or router and enter the Network

Key (Password).

Select your language (if needed)

1. Press .Menu

2. Press▲or▼todisplay[Initial Setup], and then press .OK

3. Press▲or▼todisplay[Local Language], and then press .OK

4. Press▲or▼toselectyourlanguage,andthenpressOK.

5. Press .Stop/Exit

D033J5001-00

Produkt Specifikationer

Mærke:	Brother
Kategori:	Printer
Model:	DCP-L1632W

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother DCP-L1632W stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Brother Manualer

Brother DCP-7080D Manual

1 August 2025

Brother MFC-7895DW Manual

1 August 2025

Brother MFC-1819 Manual

1 August 2025

Brother DCP-7195DW Manual

1 August 2025

Brother DCP-9030CDN Manual

1 August 2025

Brother HL-L2442DW Manual

1 August 2025

Brother DCP-L2627DW Manual

1 August 2025

Brother HL-2140R Manual

1 August 2025

Brother MFC-L9610CD Manual

1 August 2025

Brother PocketJet PJ-722 Manual

1 August 2025

Printer Manualer

Nyeste Printer Manualer

Pantum BM270ADN Manual

1 August 2025

Epson LQ-690IIN Manual

31 Juli 2025

Utax P-3525 MFP Manual

30 Juli 2025

Ricoh IM C4510A Manual

30 Juli 2025

Utax 5009ci Manual

30 Juli 2025

Utax P-5030DN Manual

30 Juli 2025

Utax P-4030 MFP Manual

30 Juli 2025

Utax P-6035i MFP Manual

30 Juli 2025

Utax 3060i Manual

30 Juli 2025

Utax P-C2660DN Manual

30 Juli 2025