Cotech SP-LS3M30LRGB-01B Manual

Cotech Ikke kategoriseret SP-LS3M30LRGB-01B

Læs gratis den danske manual til Cotech SP-LS3M30LRGB-01B (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Cotech SP-LS3M30LRGB-01B, eller vil du spørge andre brugere om produktet?

Side 1/5
GREAT BRITAIN CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mail internet postal
F
G
H
I
J
K
A B C D
L
EM
Ver. 20200825
RGB Flexible LED Light Strip
Art.no 36-7237 Model SP-LS3M30LRGB-01B
Please read theentire instruction manual before use and then save it for future
reference. We reserve theright for any errors in text or images and any necessary
changes made to technical data. In theevent of technical problems or other queries,
please contact our Customer.
Safety
Warning
Neither theproduct nor its mains adapter may be dismantled or modified in any way.
Never use theproduct if it, themains lead or themains adapter is in any way
damaged or malfunctioning. Unplug it immediately in case of injury.
Do not use theproduct in explosive atmospheres or in thepresence of flammable
liquids or gases.
Theproduct must only be connected to theincluded mains adapter.
Never connect several or other types of devices to themains adapter.
Themains lead must never be replaced. Theproduct must be discarded if it is
damaged in any way.
Theproduct must not be installed on awet or electrically conductive surface.
Make sure that thecables are not damaged whilst theproduct is being installed.
Themains lead must not be crushed or damaged, protect it from sharp edges,
oil and heat.
Always unplug theproduct from thewall outlet when it is not in use.
Do not carry theproduct using themains lead and do not use it for other
incompatible purposes.
Themains lead must not be shortened or cut.
Important
Thebulbs cannot be replaced. When theLED strip has reached theend of its
service life, theentire product must be discarded.
This product is designed exclusively for private use.
Product description
Remote control
A) [ ] Increase brightness or
Quicker light effect
B) [ ] Decrease brightness or
Slower light effect
C) [ OFF ]
D) [ ON ]
E) [ B ] Blue light
F) [ W ] White light
G) [ FLASH ] Light effect
H) [ STROBE ] Light effect
I) [ FADE ] Light effect
J) [ SMOOTH ] Light effect
K) Colour nuances
L) [ R ] Red light
M) [ G ] Green light
Risk for eye damage. Do not look directly at thelights/LEDs.
Theproduct is not suitable for household illumination.
This product is intended for indoor use only.
Class II mains adapter.
Class III string light.
Assembly
Information
TheLED strip can be mounted using double-sided adhesive tape. For best adhesion,
ensure that thesurface is clean, dry and free of grease.
1. If necessary, thelength of theLED
strip can be adjusted by cutting it at
one of themarkings (every 10cm
along thelength of thestrip).
2. Remove theprotective film from
thetape on theback of thelight
strip and attach it to thedesired
location.
3. Attach theLED control to thelight
strip.
4. Connect themains adapter to theLED control unit.
5. Plug themains adapter into awall socket.
Instructions for use
. Thelight strip will always turn on with thelast used setting.Information
1. Press [ ON ] (D) to turn thelight strip on.
2. Press [ ] (A) Increase brightness or Quicker light effect.
3. Press [ ] (B) Decrease brightness or Slower light effect.
4. Press any of thebuttons to select thecolour of thelight.
5. [ R ] (L) = red.
6. [ G ] (M) = green.
7. [ B ] (E) = blue.
8. [ W ] (F) = white.
9. (K) = 12 nuances within theRGB spectrum.
10. Press any of thebuttons to select thelight effect.
11. [ FLASH ] (G): 3 colours that change without merging.
12. [ STROBE ] (H): 6 colours that merge into one another.
13. [ FADE ] (I): 8 colours that merge into one another..
14. [ SMOOTH ] (J): 7 colours that change without merging.
15. Press [ OFF ] (C) to turn off thelight strip.
Care and maintenance
Unplug themains lead from thewall socket before cleaning.
Theproduct should be cleaned using adry cloth or vacuum cleaner, when necessary.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout theentire EU. In order
to prevent any harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible manner. When
recycling theproduct, take it to your local collection facility or contact
theplace of purchase. They will ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Make sure there are Note:
no obstacles between theLED
control unit’s IR receiver and
theremote control.
Mains adapter
Input 100-240 V AC, 50/60 Hz
Power 18 W
Output 12 V DC
Light strip
Size 3000×10 mm
Bulb 90×LED
Rated voltage 12 V DC
Rated power 18 W
Operating
temperature −20 +45 °C
LED control unit
Rated voltage 12 V DC
Remote control
Range Max. 5 m
Battery 1×CR2025 (included)


Produkt Specifikationer

Mærke: Cotech
Kategori: Ikke kategoriseret
Model: SP-LS3M30LRGB-01B

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech SP-LS3M30LRGB-01B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Cotech Manualer

Cotech

Cotech HT7715 Manual

18 September 2024
Cotech

Cotech K-CPL-LS4W-IR-S3 Manual

16 September 2024
Cotech

Cotech J1x-JF2-210/20 Manual

14 September 2024
Cotech

Cotech TD9511-3 Manual

12 September 2024
Cotech

Cotech S1J-AJ8-10 Manual

31 August 2024
Cotech

Cotech J5218D Manual

27 August 2024
Cotech

Cotech 50053 Manual

27 August 2024
Cotech

Cotech 51097X23 Manual

27 August 2024
Cotech

Cotech 36-6286 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer