Brother MFC-J6740DW Manual

Brother Printer MFC-J6740DW

Læs gratis den danske manual til Brother MFC-J6740DW (2 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Brother MFC-J6740DW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Setup Guide

Read the Product Safety Guide Quick Setup Guide ﬁrst, then read this for the correct installation procedure.

D01YPU001-00

OCE/ASA/SAF/GLF

Version 0

1Unpack the machine and check the components

Remove the protective tape or film covering the machine and the supplies. The components included in the box may differ depending on your country.

MFC-J3540DW / MFC-J3940DW / MFC-J6540DW / MFC-J6555DW

MFC-J6740DW / MFC-J6940DW / MFC-J6955DW / MFC-J6957DW

NOTE

• Save all packing materials and the box in case you must ship your machine.

• You must purchase the correct interface cable for the interface you want to use.

USB cable

Use a USB 2.0 cable (Type A/B) that is no more than 5 metres long.

Ethernet (Network) cable

Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or

100BASE-TX Fast Ethernet Network.

NOTE

You can adjust the control panel

angle to read the LCD more easily.

NOTE

The first time you install a set

of ink cartridges the machine

will use an amount of ink to fill

the ink delivery tubes for high

quality printouts. This process

will only happen once.

Open the ink cartridge cover.

MFC-J3540DW / MFC-J3940DW / MFC-J6540DW / MFC-J6740DW /

MFC-J6940DW:

Remove the orange protective part from the machine. Follow

the LCD instructions to store the orange protective part inside

the machine. If you must transport the machine, remove the ink

cartridges and replace this part.

The latest manuals are available at the Brother support website:

support.brother.com/manuals

Video setup instructions:

support.brother.com/videos

Pull the paper tray completely

out of the machine as shown

by the arrow.

Fan the paper well. Load the paper in the tray

and adjust the paper guides.

Slowly push the paper tray

completely into the machine.

Pull out the paper support until

it locks into place.

Quickly shake just the

black ink cartridge

horizontally 15 times as

shown, before inserting

it into the machine.

Follow the LCD instructions

to install the ink cartridges.

Close the ink cartridge

cover. The machine will

prepare the ink tube

system for printing.

Follow the LCD instructions to set

the date and time.

After setting the date and time, you

can set the Brother LCD Message

defaults.

Follow the LCD instructions,

and then press . [Start]

The machine prints the Print

Quality Check Sheet.

Follow the LCD instructions and

check the quality of the four

colour blocks on the sheet, and

then start the cleaning procedure

if required.

Follow the LCD instructions

to print the Adjustment

Sheet. The black circle mark

is located in the upper right

corner of the sheet.

Place the Adjustment Sheet

face down on the scanner

glass. Make sure the black

circle is in the upper left corner

of the scanner glass.

Follow the LCD instructions

and complete adjusting the

alignment.

When finished, remove the

Adjustment Sheet from the

scanner glass.

After finishing the machine setup, you can change the paper type or size. For more information

about paper handling, see the Online User’s Guide at support.brother.com/manuals.

2Load plain A4 paper

5Install the inbox ink cartridges

3Connect the power cord

7Check the print quality 8Adjust the print alignment (recommended)

To adjust the print alignment before using your machine, press .[Start]

6Set the date and

time

• Most of the machine illustrations in this show the MFC-J6940DW.Quick Setup Guide

• The images in this guide are for illustration purposes only and may differ from the

actual products.

Do not exceed

this mark ( ).bbb

4Select your country or language

After turning the machine on, you may need to set your country or language (depending on

your machine). If required, follow the LCD instructions.

OK Poor

Can’t Connect? Check the following:

Wireless network

Wired network

USB connection

Restart your wireless access point/

router (if possible). If still not successful, go to 13 .

Disconnect the cable. If still not successful, visit support.brother.com

for FAQs and Troubleshooting.

Restart your machine and

computer, and then go to 12 .

Follow the LCD instructions to configure the machine settings.

• Configure the tray settings and check the paper orientation information (not

available on all models).

• Check the software installation information.

1. Press > > [Settings] [All Settings] [Initial Setup]

> [Local Language].

2. Press your language.

3. Press .

Visit setup.brother.com to download and install

Brother software.

Follow the on-screen instructions and prompts.

NOTE

For Wired Network Connection and USB Connection,

locate the correct port (based on the cable you are using)

inside the machine as shown.

Setup Finished

You can now print and scan using your machine.

To check for the latest firmware, visit

support.brother.com/up7.

Find your SSID (Network Name) and Network Key

(Password) on your wireless access point/router

and write them in the table provided below.

SSID (Network Name)

Network Key (Password)

Go to your machine,

and press

[Find Wi-Fi Network] >

[Yes].

Go to 12 to install software.

SSID: XXXXXXX

Network Key: XXXX

If you cannot find this information, ask your network

administrator or wireless access point/router

manufacturer.

