Cotech EMT757 Manual

Cotech Ikke kategoriseret EMT757

Læs gratis den danske manual til Cotech EMT757 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Cotech EMT757, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
Ver. 20141216
Use
Time display
The clock is showing 12 or 24 hour display. To change between 12 and 24 hour
display, press and hold until the display changes the time format. CLOCK
• At 12 hour display AM or PM is shown on the display.
• At 24 hour display neither AM nor PM is shown on the display.
Set time
Note: The time switch must be in normal mode (time) before setting
of time and week day. Push to return to normal mode.CLOCK
1. Push and hold until the week indicator blinks. SET
2. Push ▲ ▼+ to change week day forward, or - to change week day
backwards. The selected week day is shown in the display.
3. Push SET to confirm. The hour setting blinks in the display.
4. Use ▲ ▼+ and - to set hours.
5. Push SET to confirm. The minute setting blinks in the display.
6. Use ▲ ▼+ and - to set minutes.
7. Push CLOCK to return to normal mode.
Summer/Winter time
Press and at the same time to switch between summer and CLOCK ▼-
winter time. is shown on the display to indicate summer time. S
Installation of programme
1. Push ON/OFF to set the time switch in AUTO mode.
2. When the display is in normal mode, press to return to settings mode. ▲+
1ON is shown on the display’s bottom left corner.
“1” indicates program number 1 (of 20).
“ON” indicates the time for activation.
“OFF” indicates the time for off activation.
3. Use ▲ ▼+ and - to change the program number according to
the following sequence:
1ON 1OFF 20ON 20OFF d ON/OFF→ → …… → → (countdown)
4. After selected program, push to set week day for on and off activation. SET
5. Use ▲+ to change week days. The days will be changed in the following
combinations:
MO TU WE TH FR SA SU; MO TU WE TH FR SA SU: → → → → → →
MO WE FR; TU TH SA; SA SU; MO TU WE; TH FR SA;
MO TU WE TH FR; MO TU WE TH FR SA
6. Push SET to confirm. The hour setting blinks in the display.
7. Use ▲ ▼+ and - to set hours.
8. Push SET to confirm. The minute setting blinks in the display.
9. Use ▲ ▼+ and - to set minutes.
10. Press CLOCK to return to normal mode.
Countdown function
Set the countdown time
The countdown interval is from 1 second to 99 hours, 59 minutes and 59 seconds.
1. When the display is in normal mode, press to return to the countdown ▼-
function. The display shows or . d ON d OFF
d indicates that the countdown function is activated.
2. Push SET ON OFF until or blinks on the display.
3. Use ▲ ▼+ and - ON OFF to switch between or .
ON Set the duration for how long the device/output will be ON (the device/
output will be turned off after the countdown). set the duration for how OFF
long the device/output will be OFF (the device/output will be turned on after
the countdown).
4. Push SET to confirm. The timer display blinks.
5. Use ▲ ▼+ and - to set hours.
6. Push SET to confirm. The minutes display blinks.
7. Use ▲ ▼+ and - to set minutes.
8. Push SET to confirm. The seconds blink.
9. Use ▲ ▼+ and - to set seconds.
10. Push SET CLOCK to confirm and then push to return to normal mode.
Start the countdown
1. Set the countdown time according to the instructions above.
2. Connect the device to the time switch and connect the time switch
to a wall socket.
3. Push ON/OFF AUTO to set the time switch in mode.
4. Push CD to start the countdown function. CD will blink to confirm that CD-
mode is activated.
5. When the countdown has come to 00:00:00, the e.g. lamp turns on
or off depending on what has been programmed.
Random on and off activation
1. Connect the device to the time switch and connect the time switch
to a wall socket.
2. Push ON/OFF to set the time switch in AUTO mode.
3. Push RND. An icon with the letter R will appear to confirm that the RND-
mode is activated. The output is now off for 26 to 42 minutes before it
randomly turns on. The output then stays on for 10 to 26 minutes before it
turns off again.
Turning the lamp on and off manually
Push to manually activate or deactivate the time switch. ON/OFF
ON The voltage turns on regardless of the setting and the connected
device can be used.
AUTO The time switch operates according to pre-set program.
OFF The voltage turns off and the connected device cannot be used.
Safety
• The time switch is intended for use indoors and may be used outdoors!not
• Devices connected to the time switch must be constructed for the same
voltage according to the specifications below.
• The built-in batteries are fully charged after approx. 2 hours use.
Disposal
Follow local ordinances when disposing this product. If you are unsure about
the disposal of this product contact your municipality.
Specifications
Mains Supply 230 V AC, 50 Hz
Max load 1800 W
Operating Temperature 0–55 °C
Class IP20
Minimum time interval 1 minute
1. LCD-display
2. – Indication on the display for summer time.S
3. – Press to return to normal mode (time).CLOCK
4. – Sets time and week day and also confirms settings. SET
5. – Adjusts time, week, and program group.▼-
6. – Adjusts time, week, and program group. ▲+
7. – Changes function on the time switch. ON, AUTO or OFF.ON/OFF
8. – Randomly activates on and off when the time switch RND
is in AUTO mode.
9. – Starts or stops the countdown function when the time switch CD
is in AUTO mode.
10. RESET – Press one time to reset the time switch to factory settings.
11. Plug socket
Digital time switch
Art.no Modell 18-2029 EMT757-UK
18-2175 EMT757-UK
36-2901 EMT757
36-4600 EMT757
36-5035 EMT757x2
Please read the entire instruction manual before using the product and save
it for future reference. We apologise for any text or photographic errors and
any changes in technical data. If you have any questions concerning technical
problems please contact our Customer Service Department.
Product Description
Digital time switch with 20 on/off activations per day.
• CD
• Random function (random on and off activation)
• LCD-display
• Safety shuttered socket
Buttons and Functions
5
6
7
8
9
10
1
2
3
4
11

Produkt Specifikationer

Mærke: Cotech
Kategori: Ikke kategoriseret
Model: EMT757

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech EMT757 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Cotech Manualer

Cotech

Cotech HT7715 Manual

18 September 2024
Cotech

Cotech K-CPL-LS4W-IR-S3 Manual

16 September 2024
Cotech

Cotech J1x-JF2-210/20 Manual

14 September 2024
Cotech

Cotech TD9511-3 Manual

12 September 2024
Cotech

Cotech S1J-AJ8-10 Manual

31 August 2024
Cotech

Cotech J5218D Manual

27 August 2024
Cotech

Cotech 50053 Manual

27 August 2024
Cotech

Cotech 51097X23 Manual

27 August 2024
Cotech

Cotech HT8750-EUCLA Manual

27 August 2024
Cotech

Cotech 36-6286 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Draper

Draper 29358 Manual

9 December 2025
BakkerElkhuizen

BakkerElkhuizen Ergo-Q 160 Manual

9 December 2025
Matrox

Matrox LUMA Pro A310 Quad Manual

9 December 2025
Opticis

Opticis HDHF-4K Manual

9 December 2025
JET

JET JCT-2611 Manual

9 December 2025
Homedics

Homedics Body Bubbles BA-M200 Manual

9 December 2025
Homedics

Homedics BK-P300 Manual

9 December 2025
SkyRC

SkyRC BD350 Manual

9 December 2025
Melchioni

Melchioni SIBERIA 45 Manual

9 December 2025
NEO Tools

NEO Tools 57-621 Manual

9 December 2025