Coast PolySteel 400 Manual

Coast Lommelygte PolySteel 400

Læs gratis den danske manual til Coast PolySteel 400 (1 sider) i kategorien Lommelygte. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Coast PolySteel 400, eller vil du spørge andre brugere om produktet?

Side 1/1
POLYSTEEL 400 INSTRUCTIONS:
BATTERY INSTALLATION:
Turn the tail cap in a counter clock wise dir ectio n to remove t he cap.
Remove the battery car tridge.
Place four AA A batteries into the cartridge in the direction indicated in
the center of the cartridge.
Replace the cartridge in the light in the direction indicated by the arrow
on the cartridge.
Replace the tail cap and turn it clockwise to tighten it until it is com-
pletely closed.
pre-installed.
QUICK CYCLE SWITCH OPERATION:
This flashlight is equipped with COAST’s Quick-Cycle Switch, featuring
high, medium and low beams.
To activate the high mode from the off position, press the on/off switch
until it clicks once, then releases. Press the on/off switch until it clicks a
second time to turn off the light.
To activate the medium mode, press the on/off switch until it clicks a
third time, then release. Press the on/off switch until it clicks a fourth
time to turn off the light.
To activate the low mode, press the on/off switch until it clicks a fth
time, then release. Press the on/off switch until it clicks a sixth time
to turn off the light.
The light can also be operated in “momentary” mode. Momentary mode
is activated by partially depressing the on/off switch (less pressure
than required for a full click). The momentary switch will cycle the light
through the high and low beam modes.
Any time the light is turned off for more than ve seconds, the high/
medium/low cycle will reset, and the high beam will be activated when
the light is turned back on.
PURE BEAM FOCUSING OPTIC:
This flashlight is equipped with COAST’s Pure Beam Focusing Optic that
allows the user to choose between a broad flood beam and a focused
Bulls-Eye Spot beam for long distance illumination.
To adjust the beam into the Bulls-Eye Spot mode, turn the front bezel
of the light clockwise.
To change the beam into the flood light mode, turn the front bezel of the
light counterclockwise.
MAINTENANCE:
The POLYSTEEL 400 is rated IPX8 and submersible to 3 meters for 6
hours. Wipe the external body with a cloth moistened with water or
isopropyl.
POLYSTEEL 400
16-595v01N 1606A
For warranty and distributor information in
your country, visit: www.COASTportland.com


Produkt Specifikationer

Mærke: Coast
Kategori: Lommelygte
Model: PolySteel 400

Har du brug for hjælp?

Hvis du har brug for hjælp til Coast PolySteel 400 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lommelygte Coast Manualer

Coast

Coast PX1 Manual

18 Juli 2025
Coast

Coast HP4 Manual

3 Januar 2025
Coast

Coast G23 Manual

17 December 2024
Coast

Coast G19 Manual

2 September 2024

Lommelygte Manualer

Nyeste Lommelygte Manualer