Chamberlain 2025P Manual


Læs gratis den danske manual til Chamberlain 2025P (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Chamberlain 2025P, eller vil du spørge andre brugere om produktet?

Side 1/1
4261 S. Country Club Road Tucson, AZ 85714
1.800.866.9115 (Toll Free) 1.520.881.3380 (P) 1.520.320.1820 (F) ▲ ▲
www.guardiangatehardware.com sales@guardiangatehardware.com
GUARDIAN Gate Hinges
Weld On Installation & Maintenance Instructions
INSTALLATION:
GUARDIAN gate hinges are to be mounted with the yoke (FIG. 1) welded to the gate and the
channel welded to the post. The hinges must be installed with the hinge pins in a straight line.
Reference sales literature for hinge capacities or contact Guardian Gate Hardware for technical
support. Weld only on the vertical portions of the yoke and plate. DO NOT weld the top and
bottom of the hinges. Bolt on versions of this hinge are available.
MAINTENANCE:
A regular maintenance schedule is important for the efficacy and durability of any gate system.
This GUARDIAN gate hinge is equipped with a grease zerk (FIG 3) for easy lubrication. One
pump of a high quality, multi purpose grease every 3 months should be sufficient under normal
operating conditions. More frequent maintenance is necessary under severe operating conditions.
Do not over lubricate.


Produkt Specifikationer

Mærke: Chamberlain
Kategori: Ikke kategoriseret
Model: 2025P

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain 2025P stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Chamberlain Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer