Cotech GS-LTL2060 Manual


Læs nedenfor 📖 manual på dansk for Cotech GS-LTL2060 (5 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 10 personer og blev bedømt med 5.0 stjerner i gennemsnit af 5.5 brugere

Side 1/5
English
GREAT BRITAIN customer service
tel: 08545 300 9799 customerservice@clasohlson.co.uk www.clasohlson.com/uke-mail: internet:
Ver. 20131017
LED Tail Light
Art.no 36-4979 Model GS-LTL2060
Please read theentire instruction manual before using theproduct
and save it for future reference. We reserve theright for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Assembly
This tail light is E-marked, watertight and approved for use on
utility and boat trailers.
Note: Bear in mind that this tail light must be positioned in
thesame place and at thesame angle as theprevious light
in order for thetrailer to meet legal requirements.
1. Use thehole drilling template to mark out theposition for
theholes if new ones need to be drilled. Be careful not to
damage any hidden electrical wires when drilling.
2. Try to keep theelectrical connection between thetail light
and thecar as watertight as possible. Follow this
wiring guide:
Cable colour Function
Red Break light
Brown Tail light
Yellow Indicator
White Earth
Note:
The low current draw required to power thenew LED trailer
lights can “fool” theelectrical system of some modern vehicles.
This can cause fault warning lights to activate, indicators to
flash too quickly or thelights to stop working altogether.
These symptoms can be aleviated by theuse of load resistors
or flash relays designed for LED lighting systems. Refer to your
vehicle’s instruction manual.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.
Specifications
Voltage 12 V DC
Wattage Indicator/break light 1.6 W
Tail light 0.5 W
Size 150 × 80 × 23 mm
Svenska
SVERIGE • kundtjänst tel. fax e-post internet 0247/445 00 0247/445 09 kundservice@clasohlson.se www.clasohlson.se
Ver. 20131017
Baklykta LED
Art.nr 36-4979 Modell GS-LTL2060
Läs igenom hela bruksanvisningen före användning och spara
den sedan för framtida bruk. Vi reserverar oss för ev. text- och
bildfel samt ändringar av tekniska data. Vid tekniska problem
eller andra frågor, kontakta vår kundtjänst.
Montering
Baklyktan är E-märkt, vattentät och godkänd för montering på
exempelvis släpvagnar och båtsläp.
Obs! Tänk på att baklyktan måste monteras på samma plats
och isamma vinkel som tidigare belysning för att släpet ska
godkännas vid kontrollbesiktning.
1. Använd medföljande hålbildsmall för att markera var ev. nya
fästhål för baklyktan behöver borras. Var försiktig så att inte
befintligt kablage skadas vid borrning.
2. Tänk på att göra anslutningspunkten mellan baklyktans
och bilens kablar vattentät för bästa funktion. Anslut sedan
kablarna enligt kopplingsschema:
Kabelfärg Funktion
Röd Stoppljus
Brun Bakljus
Gul Blinkers
Vit Jord
Obs!
På vissa nyare bilmodeller kan den låga strömförbrukningen
hos ettanslutet släp utrustat med LED-lampor ienstaka fall
”lura” bilens elsystem. Detta kan leda till att ev. varningssystem
för trasiga glödlampor aktiveras, att blinkers blinkar för snabbt
eller att belysningen inte fungerar alls. Detta avhjälps genom att
använda effektmotstånd eller blinkrelä avsett för LED-belysning.
Se bilens instruktionsbok.
Avfallshantering
När du ska göra dig av med produkten ska detta ske enligt
lokala föreskrifter. Är du osäker på hur du ska gå tillväga,
kontakta din kommun.
Specifikationer
Anslutning 12 V
Effekt Blinkers/bromsljus 1,6 W
Bakljus 0,5 W
Mått 150×80×23 mm


Produkt Specifikationer

Mærke: Cotech
Kategori: Ikke kategoriseret
Model: GS-LTL2060

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech GS-LTL2060 stil et spørgsmål nedenfor, og andre brugere vil svare dig