Brother RJ-3150Ai Manual

Brother Printer RJ-3150Ai

Læs gratis den danske manual til Brother RJ-3150Ai (4 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Brother RJ-3150Ai, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Check that the package contains the following before using the printer.
Installing the Rechargeable Li-ion Battery
1.
1.
1.
1.1. Make sure that the battery latch is lifted up, and then insert the battery
into the battery compartment with the battery cover attached to the
battery. Make sure that the terminal end of the battery is facing inward.
2.
2.
2.
2.2. With the battery inserted and while pushing the battery lightly into the
cavity, lower the battery latch until it clicks locking the battery in place.
Removing the Rechargeable Li-ion Battery
While pushing the battery lightly, lift the battery latch to unlock the battery, and
then remove the battery.
On: Press and hold the (Power) button until the LCD display turns on.
Off: Press and hold the (Power) button until the message “System Off” is
displayed on the LCD display.
1.
1.
1.
1.1. Make sure that the rechargeable Li-ion battery is installed in the printer.
2.
2.
2.
2.2. Use the AC adapter and AC power cord to connect the printer to an AC
power outlet (see Connecting to an AC Power Outlet (Optional)), or use
the car adapter to connect the printer to a DC power outlet (see
Connecting to a DC Power Outlet (Optional)).
3.
3.
3.
3.3. The battery indicator light is orange when the battery is charging.
When the rechargeable Li-ion battery is fully charged, the battery
indicator light turns off. Disconnect the AC adapter or car adapter from
the battery’s DC connector.
For details, see the Online User’s Guide.
Connecting to an AC Power Outlet (Optional)
Connect the printer to a nearby AC power outlet to charge the rechargeable
battery.
1.
1.
1.
1.1. Connect the AC adapter to the printer.
2.
2.
2.
2.2. Connect the AC power cord to the AC adapter.
3.
3.
3.
3.3. Connect the AC power cord to a nearby AC power outlet (100 -
240 VAC, 50 - 60 Hz).
Unpacking the RJ-3150/3150Ai
Printer Rechargeable Li-
ion Battery
Belt clip
User’s Guide Product Safety
Guide
Clock battery Phillips screw
General Description
1 Battery compartment
2 Battery latch
3 USB host port
4 Mini-USB port
5 DC connector
6 Cover open lever
7 Peeler latch
8 RD Roll compartment cover
9 Paper outlet
10 Label peeler
11 LCD
12 BATT (Battery) indicator
13 (Power) button
(To turn the printer on/off)
14 CANCEL button
15 Cursor button (UP/DOWN)
16 OK button
17 Menu button
18 (Feed) button
(To feed the paper or print the
printer settings)
English
Español
Thank you for purchasing the Brother RuggedJet RJ-3150/3150Ai mobile printer.
Read the included User’s Guide and Product Safety Guide, before using the
printer. For detailed operation instructions, see the Online User's Guide (Brother
Solutions Center at support.brother.com ). We suggest that you keep these
documents in a handy place for future reference. To download the latest
manuals, please visit the Brother Solutions Center (support.brother.com ),
where you can also download the latest drivers and utilities for your printer, read
FAQs and troubleshooting tips or learn about special printing solutions.
Printed in China
D00HXP001
RJ-3150/3150Ai
User’s Guide
1
3
2
45
67
89
10
11
13
14
15
17
12
18
16
Using the Rechargeable Li-ion Battery
Turning the Printer On or Off
NOTE
Do NOT remove the battery or power to turn off the printer until the LCD
display turns off.
Recharging the Li-ion Battery
1 AC adapter
2 AC power cord
1
2
Connecting to a DC Power Outlet (Optional)
Connect the printer to your vehicle’s 12 V DC power outlet (cigarette lighter,
etc.) to charge the rechargeable battery.
1.
1.
1.
1.1. Connect the car adapter to the vehicle’s 12 V DC power outlet.
2.
2.
2.
2.2. Connect the car adapter to the printer.
1.
1.
1.
1.1. Open the battery cover using a cross point screwdriver.
2.
2.
2.
2.2. Insert the supplied battery into the space for the battery, making sure
that the battery is level and its positive side is facing up.
3.
3.
3.
3.3. Close the battery cover using a cross point screwdriver.
Press the [Menu], [a], or [b] button to select the [Administration] menu, and
then press the [OK] button. The default password is "1111".
Select [#Language] , and then press the [OK] button. Select a language, and
then press the [OK] button.
1.
1.
1.
1.1. Install the printer driver and software downloaded from the web page.
(See Installing the Drivers section.)
2.
2.
2.
2.2. Make sure that the printer is powered using a charged battery.
3.
3.
3.
3.3. Turn the printer on.
4.
4.
4.
4.4. Connect the printer to a computer or handheld device using either a
USB cable, Bluetooth, or Wi-Fi.
5.
5.
5.
5.5. Insert the RD Roll.
6.
6.
6.
6.6. Print receipts or labels.
For details, see the Online User’s Guide.
When Not Using the Label Peeler
1.
1.
1.
1.1. Push the cover open lever to open the RD Roll compartment cover.
2.
2.
2.
2.2. Open the roll guides by lifting up the roll guide adjustment lever (1) and
pulling the roll guide outwards.
Insert an RD Roll into the RD Roll compartment with the roll feeding
from the bottom as shown.
3.
3.
3.
3.3. While lifting up the roll guide adjustment lever (1), push in both roll
guides (2) to the roll width. Insert the RD Roll so that it is positioned
straight in the RD Roll compartment.
4.
4.
4.
4.4. Close the RD Roll compartment by pressing down on the center of the
cover until it latches.
When Using the Label Peeler
1.
1.
1.
1.1. Push the cover open lever to open the RD Roll compartment cover.
2.
2.
2.
2.2. Push both sides of the label peeler towards the rear of the printer. The
peeler will move up and away from the printer.
Then, fully pull out the peeler away from the printer until the marks
on the peeler are visible as shown.
1 Car adapter
NOTE
A battery charger (option) and cradle (option) can also be used for
charging.
Installing the Clock Battery
Setting the Language of the LCD Display
Printing Receipts or Labels
1
Inserting the RD Roll
NOTE
You can also view information about loading
paper in Help.
While the printer is turned on, open the RD Roll
compartment cover, and press the [Menu] button
on the printer.
1 cover open lever
• You can also view information about setting
the label peeler and loading paper in Help.
While the printer is turned on, open the RD
Roll compartment cover, and press the
[Menu] button on the printer.
• A video on setting up the label peeler is
available at the following address.
http://solutions.brother.com/movie/d532/
1
2
1
1
2

Produkt Specifikationer

Mærke: Brother
Kategori: Printer
Model: RJ-3150Ai

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother RJ-3150Ai stil et spørgsmål nedenfor, og andre brugere vil svare dig


Printer Brother Manualer

Brother

Brother DCP-J1313DW Manual

12 August 2025
Brother

Brother MFC-J4555DW Manual

12 August 2025
Brother

Brother MFC-J4355DW Manual

12 August 2025
Brother

Brother DCP-J1460DW Manual

4 August 2025
Brother

Brother HL-L9310CDWTT Manual

2 August 2025
Brother

Brother MFC-7480D Manual

2 August 2025
Brother

Brother HL-2595DW Manual

1 August 2025
Brother

Brother MFC-L2827DW Manual

1 August 2025
Brother

Brother MFC-8535DN Manual

1 August 2025
Brother

Brother HL-L6310DW Manual

1 August 2025

Printer Manualer

Nyeste Printer Manualer

Utax

Utax P-3527w MFP Manual

13 August 2025
Godex

Godex GM620 Pro Manual

12 August 2025
Lexmark

Lexmark MC2425 Manual

12 August 2025
Star Micronics

Star Micronics mC-Label2 Manual

12 August 2025
HP

HP ENVY Inspire 7958e Manual

12 August 2025
Epson

Epson WorkForce Enterprise AM-M5500 Manual

12 August 2025
Samsung

Samsung CLP-610 Manual

10 August 2025
Samsung

Samsung ML-1860 Manual

10 August 2025
Samsung

Samsung SCX-4725 Manual

10 August 2025
Samsung

Samsung CLP-775 Manual

10 August 2025