CE Labs HA8-4 Manual

CE Labs Modtager HA8-4

Læs gratis den danske manual til CE Labs HA8-4 (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om CE Labs HA8-4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
HDMI Distribution
Amplifier
HA8-4
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
re and Media Players• Digital Signage softwa
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
A• C T 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
Document: HA8-4_Manual.pdf
900-2210-10_Rev.A
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
Integrated patented HCRS (HDMI Cable Retention System.)
Prevents accidental disconnectrs and service calls.
PanelLink digital technology
Supports HDTV esolutions 480i, 480r P, 720P, 1080i, & 1080P, 3D
Cascadable for larger display systems.
Heavy duty metal housing. Comme
LED indicators for activity and resolution
rcial duty rated.
LAUNAM NOITCURTSNI
Pin # Signal Pin # Signal
1 TMDS Data 2+ 11 TMDS Clock Shield
2 TMDS Data 2 Shield 12 TMDS Clock -
3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14 Reserved (N.C )
5 TMDS Data 1 Shield 15 SCL
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ 17 DDC/CEC Ground
8 TMDS Data 0 Shield 18 +5 Power
9 TMDS Data 0- 19 Hot Plug Detect
10 TMDS Clock+
NOTES:
1. All monitors connected to the distribution amplifier should be capable of the same resolution.
2. Always connect the first monitor to output number one on the Distribution Amplifier first.
This is necessary for the Electronic ID to be read properly by the source.
3. For optimum performance try to use HDMI cables no longer than 5 meters in length.
1. Turn off the devices to be connected together.
2. Connect the HDMI cable between the source (DVD, Satellite Receiver, etc.)
and the “HDMI In” port of the Distribution Amplifier.
3. Connect the HDMI cables from the outputs of the distribution amplifier to the
inputs of the monitors.
4. Power up the Distribution Amplifier and the Monitor connected to HDMI
output number one on the amplifier.
Leave the other monitors off for now.
5.Turn on power to the source device. The monitor connected to output
number one should have picture and sound within about 5 seconds.
6. Turn on power to the remaining monitors.
7. Install cable ties through the two holes on either side of the cable if desired to
prevent accidental unplugginf of the HDMI cables. See picture above.
12
34
56 Input78
DC IN
HDMI SOURCE OUT 1
HDMI Distribution Amplifiers Cascade Configuration
SPECIFICATIONS
12
34
56 Input
78
DC IN
12
34
56 Input
78
DC IN
HA8 -4 Units may be cascaded 7 layers deep.
HD MONITOR
#1
HA 8-4 HD MONITOR
#7
HD MONITOR
#8
HD MONITOR
#14
HD MONITOR
#15
HD MONITOR
#21
l Mode HA8-4
)Input HDMI Connector (A-Type Female 1
)Output HDMI Connector (A-Type Female 8
Max. Resolution 1080P
Cable Distance 10 m (Max.)
Signal ypeT HDMI V1.4 compliant
Power Adapter (Min.) DC 5V 4A
Housing Metal
Weight (3.5 lbs.) 1.5 Kg
Dimensions (LxWxH) mm 15” x 1.5” x 6.8”
Deep Color 12 bit
Full 3D Support
HA 8-4
HA 8-4
INSTALLATION/OPERATION INSTRUCTIONS
Use these holes to
secure the HDMI
cables with a
cable tie.
Note: The RJ-45 jack is for service only. This unit does not support
Ethernet or ARC.

Produkt Specifikationer

Mærke: CE Labs
Kategori: Modtager
Model: HA8-4

Har du brug for hjælp?

Hvis du har brug for hjælp til CE Labs HA8-4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager CE Labs Manualer

CE Labs

CE Labs HA8-4K Manual

16 August 2024
CE Labs

CE Labs HA8-4 Manual

13 August 2024

Modtager Manualer

Nyeste Modtager Manualer

CYP

CYP AU-A220 Manual

30 Juli 2025
Sirus

Sirus I-Amp 8.150T Manual

30 Juli 2025
AER

AER Colourizer 2 Manual

30 Juli 2025
Sirus

Sirus I-Amp 1.300T Manual

30 Juli 2025
PAC

PAC AP4-FD32 Manual

30 Juli 2025
CYP

CYP PUV-1540S-RX Manual

30 Juli 2025
ART

ART USB Dual Pre Manual

29 Juli 2025
SSL

SSL Pure Drive Quad Manual

29 Juli 2025
SSL

SSL Pure Drive Octo Manual

29 Juli 2025
CYP

CYP PUV-1550SRX Manual

29 Juli 2025