Brother DCP-T436W Manual

Brother Printer DCP-T436W

Læs gratis den danske manual til Brother DCP-T436W (4 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Brother DCP-T436W, eller vil du spørge andre brugere om produktet?

Side 1/4
1
EN
Quick Setup Guide
DCP-T230 / DCP-T236 / DCP-T430W / DCP-T435W / DCP-T436W D034MK001-00
ASA/SAF
Version 0
The latest manuals are available at the Brother
support website: support.brother.com/manuals
Continue to the next column
Read the Product Safety Guide rst, then read this Quick Setup Guide for the correct installation procedure.
aUnpack the machine and
check the components
Remove the protective tape and the film covering
the machine.
bLoad plain A4 paper in the
paper tray
If you selected [[4-B] Set up from the control panel on the machine] in the printed Quick Setup
Guide included with the machine, go to [4-B].
NOTE
The illustrations in this guide may not match your model
exactly, but the steps are the same for each model.
The components may differ depending on your country.
Save all packing materials and the box in case you need to
ship your machine.
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long (included in some countries).
2
1
2
Continue to the next column
cConnect the power cord
The machine powers on automatically and the
Power LED is flashing.
dChoose your setup method
When the Power LED starts flashing slowly, press
and hold the Mono Copy button for three
seconds.
Confirm that the Power LED is lit and the Ink LED
is flashing, and then proceed to the next step.
Choose your setup method below.
To complete both the setup and the
connection settings with your device at
the same time, follow the instructions in
[4-A].
To set up your machine using a Mac,
follow the instructions in section [4-B].
Set up using mobile app or computer software
(recommended)
Set up from the control panel on the machine
4-A
4-B
Set up using mobile app or
computer software
(To set up your machine using a Mac, follow the
instructions in section [4-B].)
Go to the website applicable to your setup method:
(DCP-T230/DCP-T236) Choose Set up with your
computer.
NOTE
Even after the setup is complete, you can also use your
machine on another device by installing the software on
that device.
Set up from the control panel
on the machine
Recommended
4-A
Set up with your mobile device
* The mobile device must be connected to Wi-Fi®.
setup.brother.com
Set up with your computer
setup.brother.com
4-B


Produkt Specifikationer

Mærke: Brother
Kategori: Printer
Model: DCP-T436W

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother DCP-T436W stil et spørgsmål nedenfor, og andre brugere vil svare dig