If setup is not successful, restart

your Brother machine and your

wireless access point/router, and

repeat 13 .

Important Notice for Network Security:

The default password to manage this machine’s

settings is located on the back of the machine

and marked “ ”. We recommend immediately Pwd

changing the default password to protect your

machine from unauthorised access.

For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals.

13 Manual wireless setup

If the wireless setup is not successful, try to set up the connection manually.

12 Connect your computer or mobile device to your machine

Follow these steps to complete the setup using one of the connection types available on your machine.

11 Connect the telephone line cord

If you are not using your machine as a fax, go to 12 . For more information on using the fax feature, see the Online User’s Guide.

10 Select your language (if needed)

9Machine settings

setup.brother.com

Select the SSID (Network

Name) for your access point/

router and enter the Network Key

(Password).

When the wireless setup is

successful, the LCD displays

[Connected].

Lift the scanner cover. Close the scanner cover.

Connect the telephone line cord. Use the socket

marked LINE and guide the cord out the back of the

machine.

D01YPU001-00

NOTE

For Windows only, CD installation is also available (for

some countries).

(Example for Australia)

Produkt Specifikationer

Mærke:	Brother
Kategori:	Printer
Model:	MFC-J6740DW
Vekselstrømsindgangsspænding:	220 - 240 V
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	575 mm
Dybde:	477 mm
Højde:	374.5 mm
Vægt:	23400 g
Produktfarve:	Black, White
Kontroltype:	Berøring
Indbygget skærm:	Ja
Wi-Fi:	Ja
USB-port:	Ja
Ethernet LAN:	Ja
Wi-Fi-standarder:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Driftstemperatur (T-T):	10 - 35 °C
Udskrivningsteknologi:	Inkjet
Maksimal opløsning:	1200 x 4800 dpi
Udskrivningshastighed (ISO/IEC 24734) mono:	28 ipm
Udskrivningshastighed (ISO/IEC 24734) farve:	28 ipm
Udskrivningshastighed (sort, normal kvalitet, A4/amerikansk papirformat):	- sider pr. minut
Udskrivning:	Farveudskrivning
Medietyper til papirbakke:	Envelopes, Plain paper, Postcard, Recycled paper
Maksimal ISO A-serie papirstørrelse:	A3
ISO A-serie, størrelser (A0...A9):	A3, A4, A5, A6
Ikke-ISO udskriftsmedier størrelse:	Legal (media size), Letter (media size)
Kuverter størrelser:	C5, Com-10, DL
Medievægt på papirbakke:	64 - 220 g/m²
Samlet antal inputbakker:	1
Samlet inputkapacitet:	250 ark
Samlet outputkapacitet:	100 ark
Scanner type:	ADF-scanner
Scanningsteknologi:	CIS
Optisk scanningsopløsning:	600 x 600 dpi
Input gråtoneskala dybde:	16 Bit
Output gråtoneskala dybde:	8 Bit
Input farvedybde:	48 Bit
Output farvedybde:	24 Bit
Scanning:	Farvescanning
Kopiering:	Farvekopiering
Maksimal kopiopløsning:	600 x 600 dpi
Maksimalt antal kopier:	999 Kopier
Ethernet LAN-datahastigheder:	10, 100 Mbit/s
Sikkerhedsalgoritmer:	64-bit WEP, 128-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-AES, WPA2-PSK, WPA2-TKIP, WPA3-SAE
Mobile udskrivningsteknologier:	Apple AirPrint, Mopria Print Service
Markedspositionering:	Forretning
Strømforbrug (slukket):	0.03 W
Strømforbrug (kopiering):	29 W
Maksimal driftscyklus:	- sider pr. måned
Udskrivning af farver:	Black, Cyan, Magenta, Yellow
Fax:	Farvefax
Intern hukommelse:	256 MB
Modemhastighed:	33.6 Kbit/s
Fax-hukommelse:	150 Sider
Duplex udskrivning:	Ja
Duplex-funktioner:	Udskriv
Tid til første side (farve, normal):	4.6 sek./side
Understøttede Windows-operativsystemer:	Windows 10, Windows 7, Windows 8, Windows 8.1
Farveskærm:	Ja
Tid til første side (sort, normal):	4.4 sek./side
Ændre størrelse på kopimaskine:	25 - 400 %
Anbefalet arbejdscyklus:	250 - 2500 sider pr. måned
Strømforbrug (dvale):	0.9 W
Scan til:	E-mail Server, File
N-i-1 kopifunktion:	Ja
N-i-1 kopifunktion (N =):	2, 4
Automatisk dokumentføder (ADF) indgangskapacitet:	50 ark
Fejlkorrektionstilstand (ECM):	Ja
Strømforbrug (klar):	5 W
Udskrivning af vandmærke:	Ja
Automatisk reduktion:	Ja
Automatisk dokumentføder (ADF):	Ja
Funktion til udskrivning af foldere:	Ja