Cotech S1J-AJ8-10 Manual


Læs gratis den danske manual til Cotech S1J-AJ8-10 (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Cotech S1J-AJ8-10, eller vil du spørge andre brugere om produktet?

Side 1/24
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Gravyrpenna
Graverpenn
Kaiverruskynä
Art.no Model
18-3028 S1J-AJ8-10-UK
30-9128 S1J-AJ8-10
ENGLISHSVENSKANORSKSUOMI
Engraving Tool
Ver. 200802
2
ENGLISH
Engraving Tool
Art.no: 18-3028 Model: S1J-AJ8-10-UK
30-9128 S1J-AJ8-10
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photographic errors and any changes in technical
data. If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse.)
Safety Warnings Common for grinding,
sanding, wire brushing, polishing or abrasive
cutting-off operations
a) This power tool is intended to function as a grinder, sander, wire brush
or cut-off tool. Read all safety warnings, instructions, illustrations
and specications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, re and/or serious injury.
b) Operations such as polishing are not recommended to be performed with
this power tool. Operations for which the power tool was not designed may
create a hazard and cause personal injury.
c) Do not use accessories which are not specically designed and
recommended by the tool manufacturer. Just because the accessory can
be attached to your power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at least equal to the maximum
speed marked on the power tool. accessories running faster than their rated
speed can break and y apart.
e) The outside diameter and the thickness of your accessory must be within
the capacity rating of your power tool. Incorrectly sized accessories cannot
be adequately guarded or controlled.
f) The arbour size of wheels, anges, backing pads or any other accessory
must properly t the spindle of the power tool. Accessories with arbour
holes that do not match the mounting hardware of the power tool will run out of
balance, vibrate excessively and may cause loss of control.
g) Do not use a damaged accessory. Before each use inspect the accessory
such as abrasive wheels for chips and cracks, backing pad for cracks,
tear or excess wear, wire brush for loose or cracked wires. If the power
tool or accessory is dropped, inspect for damage or install an undamaged
accessory. After inspecting and installing an accessory, position yourself and
bystanders away from the plane of the rotating accessory and run the power


Produkt Specifikationer

Mærke: Cotech
Kategori: Ikke kategoriseret
Model: S1J-AJ8-10

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech S1J-AJ8-10 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Cotech Manualer

Cotech

Cotech HT7715 Manual

18 September 2024
Cotech

Cotech K-CPL-LS4W-IR-S3 Manual

16 September 2024
Cotech

Cotech J1x-JF2-210/20 Manual

14 September 2024
Cotech

Cotech TD9511-3 Manual

12 September 2024
Cotech

Cotech S1J-AJ8-10 Manual

31 August 2024
Cotech

Cotech J5218D Manual

27 August 2024
Cotech

Cotech 50053 Manual

27 August 2024
Cotech

Cotech 51097X23 Manual

27 August 2024
Cotech

Cotech 36-6286 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer