Chimera F2X Manual

Chimera Lys F2X

Læs gratis den danske manual til Chimera F2X (5 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Chimera F2X, eller vil du spørge andre brugere om produktet?

Side 1/5
1
Outline - F2X Assembly Instructions
Basic Information
Layout the parts, grouping by color codes. Poles are bundled in specific groups for your
convenience.
Align tubes carefully as to not cross thread. Laying on the floor or a flat surface is helpful. Do not
force if you encounter undue resistance.
Start the first bay on one side, and then complete the opposite side, working a bay at a time, adding
top perimeter tubes as you go - bay by bay.
Position all the cross tubes tabs on the same side of the uprights, either all to left of all to right
throughout, except as noted for the ends . Slide all tabbed parts over the threads carefully. (1)
-It is recommended to pre assemble all cross tubes, including the light support assemblies (adjusting
and locking the light tub for efficiency.e angles (2)
Refer to the drawings for further instructions.
It is recommended to lubricate the threads occasionally with Dry Slide Teflon Powder for easier
assembly.
Swivel tube Tabs. Each cross d have a tube, when assembled, shoul stationary tab on one end and a
swivel tab on the other end. This allows the tabs to be properly aligned during frame assembly. Tube
components that have the swivel tabs are identified by a stripe of red tape on the tab end . (3)
(1)
salesinfo@chimeralighting.com
www.chimeralighting.com
1812 Valtec Lane
Boulder, Colorado 80301
Phone: (303) 444- 8000
Fax: (303) 444- 8303
Toll Free: (888) 444- 1812


Produkt Specifikationer

Mærke: Chimera
Kategori: Lys
Model: F2X

Har du brug for hjælp?

Hvis du har brug for hjælp til Chimera F2X stil et spørgsmål nedenfor, og andre brugere vil svare dig