Columbus P-7 Pro Manual


Læs gratis den danske manual til Columbus P-7 Pro (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Columbus P-7 Pro, eller vil du spørge andre brugere om produktet?

Side 1/3
Power on: Always on
Parts Description
Power Lamp Bluetooth Lamp
1 2
CAUTION
GB
The protection class of the external active antenna is IP66,
which can work normally in all-weather environments such as
rain, snow and high dust, but do not immerse the antenna
completely in water. The main unit of the P-7 Pro is not
waterproof.
As a precision electronics, the product contains no component
that can be repaired by your own. Any attempt to disassemble
the product will void the original manufacturer's warranty.
Thank you for choosing our product.
This manual is intended to guide you through the safe and
correct use of the product and its accessories, avoiding improper
operations that may result in injury of yourself or any other
person or cause device damage.
Disconnected: off
Connected: always on
Bluetooth LampPower Lamp
SMA ( )Connector Female
SMA Connector (Male)
USB Type-A Connector
External Active Antenna
(Magnetic Mount)
Pr
Pr
Pr
PrPro
o
o
oof
f
f
ffe
e
e
ees
s
s
sss
s
s
ssi
i
i
iio
o
o
oon
n
n
nna
a
a
aal H
l H
l H
l Hl HD G
D G
D G
D GD GN
N
N
NNS
S
S
SSS R
S R
S R
S RS Re
e
e
eec
c
c
cce
e
e
eei
i
i
iiv
v
v
vve
e
e
eer
r
r
rr
7
Quick
Quick
Quick
Quick Quick Star
Star
Star
StarStart
t
t
tt
Steps to Use
Connect the P-7 Pro to the external active antenna, and
tighten the antenna connector clockwise.
Place the external active antenna in a position with a good
view of the sky, such as the roof of the car, the top of the
surveying pole.
The main unit of the P-7 Pro is not waterproof.
The placement of the antenna significantly affects the
accuracy of the tracks. For more placement
suggestions, please visit: cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/qcbgps.com/p7/q
The positioning status of the satellite needs to be
viewed on the terminal device.
Connect to the Terminal Device
The P-7 Pro supports two connection modes: wired and
wireless. Both connection modes are supported to connect
the device simultaneously.
DEVICE
12
DEVICE
3
The operating systems and connection modes supported by
the P-7 Pro are as follows:
Linux
USB
SPP
USB
SPP
USB
SPP
BLE
USB OTG
SPP/BLE
BLE
Plug the USB connector into
the computer.
Wired C
Wired C
Wired C
Wired CWired Connection
onnection
onnection
onnectiononnection
Plug the USB connector into
the mobile device via an OTG
cable.
4
4
4
444
How to connect with terminal
device please visit:
When wired, it supports hardware-level dual serial ports:
“Enhanced COM Port and “Standard COM Port”.
The P-7 Pro can be accessed by two programs simultaneously,
and the parameters of the P-7 Pro can be configured through
the Enhanced COM Port.
× ×
21
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/qcbgps.com/p7/q
Connect with the power
bank during portable use.
Bluetooth Connection
Bluetooth Connection
Bluetooth Connection
Bluetooth ConnectionBluetooth Connection
Connect with the car charger
while driving.
BLE
5.1
SPP
2.1
How to connect with the App, please visit:
The P-7 Pro supports two Bluetooth protocols:
BLE5.1 and SPP 2.1.
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/qcbgps.com/p7/q
5
5
5
555


Produkt Specifikationer

Mærke: Columbus
Kategori: Ikke kategoriseret
Model: P-7 Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til Columbus P-7 Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Columbus Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer