GREAT BRITAIN CUSTOMER SERVICE •
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mail internet postal
Ver. 20170612
Cotech Smart Home
OutdoorRemote Switch
Art.no 36-6758 Model 52008X36 + 50074
Please read theentire instruction manual before using thepro-
duct and then save it for future reference. We reserve theright
for any errors in text or images and any necessary changes
made to technicaldata. In theevent of technical problems or
other queries, please contact our Customer Services.
Operating instructions
Installation
4. Remove theplastic tab
to activate thebattery in
theremote control.
5. Press thespecific button
on the [ ON ] side of
theremote to select
thecorresponding channel
(A, B, C or D) you want
to pair with thereceiver.
TheLED indicator button
will shine briefly to indicate
that pairing is complete.
6. Plug alight into theremote
switch and make sure that
it is switchedon.
Remote control
• Clean theremote control by wiping it with adrycloth.
• Remove thebattery from theremote control and store
it in adry, dust-free environment and out of thereach of
children whenever it is not to be used for anextended
period.
Responsible disposal
1. Plug theremote switch
into awall socket.
2. Hold in thebutton on
thefront of thereceiver
for at least 3 seconds
and then releaseit.
3. TheLED in thebutton
will start flashing slowly.
Thereceiver is now
ready to be paired
with aremote control/
transmitter. Note:
Thebutton will begin to
flash after it has been
released. Ifthebutton is
flashing when it is being
pressed, thepairing will
not be successful.
7. Turn thelight on or off using the [ ON ]/[ OFF ] buttons on
theremote control.
Care and maintenance
Receiver
• Always unplug thereceiver before cleaning it with
adampcloth. Useonly mild cleaning agents, never
solvents or corrosive chemicals. Makesure that
thereceiver is completely dry before plugging it backin.
• If it is not to be used for anextended period, thereceiver
should be unplugged from thewall socket and stored in
adry, dust-free environment, out of children’sreach.
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by
incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial
can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your
local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Receiver
Mains voltage 230 V AC, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Load (resistive) 0–3680 W
Load (inductive) 0–613 W
Remote control
Battery 1×CR2032
Frequency 433.92 MHz
